Vacuubrand RZ6 Rotary Vane Vacuum Pump Drehschieber Vakuumpumpe 5.7m3/h 2x10-3 mbar

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The N 820.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automatic conde (more)nsate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products.  The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications.  When the humid gases are sucked in, condensation may form in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow rate (max.) 20 l / min Final vacuum (max.) 10 mbar (abs.) Pressure (max.) 1 bar (rel.) Fluid temperature allowed at 5-40°C FFPM valve material PTFE coated diaphragm material Pump head material PTFE Applications Rotary evaporation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

VACUUBRAND PC 610 Select Chemistry Pumping Unit Ultimate Vacuum 1.5 mbar (1.1 Torr) Maximum Pumping (more) Speed 2.2 CFM at 60Hz Number of Heads/Stages 4/3 Features - VACUU·SELECT vacuum controller with graphical user interface simplifies work in the laboratory - Predefined applications save time and give reproducible results - Easy-to-use application editor allows own process sequences - Meets high vacuum requirements for most high boiling solvents - Excellent environmental friendliness due to efficient solvent recovery Our PC 600-series chemistry pumping units of this series are an excellent choice for supporting electronically controlled evaporation or drying processes with even many high boiling point solvents. Our popular MD 4C NT three-stage chemistry diaphragm pump, with its 2 mbar ultimate vacuum rating, is the heart of these pumping units. Typical applications include lab applications such as rotary evaporation, vacuum drying ovens, and vacuum distillation. The integrated VACUU·SELECT controller provides an easy-to-use, application based interface that covers all common lab applications. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, it constantly monitors the pressure and switches to 2 point control mode to hold the pressure stable when a boiling point is detected. The controller also allows for easy manual vacuum control for simple processes. The inlet separator, made of glass with protective coating, prevents particles and liquid droplets from entering the pump. The exhaust vapor condenser provides nearly 100% recovery of solvents for economical recycling and environmental protection.INCLUDED: The VACUUBRAND PC 610 Select Chemistry Pumping Unit includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF UN842.3FT.40P IP44-T Diaphragm Pump Ultimate Vacuum 4 mbar (abs.) Maximum Flow Rate 34L/min (2. (more)04 m3/h) Protection Class IP44 Features - Pure transfer, evacuation and compression - Highly compatible with vapors and condensation - Chemically resistant flowpath - Suitable for highly aggressive or corrosive gases and vapors - Environmentally friendly - Maintenance-free The KNF UN842.3FT.40P IP44-T Diaphragm Pump features an integrated KNF self-drying system. Designed for a wide range of applications in laboratories, including vacuum drying of chambers (for drying or heat-treating substances and components) or steam sterilizers for sterilizing instruments, vessels, filters and textiles. The KNF UN842.3FT.40P IP44-T Diaphragm Pump can be used very universally due to its high resistance to aggressive media. The KNF self-drying system allows condensed liquid to be blown out of the pump heads at a high speed during evacuation. The drying cycle can be adjusted to the requirements of the individual process using three variables. The KNF UN842.3FT.40P IP44-T Diaphragm Pump is chemical-resistant, therefore suitable for highly aggressive or corrosive gasses and vapors. This pump is 115V. The KNF UN842.3FT.40P IP44-T Diaphragm Pump is brand new in box .INCLUDED: The KNF UN842.3FT.40P IP44-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards XDS35iE Enhanced Dry Scroll Pump Ultimate Vacuum 0.03 mbar (0.02 Torr) Peak Pumping Speed 3 (more)5 CFM (21 m3/h-1) Inlet Connection DN 40 ISO-KF (NW40) Features - Proven dry, clean vacuum solutions for a broad range of applications - Features smart drive technology for optimal global performance - Enhanced with double start scroll form technology and by-pass valves - Reduced peak power requirements at roughing pressures for efficient operation - Continuous higher roughing speeds to handle special application needs - High flow gas ballast feature allows pumping of vapours, including water vapour up to 240 gh-1 - Simple single-sided scroll design facilitates quick and easy maintenance - Offers up to 25% increased pumping speed at roughing pressures for frequent cycling - Equipped with DN 40 ISO-KF (NW40) inlet and DN 25 ISO-KF (NW25) outlet for effective connectivity The Edwards XDS35iE Enhanced Dry Scroll Pump represents a cutting-edge solution in dry, clean vacuum technology, suitable for a wide array of applications. This pump is equipped with double start scroll form technology and by-pass valves, enhancing the original XDS35i family by increasing the roughing performance and capacity for large volume evacuations. The pump's smart motor drive ensures consistent global performance, includes overload protection, and facilitates remote start/stop operations. A key feature is the high flow gas ballast, allowing the handling of water vapour and other vapours up to 240 gh-1. Maintenance is streamlined thanks to its simple single-sided scroll design, ensuring low ownership costs and maximum uptime. Additionally, the pump features reduced peak power requirements by up to 20% during initial pump down and provides up to 25% more pumping speed at roughing pressures, ideal for high frequency cycling applications. The pump achieves an ultimate vacuum of 0.03 mbar (0.02 Torr), which slightly increases with gas ballast usage, and offers a peak pumping speed of 35 CFM. It is designed with a DN 40 ISO-KF (NW40) inlet and a DN 25 ISO-KF (NW25) outlet, ensuring efficient connectivity and robust performance. Click Here to View Product Video INCLUDED: The Edwards XDS35iE Enhanced Dry Scroll Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards XDS35iC Dry Scroll Pump Ultimate Vacuum 1 x 10-2 mbar Inlet Connection NW40 Displacement 43  (more)m3h-1 / 25 ft3min-1 Features - High ultimate vacuum and rapid pumping speed ensure efficient operation across a wide range of laboratory and industrial applications - Quiet operation provides a comfortable working environment, reducing noise in sensitive areas - Features a pressurized oil system that lubricates pump shaft bearings and rotor sealing faces for reliable performance - Maintenance is simplified with an oil sight-glass for easy monitoring of oil levels and conditions at a glance - Facilitates easy oil changes with an oil drain plug that allows either gravity or pressure oil drainage for convenience - Compact, freestanding design allows flexible use without the need for additional support structures - Ideal for use with analytical instruments, leak detectors, helium research, and for backing turbomolecular pumps, showcasing its versatility Scroll pumps are an excellent alternative to rotary vane pumps where oil free pumping is desirable. The XDS pumps in particular use an innovative bearing shield to isolate the vacuum environment from all forms of lubricant not only making them totally dry, but also protecting the bearing from any process gases. Vapour handling is enabled by an adjustable gas ballast; this allows the range of pumps to satisfy many applications that were previously off limits to other scroll pumps. The Edwards XDS35iC features Chemraz internal valves and stainlesssteel fittings for extra protection from the pumped media. The ‘C’ series isbetter designed for more aggressive applications as opposed to the standardseries. Click Here to View Product Video INCLUDED: The Edwards XDS35iC Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards XDS35iC Dry Scroll Pump Technical SpecificationsDisplacement 50 or 60Hz43 m3h-1 / 25 ft3min-1Peak pumping speed 50 or 60Hz35 m3h-1 / 21 ft3min-1Ultimate vacuum (Total pressure)1 x 10-2 mbar / 8 x 10-3 TorrMax inlet pressure for water vapour35 mbar / 23 TorrMax water vapour pumping rate – GB I70 gh-1Max water vapour pumping rate – GB II240 gh-1Max allowed outlet pressure0.2 bar gauge / 2.9 psig*Max allowed inlet and GB pressure0.5 bar gauge / 7 psigMotor power0.52kWPower connectorIEC EN60320 C19Nominal rotation speed1750 rpmWeight48 kg / 105 lbInlet flangeNW40Exhaust flangeNW25Noise level57 dB (A)Vibration<4.5mms -1 (rms)Leak tightness (static)<1 x 10-6 mbar ls-1Operating temperature range10 to 40 °C / 50 to 104 °FElectrical Requirements115/230V

This Corning Dispersion Compensator Module Model No. DCM-C-040-SP was removed from a university lab  (more)where it was surplus to requirements. The unit is in good cosmetic condition. There are surface scratches from general use. No PSU was supplied so we were unable to power it up. Model No. DCM-C-040-SPDispersion: 685ps/nmAttenuation: 4.74dB With it were 2x Optical cables

Cecil Model CE 7200 Spectrometer Lab This item was removed from a university lab where it was surplu (more)s to requirement. It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility. Specifications; - Model: CE 7200 - Software Version: R0058

Fisher Scientific DMU12 12L WaterBath Lab This item was removed from a university where it was surpl (more)us to requirement. The unit powers up and is in good working order (thermometer not included). No lid included.

Labconco CentriVap DNA RotorForuse with Labconco CentriVap Systems INCLUDED: The Labconco 7462900  (more)CentriVap DNA Rotor includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Crest Ultrasonics Mesh Basket for P2600 Ultrasonic Cleaner The Crest Ultrasonics Mesh Basket for P26 (more)00 Ultrasonic Cleaner features a mesh size of 8 x 8mm and a wire thickness of1mm making this ideal for use inultrasonic cleaning.All baskets are equipped with drain handles, helping toprevent unnecessary carryover of the cleaning agent andkeeps your workplace clean. The Crest Ultrasonics Mesh Basket for P2600 Ultrasonic Cleaner is 19" in length x 10.75" in width x 7" in depth and is for use with the P2600 Ultrasonic Cleaners. The Crest Ultrasonics Mesh Basket for P2600 Ultrasonic Cleaner is brand new in box . Includes a Full 1 Year Parts and Labor Warranty.