Beckman Coulter BioMek FXP Laboratory Automation Workstation System Faulty NOTE - THIS IS A SPARES/REPAIRS ITEM

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Varian CP-3800/3380 Gas Chromatograph GC System & Model 8400 Autosampler was removed from a (more) university lab where it was surplus to requirements. The information plate suggests this system was built in 2004. The GC powered on and completed self-calibration with no issues. The oven was tested at 200C and measured at that with our digital thermometer (thermometer not included in the sale). The autosampler also powered on with the main unit and went through self-calibration. It was not tested further. It is in good condition with only minor marks from use.

Perkin Elmer Chemagic 360 DNA Extractor Magnetic Separator System This system was removed from a uni (more)versity where it was surplus to requirement. It is in good cosmetic condition and powers on. We tested the system with a security key taken from another Chemagic we had in stock, although the system booted up it displayed a 'Door Open' error that prevented the system from initializing.Due to this, this system is listed as Spares/Repair. Security Key not included. This system also includes the following: - Chemagic 96-rod head - Instruction manual - Touch-screen monitor - 5 x 96 well microplates/holders - 1 x Newland wired scanners with stand - table

Foss Tecator FIAstar 5000 Analyzer with 5027 Sampler This item was removed from a university lab whe (more)re it was surplus to requirements. The analyser powers on and is in very good cosmetic condition with minimal wear. The peristaltic pump operates as intended. Specifications:- Model: FIAstar 5000 Analyzer - Serial No.: 50000338 - Part No.: 10009732 Includes:- Mascot Power Supply (Type: 9320) Foss Tecator 5027 Sampler- Model: 5027 Sampler - Serial No.: 1865 - Part No.: 50003610 The sampler powers on, self-calibrates, and is in good cosmetic condition. No further testing conducted.

Eppendorf epMotion 5075 Liquid Handler Laboratory Automation Robot & Software This was removed f (more)rom a university lab where it was surplus to requirements. The unit powers up and the system and the PC communicate. We were able to get the tool holder to unlock and lock. It is showing a temperature unit module 1 issue. It is in good cosmetic condition with marks from use. Model - epMotion 5075SN - 5075 01005 Siemens Simatic PCEppendorf 6BK1800-0EP00-0AA0 Monitor not included.

Agilent Technologies G5057A Head 96ST Bravo Automated Liquid Handling This item was removed from a u (more)niversity where it was surplus to requirement. The item is in excellent cosmetic condition and has been extracted from a functioning system. We are unable to conduct testing for this item at our facility. Most recent service record - Last Service Date: 02-03-2023 - Service Engineer Email: [email protected]

Varioshake shaking incubator These LAUDA tools are renowned for being extremely reliable and suitabl (more)e for heavy use. Specialized in gentle mixing and vigorous shaking, these shaking incubators are used for applications that require repeatable orbital movements and temperatures up to +70°C with excellent stability. They are preferred by standard or research laboratories for incubation, fermentation, homogenization, chemical and biochemical reactions, enzyme and tissue studies, as well as for the cultivation of bacterial cultures. Applications: homogenization, incubation, fermentation or chemical and biochemical reactions. The control panel features soft-touch keys with clear symbols. It will therefore be very easy to set the temperature, the stirring frequency or the incubation time quickly and precisely, rest assured that the technology of these instruments will exactly reproduce the set values. The temperature - Temperature regulation is controlled by a microprocessor, PID type with RS232 interface. - The temperature distribution is optimal throughout the interior of the cabinet. - Temperature setting and display: digital, LED, in 0.1°C increments. - Temperature range: from 8°C above ambient temperature to + 70°C. - Temperature range (with cooling coil; not included): 20 to 70°C, depending on the cooling medium used and the ambient temperature. - Electronic monitoring of the temperature controllers activates visual and acoustic alarms in the event of a fault. In these cases the heating switches off automatically and the cause of the anomaly is shown on the display. Agitation and Incubation - Quiet and robust stirring mechanism with gentle start and smooth, load-independent orbital motion - The orbital motion can be turned on and off - Shaking frequency and incubation time can be set thanks to the microprocessor. - The timer continuously displays the remaining incubation time and acoustically signals its expiration. Specific features of the VS 60 OI model This model, with a liftable acrylic glass cover, consists of an external housing made of electrolytically galvanized and powder-coated sheet steel. The vibrating platform, made of aluminum, has 4 plastic pins to accommodate a vibrating tray or a universal support. - Stirring width: 30 mm - Usable volume 68 L - Shaking frequency min. 20 min-1 - Shaking frequency max. 250 min-1 - Shaking width 30 mm - Load capacity max. 12 kg - Timer from 1 minute to 999 - Vibrating platform width 450 mm - Vibrating platform depth 450 mm - Capacity approx. 60 L / 1 stirring tray

This listing is for a Kyosha KyoLine C029-k5 Printer.The unit is in full working condition and is re (more)ady for immidate realese.The Kyosha KyoLine Printer series consists of compact and portable thermal printers designed for mobile applications. They are widely recognized for their affordability, reliability, and the ability to provide bi-directional thermal printing, ensuring high efficiency and accuracy. These printers are suited for industries that require quick, on-the-go printing, such as logistics, retail, and healthcare.Key Features:Compact & Portable: The KyoLine series is designed for mobility, making it ideal for field operations or environments with limited space.Bi-directional Thermal Printing: The moving head thermal system ensures consistent, high-quality printing by enabling bi-directional print movement.Printing Speed: Prints at a steady rate of 1.4 lines per second, suitable for quick and efficient receipt or label printing.Quiet Operation: The thermal printing mechanism produces minimal noise, ideal for environments where quiet operation is required.Wireless Connectivity: Equipped with various connectivity options including:RS232 and TTL serial connections for wired integration.Bluetooth for seamless wireless operation, enhancing portability and ease of use.Customizable: Kyosha offers customization options to adapt the printers to specific customer needs, making them versatile for various industry applications.High-Grade Thermal Paper: Designed to work with high-grade thermal paper, ensuring clear and durable prints.

This Thermo Scientific VersaCool Refrigerated Circulating Water Bath was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and is in very good cosmetic condition. It was tested with a digital thermometer (not included). Heating:-Tested with water, the temperature was set to 37˚c, the temperature quickly went up to 38˚c while the thermometer read 37˚c. It was then tested up to the maximum temperature (for water) of 90˚c which it reached after around 10 minutes, thermometer also read 90˚c. It can go higher but we didn't want it to boil. It is rated for 150˚C. Cooling:-Tested with Antifreeze, the temperature was set to -20˚c, it dropped quite quickly to -8˚c but seemed to stop cooling from there, only dropping a further 0.3˚c over the next few hours. The thermometer read -9.6˚c. This is likely due to the concentration of antifreeze used.

MARSHALL Select MS-PA200UL Autoclavable Pipette, 20-200ul Volume Range 20 to 200ul Increment 1ul Pip (more)ette Type Manual Air Displacement Features - Configurable from 20 to 200 ul for versatile sample handling - Offers 1 ul increments for precise volume adjustments - Serializable at 121°C without special preparation - Reduces hand strain and minimizes repetitive strain injuries - Clearly shows volume settings for quick adjustments - Ensures long-term reliable performance - Minimizes risk of repetitive strain injuries for user comfort The MARSHALL Select MS-PA200UL Autoclavable Pipette is engineered to provide precision and efficiency for a wide range of laboratory applications. This pipette features an adjustable volume range from 20 to 200 µl with 1 µl increments, ensuring precise control and versatility for various tasks. It delivers systematic error rates of 3% at 20 µl, 0.8% at 100 µl, and 0.6% at 200 µl, along with random error rates of 1% at 20 µl, 0.3% at 100 µl, and 0.15% at 200 µl, offering high accuracy and reliability. The lightweight, ergonomic design reduces hand strain and minimizes the risk of repetitive strain injuries, making it comfortable for extended use. Its centrally located digital display is easy to read for both left- and right-handed users, enhancing usability. A rotating counter knob allows for quick volume adjustments, while a quick-release pipette tip ejector ensures convenient tip changes. Built with innovative materials, this pipette is easy to calibrate and maintain, ensuring consistent performance over time. Fully autoclavable at 121°C, the MS-PA200UL allows for thorough sterilization without special preparation, maintaining sterility and performance. After autoclaving, it can be cooled and dried over 12 hours, ready for immediate reuse. The pipette features a volume lock to prevent accidental adjustments and is compatible with universal pipette tips, supporting both forward and reverse pipetting techniques. This versatility makes it suitable for handling a wide range of sample viscosities, from low-viscosity liquids to higher-viscosity or foamy samples. As part of a comprehensive range covering volumes from 0.1 µl to 10 ml, the MS-PA200UL provides flexibility across diverse applications. With its robust construction and user-friendly features, this pipette is an indispensable tool for laboratories seeking precision and efficiency in liquid handling.INCLUDED: The MARSHALL Select MS-PA200UL Autoclavable Pipette, 20-200ul includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Thermo Scientific TX-750 Swing Bucket Rotor, Cat. #: 75003180 The Thermo Scientific TX-750 Swing Buc (more)ket Rotor, Cat. #: 75003180, is a centrifuge rotor designed for use with the Thermo Scientific ST40/ST40R, XT/XTR/XF/XFR, Megafuge™ 40/40R, Multifuge™ X3/X3R, and Thermo Scientific SL40/40R centrifuges . This rotor has a maximum speed of 4,700 RPM and a maximum relative centrifugal force (RCF) of 4,816 x g. It can accommodate a maximum capacity of up to 4 x 750ml, making it suitable for a range of applications including cell culture work, blood separation, microbiology, genomics and more. INCLUDED: The Thermo Scientific TX-750 Swing Bucket Rotor, Cat. #: 75003180 includes: - Thermo Scientific TX-750 Swing Bucket Rotor - 6 Months Parts and Labor Warranty Thermo Scientific TX-750 Swing Bucket Rotor, Cat. #: 75003180 SpecificationsMaximum Speed4,700 RPMMaximum RCF4,816 x gMaximum Capacity4 x 750mlMaximum Radius19.5 cmMinimum Radius8.3 cmCentrifuge CompatibilityThermo Scientific ST40/ST40R, XT/XTR/XF/XFR, Megafuge™ 40/40R, Multifuge™ X3/X3R, and Thermo Scientific SL40/40R centrifugesDownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote .downloads-section { justify-content: center; }

Hermle Z327 Centrifuge Blood Tube Bundle w/ Swing Out Rotor for 1.8-7ml and 8-10ml Tubes Speed Range (more) 200 to 18,000 RPM (4,500 RPM with included rotor) Maximum Capacity 4 x 200ml Warranty 5 Year Manufacturer's Features - Maintenance-free induction drive - Microprocessor with large LCD display - Motor driven lid lock - Automatic radio-frequency rotor identification system (RFID) with over speed protection, immediately upon rotor insertion - Active imbalance identification and cut-off (rotor specific) - A large variety of rotors and accessories - Audible signal at the end of each run with several melody options - Noise level under 63 dBA at max. speed - Manufactured according to international safety regulations, i.e. IEC 61010 - Rotor exchange is easy to handle - Optimized airflow system keeps the samples cool (Z327) - Stainless steel chamber The Hermle Z327 Centrifuge Blood Tube Bundle w/ Swing Out Rotor for 1.8-7ml and 8-10ml Tubes is a high-performance centrifuge capable of speeds ranging from 200 to 18,000 RPM (4,500 RPM with the included rotor), with a maximum RCF of 23,542 x g (3,350 x g with the included rotor). With a maximum capacity of 4 x 200ml, this centrifuge is ideal for a variety of applications in the life sciences, including tissue culture and molecular biology. Its timer allows for up to 99 hours and 59 minutes of operation, with the option for continuous use. The Hermle Z327 also has the ability to store up to 99 programs, making it highly customizable for specific experimental protocols. Both the Z327 and the refrigerated Z327-K offer a wide assortment of rotor options (up to 19), making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high-volume fixed angle rotors is very simple and can be done in a matter of seconds. The Z327-K features rear mounted refrigeration system, optimized for saving space on the lab bench at only 40 cm wide! Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z327 Centrifuge Blood Tube Bundle w/ Swing Out Rotor for 1.8-7ml and 8-10ml Tubes includes: - Z327 Centrifuge - Z327-200 4 x 200ml Swing Out Rotor and 4 x Z327-200-BUK Buckets - 2 x Z327-200-A57 8 x 1.8-7ml Blood Tube Inserts for Z327-200-BUK - 2 x Z327-200-A10 7 x 10/15ml Round Inserts for Z327-200-BUK - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty