Amorgard ScrubKart Mobile Hand Wash Station with 4 x Water Containers Lab

This Thermo Scientific Matrix Hydra II Automated Liquid Handling System was removed from a universit (more)y lab where it was surplus to requirements. The system is in good cosmetic condition with marks from use. All modules power up. We had a service engineer inspect and test this system after setting up and connecting all the electronic connectors but not the pipes. The 1-channel nanofill mechanism was stuck so they took it apart and lubricated it. It's now working fine and can be controlled by the PC. The matrix stage is working fine and can be controlled by the PC but the dispenser is not working. The Hydra pump Module: They have changed the two fan guards with better ones and cleaned the fan. Now they are looking better. This module is working fine and communicates with the PC as normal. We can run test protocols but from time to time we got some error messages. I think that because the fact we have not used any liquid and the system sends feedback when the liquid passed through some parts. The system is made up of the following; 1 x Matrix Hydra IICat no. 109610 1 x Matrix 2 Position Stage 1 x Apogent Discoveries Matix Hydro Pump ModuleThe unit powers on with all 3 Fills working. 1 x Matrix P1 Control Box 1 x Innovadyne 1-Channel NanofillThe unit powers up. 1 x Grant Instruments Type MS1The unit powers up. Dell Laptop with Microsoft MouseModel - PP04XHydra II-Plus-One Control Software Version 3.1.3 InstalledThe unit powers up and the software runs. Software Discs:Matrix Hydra II-Plus-One Control Software Version 3.1.3Matrix Hydra II-Plus-One Control Software Version 3.1.2SuperLogics LE Software Suite Rev 2.92 x Socket Installation discs Various tubing and accessoriesOperating instructions

Beckman Coulter Biomek NXP Lab Automated Workstation With PC, Software, Tips This was removed from a (more) university lab where it was surplus to requirements. The lab confirmed that although it was installed in 2011, it had never been used once and is essentially brand neIt is in good cosmetic condition with minor marks from use. The system includes: Biomek NXP WorkstationSerial No. A318410608 Beckman Coulter FX Device ControllerCat No. 719366Serial No. 00717635AM0718110002 Beckman Coulter AccuframeSerial No. 00717820AG0711110001 ThinkCentre PC with Windows 7Serial No. 1S5852BL2MJWLDN9 Software:Biomek System Install Disk v3.3Beckman Coulter Sami Workstation Software v4.0Beckman Coulter Recovery DVD MORBK29ABiomek Tutorials v3.3Accounts and Permissions v3.1 Additional parts/Accessories:2 x Manuals Biomek NX and NXP v3.3 Tutorial1 x Active Curtain test rodBeckman Coulter P200 pipette tips 340 racks (96 tips/rack) in sealed boxes1 x Roylan Developments StoragePod Dundee serial No. 000224 15 x 14 x 40cm1 x complete front polycarbonate safety screen kit with all parts and fixings10 x data leads120 x 96 well plates, chimney well TC with lids5 x workstation table fittings9 x microplate holders1 x pipette exchanger holder12 x ferrite cable noise reducers

Grant Optima TC120-ST12 Recirculation Bath. Capacity 12 liters. Ambient temperature range +0 to 120  (more)° C. Stability ± 0.05ºC / Uniformity ± 0.1ºC. Stainless steel tank and immersion thermostat. Integrated pump for external circulation. User interface with marker and two function buttons. Low liquid detection. 2-point user calibration. Visual alarm. User manual. The Grant TC120-ST12 Recirculation Bath has applications, among others, in clinical, microbiology and atology laboratories for tempering, thawing and incubating media samples. In university research for the temperature control of spectrophotometers and refractometers and jacketed vessels. Temperature probe calibration, water analysis, quality control test product, petrochemical test, material test, milk sample test are used in industrial laboratories.

AIRTECH SMARTFLOW Class II-A2 biosafety cabinet. Working size 130x79x200 cm (LxFxW). Centrifugal tur (more)bine with adjustable speed. Flow rate upward 0.53 ± 0.025 m / s, downward 0.33 ± 0.025 m / s. 30/70 air recirculation (exhaust / recirculation). ULPA extraction and discharge filters (according to IEST-RP-CC001.3), with an efficiency of 99.999% for a particle size between 0.1 and 0.3 microns. Front window with double laminated glass. Stainless steel interior. Programmable germicidal UV and LED white light. Two interior plugs. LCD display with indicators of air flow, temperature and humidity of the work area, filter pressure, hours of UV light, hours of filter use. Eco operating mode. Incorrect air flow, filter replacement and front window height alarms. Support structure included. CE certified. Manufactured according to EN 12469; ISO 14644.1 (air quality); ISO29463 (filtration) and EN-61010-1 (electrical safety). Thanks to their highly efficient ULPA filters, AIRTECH SMARTFLOWAirtech BSC-1304 II A2 Class II-A2 biological safety cabinets are designed to protect both samples, the operator and the laboratory environment when working with potentially infectious agents. Its high qualities backed by a series of air quality certifications, filters, structure, electrical components and diversity of sizes provide the operator with the greatest comfort and safety when working. It can be used in hospitals, research centers and life science companies in general.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Eurotherm Process Automation System with TCS Tactician T1000 & Components This was removed from (more) a university lab where it was surplus to requirements. The unit is in reasonable cosmetic condition though the access panel of the switchboard has snapped all its hinges. These will need replacing to secure the unit. We were unable to power the unit or the TCS Tactician T1000 Controller It was not tested further. The cabinet is filled with electrical components.

F2 Mass Standard - carrier weights. Nominal value - 20 g.

RS 232 cable: scale (PUE C/31/H terminal) - computer. Lenght 5 m. Cable types: Standard P0259.2: 2 m (more) Customized P0259.5 (extra charge): 5 m Customized P0259.10 (extra charge): 10 m Compatible with: Scales operated via PUE H315 terminal Scales operated via PUE H315/Z terminal PUE H315 terminal PUE H315/Z terminal

C32 series is an advanced but at the same time an easy-to-use weighing instrument that can be operat (more)ed in various industry areas. To ensure precision, speed and excellent measurement repeatability, high quality electronic components are used. Software Integrated battery and wireless data transmission enable portable operation. Complex software allows carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. C32 series devices feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution assure easy and clear transmission of data on current process. Colour bar graph signals whether the weighing result is within declared thresholds thus significantly influencing performance. C32 weighing instruments cooperate with RLAB software for collecting, presenting and carrying out statistical analysis of measurements sent by the weighing equipment. The software enables advanced functions for generating and customizing graphs and reports. Programmable keypad Complex 22-key keypad features programmable function keys which enable its customization. Integrated infrared sensors facilitate activation of basic functions without use of a keypad, this will be appreciated by the owners of high precision instruments. Cooperation C32 weighing instruments cooperate with barcode scanners and printers, this feature is especially important for those operators who use the instruments for parts counting or any tasks requiring clear-cut identification of measured products. Communication Wide range of communication interfaces ensures easy integration of C32 instruments with external master IT systems and trouble-free data exchange. Integrated inputs/outputs available in the basic version of the weighing instrument enable cooperation with external devices, i.e. control buttons, light signalling towers, buzzers and any other controlling/signalling devices. They also provide the ability to control uncomplicated dosing processes. Database Various permissions levels assure safety of stored data and prevent unauthorized operators from modifying the settings. Complex databases of products, packaging and customers are very important for operators working with wide range of products and having an extensive sales network. Broad range of maximum capacities and readabilities guarantees selecting the right model for a particular application.

Ohaus AX2202 Adventurer Toploading BalanceStriking theideal balance between inventive features and f (more)unctional, uncomplicated weighingcapabilities, the Ohaus Adventurer Pro II AX2202 incorporates all of theapplications necessary for routine weighing and measurement activities. With acolor touchscreen, GLP/GMP compliance capabilities, two USB ports, and muchmore, Adventurer AX2202 is the most complete balance in its class. 2200 g capacity, 0.01 g readability 175 x 195 mm platform Internal calibration 4.3 inch Full-color VGA graphic touchscreen with user-controlled brightness RS232, USB Host, USB Device (included). GLP/GMP data output with real-time clock Selectable environmental filters, auto tare, user selectable span calibration points, software lockout and reset menu User selectable communication settings and data print options User definable project and user IDs Up to 9 operating languages Click Here to View Product Video INCLUDED: The Ohaus AX2202 Adventurer Toploading Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty