Heidolph Vacuum Seal (PTFE/FKM)

Stuart RE300 Rotary Evaporator. Speed range from 20 to 190rpm. Induction motor. Waterbath with capac (more)ity of 3.5 litres  and temperature range from ambient to 95 ºC. PTFE glassware included: diagonal coil condenser and vapour tube for diagonal condenser.  Flasks and clips not included. User manual.

Rotavapores pilot-scale RE-THE Series. Volumes of evaporation of 5 to 100 liters. Rotation Control a (more)nd digital temperature. Adjustable temperature up to 99ºC (optional bath oil temp. max. 180 ° C). Vacuum up to 3 mBar. Evaporation capacity of water of 2 to 9 L, depending on the model. Elevation of arm power. Bath and structure in stainless steel. Rubber gaskets teflon. Condenser vertical spiral with auxiliary unit for models with higher volumes. Optional: vacuum pump and chillers. It shows the price of the model RE-5. For other models refer to drop-down. Contact Galileo for information on optional accessories.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

IKA RV 10 Auto Pro Flex Rotary Evaporator Features - 4L heating bath optimized for rapid achievement (more) of working temperature, with a temperature safety circuit and boil-dry protection - Integrated vacuum controller and timer function - Bright, high-contrast, TFT, color-graphic control panel with simple menu navigation and programming for up to ten individual procedures - Automatic cooling water management, heating bath management, and ventilation - Right or left flask rotation with push-off mechanism for tightly-fitting flasks - Digital interfaces: USB port and RS-232 interface for remote control Motorized lift with Safety-Stop function, which lifts the receiving flask from the heating bath in case of a power failure Precise setting of distillation method per solvent with direct volume and efficiency control Integrated solvent library with 40 preset solvents and the ability to expand to incorporate new processes The completely revised RV 10 auto is the flagship of the IKA Rotation Evaporator product line. Its impressive features include an innovative handling concept with a bright, high-contrast, TFT, color-graphic control panel, an integrated vacuum controller, cooling water monitoring and mature safety standards. The RV 10 auto offer all properties required for efficient, safe, and cost-effective operations. These include automatic control of the vacuum and cooling water volume. Its intuitive handling concept quickly leads its users to their desired results in every application. Thanks to its extended ramp programming capability, the RV 10 auto allows users to carry out customized procedures. Other innovative features, such as smooth start, interval mode, right-left operation in interval mode, or the timer function for time-lapse tests, make everyday work in the laboratory much easier. Safety is ensured by the motorized lift with safety-stop function that automatically lifts the evaporation flask out of the heating bath in the case of power failure. Additional safety for users is provided by individually adjustable temperature safety circuits, protection against boiling dry, adjustable end-point recognition to prevent glass breakage, and a locking function. The receiving flask and the condenser are also available in coated versions. The USB port or the RS-232 interface enable remote control with the IKA “labworldsoft” software package and an update option with the firmware update tool. The device comes complete with vacuum hoses and hose connectors for your in-house cooling water supply. The new IKA Vacstar digital included in the package is controlled directly from the drive unit of the RV 10 auto via the data cable provided. INCLUDED The IKA RV 10 Auto Pro Flex Rotary Evaporator includes: - RV10 control - HB digital S099 Heating Bath - IKA VACSTAR digital Vacuum Pump - RV 05.10 Balljoint clamp - RV 10.89 Clamp NS 24 - RV 10.73 Vapor tube (NS 24/40) - RV 10.8001 Seal - RV 3.4 Woulff bottle - RV 3.1 Support pole - Vacuum hose (2 x 0.55 m) - Water discharge hose (1 x 1 m) - Water discharge hose (1 x 1 m) - USB cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 3 Year Warranty Extension with IKA Registration) IKA RV 10 Auto Pro Flex Rotary Evaporator SpecificationsType of coolingwithout condenserCooling surface1500 cm2Speed range5 - 300 rpmReversible direction of rotationyesSpeed tolerance set rotation speed < 100rpm1 ±rpmSpeed tolerance set rotation speed 100rpm1 ±%LiftMotorStroke140 mmHeating temperature rangeroom temp. - 180 °CHeat output1350 WSet temperature resolution1 ±KFilling volume max.4 lVacuum controller integratedyesTimeryesDimensions (W x H x D)500 x 430 x 440 mmWeight18.6 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20RS 232 interface yes USB interface yes Analog outputyesVoltage100 - 240 VFrequency50/60 HzPower input100 WPower input standby3.3 WComparison of ModelsSpecificationIKA RV 10 Auto Pro FlexIKA RV 10 Digital FlexIKA RV 3 FlexIKA RV 8 FlexType of CoolingWithout CondenserVerticalN/AVerticalCooling Surface1500 cm²0 cm²N/A1500 cm²Speed Range5 - 300 rpm5 - 280 rpm20 - 300 rpm5 - 300 rpmLiftMotorMotorManualManualStroke140 mm140 mm150 mm120 mmHeating Temperature RangeRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 99 °CRoom Temp. - 180 °CTimerYesYesN/AN/ADimensions (W x H x D)500 x 430 x 440 mm500 x 430 x 440 mm440 x 530 x 330 mm510 x 490 x 345 mmWeight18.6 kg18.5 kg12 kg22.366 kgRS 232 InterfaceYesYesN/AN/AUSB InterfaceYesYesN/AN/AVoltage100 - 240 V220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }Request a Formal Quote

This system was removed from a lab as it was no longer required. It was in full working order prior  (more)to removal from the lab. An engineer from Pacific Biosciences prepared the system for removal from the lab, including removing all the systems cladding, but unfortunately had to cut a few cables between the main unit and the environmental chamber. Whilst the blade server is included with the system, it has been wiped, so software may need reinstalling if you intend to use the system in full again. Strangely the information plate on the back of the unit just says 'PacBio RS' and not 'PacBio RS II' as would be expected, but the lab called it an RS II, and the cladding on the front says RS II, so we presume this is RS II. The engineer said that whilst getting the unit up and running again might be difficult, there is an enormous value of the system in parts. Apparently the camera part alone cost £125k. We have not removed any parts from the system whatsoever.

Ohaus 30400172 Modular Heat Block, 12 x 15 mL Conical Tubes The Ohaus 30400172 Modular Heat Block, 1 (more)2 x 15 mL Conical Tubes is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400172 Modular Heat Block, 12 x 15 mL Conical Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex 50mL BlockThe Scilogex Block has the capacity to accommodate 8 x 50mL tubes. Each hole has  (more)a diameter of 29mm and overall dimensions are 15 x 9.5 x 5cm. INCLUDED: The Scilogex 50mL Block includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Ministar 80 Control Overhead Stirrer Stirring Quantity Max 50 Liters Speed Range 0/30 - 500 rp (more)m Viscosity Max. 60000 mPas Features - "The Power Pack" in the high-tech mini class, reaching up to 500 RPM, ideal for special applications. - Hardened glass enclosed, fast response display for maximum visibility and chemical resistance. - Vibration sensors automatically stop the process upon deviations from permissible thresholds. - Integrated timer/counter for controlling kinetic-sensitive reactions and reminders. - Continuously adjustable speed between 0/30 - 500 rpm, with intuitive touch-sensitive surface. - USB interface for documenting parameters, installing firmware updates, with temperature reading and key lock function. The new MINISTAR series by IKA: Developed using the latest cutting-edge technology, this high-tech overhead stirrer with its compact design is ideal for special applications. Combining high performance with particular excellence, they require minimum space and come with a lifetime guarantee. See for yourself:“The Power Pack” in the high-tech mini class, small and as strong as an ox, reaches up to 500 RPM! - Hardened glass enclosed, fast response display for maximum visibility and chemical resistance - State-of-art vibration sensors detect deviations from permissible thresholds and automatically stop the process - Clear display for all essential information at a glance - Integrated timer / counter for the control of kinetic sensitive reactions and reminders - Viscosities up to 60,000 mPas and volumes of up to 50 l - Continuously adjustable speed between 0/30 – 500 rpm - USB interface, e.g. for documenting parameters using labworldsoft® or installing firmware updates - Intuitive and simple handling; touch-sensitive surface for long service life - Temperature reading on display - Chemical resistant housing - Key lock function - Microprocessor-controlled speed governor for constant rotational speed, even with changes in viscosity Click Here to View Product Video INCLUDED: The IKA Ministar 80 Control Overhead Stirrer includes: - MINISTAR 80 control - R 300 shaft protector - Fasten screws for R 300 (2x) - H 67.60 Temperature sensor, stainless steel - chuck key - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 8 Year Warranty Extension with IKA Registration) IKA Ministar 80 Control Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)50 lMotor rating input60 WMotor rating output46 WMotor principleBrushless DCSpeed displayLCDSpeed range0/30 - 500 rpmViscosity max.60000 mPasOutput max. at stirring shaft42 WPermissible ON time100 %Torque max. at stirring shaft80 NcmSpeed controlTurning knobSetting accuracy speed1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpm Stirring element fasteningchuck Connection for ext. temperature sensorPT1000 Temperature displayyesChuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmTorque displayyesSpeed controlelectronicNominal torque0.8 NmTorque measurementtrendDeviation of torque measurement I8 ±NcmTimeryesTimer displayLCDTime setting range0 - 6000 minTemperature measuring range-10 - 350 °CTemperature measurement resolution0.1 KAccuracy of temperature measurement±0.5 + tolerance PT1000 (DIN EN 60751 Class A) KLimit deviation temperature sensor≤ ± (0.15 + 0.002xITI) KHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)70 x 193 x 154 mmWeight1.72 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input69 WDC Voltage24 VCurrent consumption2900 mAComparison of ModelsSpecificationsMinistar 20 ControlMinistar 20 DigitalMinistar 40 ControlMinistar 40 DigitalMinistar 80 ControlMinistar 80 DigitalStirring Quantity Max. (H2O)15 l15 l25 l25 l50 l50 lMotor Rating Input60 W60 W60 W60 W60 W60 WSpeed DisplayLCDLEDLCDLEDLCDLEDSpeed Range0/50 - 2000 rpm0/50 - 2000 rpm0/30 - 1000 rpm0/50 - 1000 rpm0/30 - 500 rpm0/50 - 500 rpmViscosity Max.10000 mPas10000 mPas30000 mPas30000 mPas60000 mPas60000 mPasTimer DisplayLCDNoneLCDNoneLCDNoneTemperature DisplayYesNoYesNoYesNoDimensions (W x H x D)70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mmUSB InterfaceYesYesYesYesYesYesVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(6) { background-color: #fffacd; } Request a Formal Quote