VWR / KNF VP 820 diaphragm vacuum pump PM20404.820.3

GILSON MiniPuls 2 Peristaltic Pump 1 channel only Voltage: 220-240V, 50/60Hz Standard flow rate: 0.3 (more) µL/min – 30 mL/min at maximum pressure 0.5 MPa Continuous flow Forward and reverse movement.

PFEIFFER Turbomolecular Vacuum Pump TMH 262-005 with TC100 Controller This was removed from a unive (more)rsity lab where it was surplus to requirements. Included are; PFEIFFER Turbomolecular Vacuum Pump:Model TMH 262-005DN 100 ISO -K, 3P The unit is in good cosmetic condition. The fan blade appears to move freely but it has not been powered up. PFEIFFER Controller:Model TC100Mod no. PM C01 692A The unit is in good cosmetic condition

VACUUBRAND MZ 2 NT Diaphragm Pump Ultimate Vacuum 7 mbar / 5.2 torr Maximum Pumping Speed 1.4 cfm at (more) 60Hz Number of Heads/Stages 2/2 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Whisper quiet - Very low vibration - Xxceptionally long diaphragm life and maintenance-free drive system for low lifetime costs Diaphragm pumps are an excellent solution for continuous, oil-free evacuation and pumping of gases. All parts in contact with pumped media are made of aluminum and selected plastics and allow a wide range of applications for non corrosive gases. The two-stage construction provides the advantageous combination of high pumping speed and an ultimate vacuum down to 7 mbar. The highly flexible fabric-reinforced double diaphragm made of FKM is ideal for extended operating life. The new NT-series features further improved performance data. Two-stage diaphragm pumps are an excellent choice for continuous, oil-free pumping at medium vacuum requirements. In contrast to water jet pumps they do not consume water and therefore do not produce any contaminated waste water. Typical applications are vacuum ovens and aqueous filtrations. INCLUDED: The VACUUBRAND MV 2 VARIO Select Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND MD 12 NT Diaphragm Pump Ultimate Vacuum 2 mbar (1.5 Torr) Maximum Pumping Speed 7.1 CFM  (more)at 60Hz Number of Heads/Stages 8/3 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Whisper quiet - Reduced process times - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs The MD 12 NT diaphragm pump is an especially powerful pump for oil-free evacuation and pumping of non-aggressive gases. The three-stage design of this eight-cylinder pump provides the advantageous combination of very high pumping speed and excellent ultimate vacuum. The flow path consists of aluminum, stainless steel and carefully selected plastics to permit a wide range of applications. The fabric-reinforced double diaphragms are made of highly flexible FKM for extended operating life and high vacuum performance. Eight-cylinder NT pumps feature quiet operation, with smooth and easy-to-clean surfaces. Like all VACUUBRAND diaphragm pumps they operate absolutely oil-free and do not have any sliding components in the gas path. In normal operation they are completely free of abrasion. This eliminates most of the particulate impurities frequently generated inside of scroll or piston pumps. The MD 12 NT is an excellent choice for continuous, oil-free evacuation and pumping of non-aggressive gases, especially for applications in physics and analytics. Due to the very good ultimate vacuum the MD 12 NT is often used as an alternative to rotary vane pumps, for example for vacuum ovens, for very quick and efficient degassing of viscous media, exhaust gas analytics and especially as backing pump for large turbomolecular drag pumps. The particularly high pumping speed enables the usage of bigger vacuum apparatus and with high gas throughput. The pump is extraordinarily silent and exhibits very low vibration making it an excellent choice for sensitive equipment such as electron microscopes. Back diffusion of oil or even oil back flow, e.g., into a high vacuum chamber is excluded due to its oil-free operation. INCLUDED: The VACUUBRAND MD 12 NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Gilson MINIPULS 3 Pump (Drive Unit) w/ Selectable Standard Flow Peristaltic Pump HeadFeatures - Util (more)izes positive displacement pump technology that allows liquid to flow nearly pulse free as a result of ten stainless steel rollers - Produces smooth flows with excellent accuracy and precision, even at high flow rates - Interchangable heads allow for an array of possible applications - Easy to operate, install, and maintain due to simplistic functionality - All control buttons are readily accessible and intuitive to use - Small lab footprint and with a weight of only 5.5 pounds the Minipuls 3 is exceptionally portable. - Has a maximum flow range of 30 mL/min for standard models and 220 mL/min for high flow models - Remote start and stop possible The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.Pulse-free Liquid TransferUtilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.Flow Rates to Meet Your NeedsWith a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications. • Four standard models (1, 2, 4, or 8 channels): 0.3 μL/min to 30 mL/min • Two high flow models (2 or 4 channels): 1 mL/min to 220 mL/minEasy to OperateMINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible.INCLUDED: The Gilson MINIPULS 3 Pump (Drive Unit) w/ Selectable Standard Flow Peristaltic Pump Head includes: - Selected Standard Flow Peristaltic Pump Head - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

nEXT Pumps Ultimate Vacuum <3.5x10-9 mbar Inlet Connection DN 160 ISO-K Pumping Speed Nominal 4,3 (more)79.99 l/min Features - Delivers fast nitrogen pumping speeds, making it suitable for demanding applications - Designed for R&D, coating, heat treatment, furnace applications, and more - Offers variants for specific needs, including standard, high light gas compression, and regenerative stages - Compatible with TAG and TIC controllers for easy system integration - Allows for field replacement of oil cartridges and bearings with minimal tools - Provides powerful performance in a space-efficient design - Operates efficiently in any orientation, offering versatility in installation - Magnetic bearings reduce vibration, ensuring a stable vacuum environment - Optimized for high-speed and high-compression applications Edwards nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers. With the nEXT730 turbomolecular pumps Edwards provides a larger pump offering nitrogen pumping speeds of 730 l/s. INCLUDED: The Edwards nEXT730D - ISO-K160 BP NW25 Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

Cooling recirculator model ULK 1002 FRYKA The universal chiller for laboratory and industry, charact (more)erized by its flexibility in various applications. A great economical alternative to running water cooling systems. The 9.5-liter tank allows for wide-ranging methods of use: when full, it ensures high temperature stability over time and, at a minimum, a rapid cooling system for the most immediate needs. The new modern space-saving design, low weight, innovative technical features with low-noise cooling unit, also make it suitable for direct use at the workplace. Energy efficient: - fan with EC technology Low noise level: - particularly quiet components - the fan adjusts its speed to the required value Easy to use: - integrated funnel - self-sealing hose connector with quick coupling - drain cock High quality components: - touchscreen controller with high quality glass screen and integrated digital flow and fill level indicators - components from renowned German manufacturers - refrigeration unit: completely hermetically sealed, air cooled, low maintenance High operational reliability: - thermal overload protection - dry-running protection - optical and acoustic alarm - error messages are displayed in plain text Proven standard: - MOD bus interface Technical features: Operation from -10°C to +40°C Control accuracy +/- 0.5K Cooling capacity in watts at + 20°C 1200W; at + 10°C 850W; at -10°C 400W Circulation pump: flow rate 12 l / min Flow pressure: 2.9 bar External dimensions [LxWxH]: 35 x 44.5 x 66 cm Weight: 41 kg Ambient temperature from +12°C to +30°C Electrical connection: 230 V / 50 Hz Max current: 3.5 A Coolant tank from 2.5 to 9.5 l Fitting for 12 mm hose

This Thermo Finnigan Trace GC System was removed from a university laboratory where it was surplus t (more)o requirements. All the units are in good, used cosmetic condition, and all power up. We were unable to test them further than this, however. The system comes supplied without a detector. The ECD one that was inside has been retained by the lab. The system consists of: 1 x Finnigan Trace GC Ultra With TriPlus AS Autosampler.1 x Thermo TP100 Sampler Supply It also comes with some spares and cables.

This Narishige PC-10 Dual Stage Glass Micropipette Puller was removed from a university lab where it (more) was surplus to requirements. The unit powers up and the coil visibly heats. It was not tested further. It is in good cosmetic condition but has some marks from use.

Memmert IPP2200eco Peltier-Cooled Forced Circulation Incubator 2140L, 115V Temperature Range 0°C (a (more)t least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1360L (48.0 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP2200eco Peltier-Cooled Forced Circulation Incubator 2140L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP2200eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP2200eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP2200eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP2200eco Peltier-Cooled Forced Circulation Incubator 2140L, 115V includes: - 6 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7” TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software "LABEL EDITOR", and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.