Scilogex STORM5000 Chemical Resistant Diaphragm Vacuum Pump

Edwards Diffstack 100 Diffusion Pump with Backing Roughing Valve Model - BRV 25 This was removed fro (more)m a university lab where it was surplus to requirements. The unit has not been tested.

Varian Turbo-V 250 Macro Torr Pump System This system was removed from a university where it was sur (more)plus to requirement. All elements are in good cosmetic condition and the blades move freely on the Varian Turbo-V 250 Macro Torr Pump. We are unable to test further at our facility. All items included in the system: 1 x Varian Turbo-V 250 Macro Torr Pump:Model no. 9699008S016 1 x Multigauge controllerPart no. V209600 1 x Varian Turbo-V250 C.U Pump controller:Model no. 9699425S004 1 x Multigauge RS232 Board instruction manualPart no. L6439309 1 x Turbo-V 250 Controllers Instruction manualModel 969-9423Model 969-9523Model 969-9425 1 x Turbo- V 250 Pumps Instructional manual969-9007 Series969-9008 Series All cables shown in the images are included.

Gilson MiniPuls 3 peristaltic pump Technical characteristics Voltage: 220-240V, 50/60Hz Power: 45VA  (more)Speed: 0-48 revolutions 8 channels Standard flow rate: 0.3 µL/min – 30 mL/min at maximum pressure 0.5 MPa Pump head speed: adjustable 0 to 48 rpm with increments 0.01 rpm to 9.99 rpm and increments 0.1 rpm to 10 rpm Standard model pipe diameter: 0.25–4 mm (ID) External dimensions (L) x (D) x (H): 15 x 17.5 x 29.5 cm

Hoefer GD2000 Vacuum Gel Drying System w/ Vacuum Pump Max. Gel Dimensions (W x L) 33 x 44 cm Heater (more) Output Power 800 W Ultimate Pressure VP200 Vacuum Pump 9 mbar Features - Rapid and even gel drying with a dry-heat vacuum method - Thermostatically controlled 800W heater for consistent operation - Independent 575W pump outlet for efficient vacuum performance - Complete system includes GD2000 Gel Dryer, VP200 Vacuum Pump, and all essential accessories - Indoor operating conditions: 15-40°C with humidity up to 80% for 15-31°C, reducing to 50% at 31-40°C - Stainless steel screen and porous polyethylene cover sheet for effective gel drying - Complies with EN61010-1, UL61010A-1, CSA22.2 1010.1, and CE safety certifications The Hoefer GD2000 Vacuum Gel Drying System w/ Vacuum Pump provides a fast, efficient, and safe solution for drying gels through a dry-heat vacuum method. This system ensures rapid and even drying with minimal risk of gel distortion or cracking. Equipped with a powerful, thermostatically controlled 800W heater, the GD2000 maintains consistent temperature levels to achieve high-quality results. The complete system includes the VP200 Vacuum Pump, stainless steel screen, porous polyethylene cover sheet, Mylar® and cellophane sheets, and other essential accessories for effective and reliable operation. Designed for indoor use within a 15-40°C temperature range, the GD2000 is compatible with high humidity environments up to 80% (gradually decreasing to 50% at 31-40°C). Built with safety in mind, this system meets EN61010-1, UL61010A-1, CSA22.2 1010.1, and CE safety standards, making it a durable and compliant choice for precise gel drying needs. INCLUDED: The Hoefer GD2000 Vacuum Gel Drying System w/ Vacuum Pump includes: - Silicone Rubber Overlay Sheet - VP200 Vacuum Pump - Stainless Steel Screen - Porous Polyethylene Cover Sheet - Vacuum Tubing–3 m - Porous Cellophane–50 sheets - Mylar® Cover Sheet - Filter Paper–10 sheets - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Pfeiffer HiCube 80 Neo, 40 KF, MVP 030-3 Turbo Pumping Station Final Pressure 1 x 10-7 hPa / 7.5 x  (more)10-8 Torr / 1 x 10-7 mbar Backing Pump Speed 1.8 m³/h / 1.06 cfm / 30 l/min Pumping Speed for N2 35 l/s Features - Compact series of pumping stations for all high vacuum applications - Simple operation with 7in. touch display - Remote control via web server available - Compatible with a wide variety of applications - Reliable and robust The Pfeiffer HiCube 80 Neo, 40 KF, MVP 030-3 Turbo Pumping Station is a compact and reliable solution for high vacuum applications. With a final pressure of 1 x 10⁻⁷ mbar and a pumping speed of 35 l/s for nitrogen, it delivers efficient vacuum generation. The MVP 030-3 diaphragm backing pump operates at 1.8 m³/h, with air-cooled forced convection ensuring optimal performance. Its quiet operation, with an emission sound pressure level of ≤50 dB(A), and global compatibility make it suitable for a wide range of environments. Designed for ease of use, the HiCube 80 Neo features a 7-inch touch display and offers remote control via a web server. It’s equipped with a HiPace 80 Neo turbopump and supports flexible operation through its DN 40 ISO-KF connection flange. With a robust design and versatile input voltage range (100-240 V AC), this pumping station is ideal for demanding laboratory or industrial settings, ensuring reliability across a variety of applications. INCLUDED: The Pfeiffer HiCube 80 Neo, 40 KF, MVP 030-3 Turbo Pumping Station includes: - Backing Pump - Pfeiffer MVP 030-3 Diaphragm Pump - Protective Cap for High Vacuum Flange - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards nXDS10i Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases an (more)d bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. Click Here to View Product Video INCLUDED: The Edwards nXDS10i Dry Scroll Pump includes: - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

Bruker BMU 4.0 Monitoring Unit This item was removed from a university where it was surplus to requ (more)irement. It is in good cosmetic condition and powered up, we are unable to test it further at our facility.

Limpsfield LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System This item was removed fro (more)m a university where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LCNP15Serial No. 01160Manufactured 30.05.14Output 1303Kw/hr With Autoflame Combustion Management SystemPart Nos. 2 x MM10005, Serial Nos. 12294, 12331 Siemens Ignition Transformer Type ZE 23/8.5 Dungs LGW 50 A4 pressure switch WEG W22 7.5hp 415 volt fan motor Caldaia A Condensazione high limit cut-off control 2.0" gas inlet pipe

Demo item. 12 months warranty.

MARSHALL Select MS-BS120 Electronic Balance, 120g, 0.001g Capacity 120g Readability 0.001g Repeatab (more)ility 0.001g Features - New-generation electromagnetic balance sensor ensures high precision - Stabilization time of only 1 second for efficient measurements - Ultra-large LCD display for clear and comfortable viewing - Novel design with a five-sided full-transparent windshield for enhanced visibility and protection - Built-in lower weighing hook for convenient use and versatility - Features include automatic fault detection, four-point linear calibration, and overload protection - Supports multiple functions like auto-counting, unit conversion, stability indication, and zero-memory - Equipped with RS-232 interface for direct connection to computers and printers The MARSHALL Select MS-BS120 Electronic Balance is designed for precision weighing, offering a maximum capacity of 120g and a readability of 0.001g. Its performance is enhanced by a new-generation electromagnetic balance weighing sensor, ensuring high accuracy and repeatability with a standard deviation of just 0.001g. This balance features a pan size of 3.1 in. (80 mm) in diameter and boasts a rapid stabilization time of just 1 second, making it ideal for fast-paced laboratory environments. The MS-BS120 is equipped with an ultra-large LCD display, providing a clear and comfortable viewing experience for users. Its humanized design includes a novel, five-sided, full-transparent windshield that protects the weighing area while maintaining visibility. The balance also includes a built-in lower weighing hook for added convenience in handling various weighing tasks. Functionality is at the forefront with the MS-BS120, which offers multiple features to enhance usability and reliability. These include automatic fault detection, four-point linear calibration, and overload protection. Additional functions like auto-counting, unit conversion (including metric carat and gold ounce), stability indication, full-scale taring, and zero-memory improve operational efficiency and versatility. The balance also features a built-in RS-232 interface, enabling direct connections to external devices such as computers and printers for seamless data integration and reporting. This electronic balance is an excellent choice for professionals seeking precise and reliable measurement in research, industrial, and educational settings. INCLUDED: The MARSHALL Select MS-BS120 Electronic Balance, 120g, 0.001g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert IN110 Natural Convection Incubator 108L, 115V Temperature Range At least 5°C above ambient  (more)to +80°C Convection Type Natural Convection Chamber Volume 108 L Features - 108 L (3.8 cu.ft.) capacity for ample sample accommodation - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - High-resolution display with 0.1°C accuracy for both set point and actual temperature values - Adjustable parameters including temperature (Celsius/Fahrenheit), air flap position, program time, and daylight savings - SetpointWAIT function ensures process time begins only once the set temperature is reached - AtmoCONTROL software allows for data management and program organization via Ethernet - Inner glass door allows for easy sample monitoring without disrupting the internal environment - Autodiagnostic system and adjustable overtemperature monitor for enhanced safety The Memmert IN110 Natural Convection Incubator 108L, 115V is designed for precise and reliable sample incubation in low-temperature applications. With a spacious 108 L (3.8 cu.ft.) capacity, this unit accommodates a wide range of samples and ensures consistent temperature control from at least 5°C above ambient up to +80°C. The high-resolution display provides 0.1°C accuracy for both set points and actual values, allowing precise adjustments. Its adjustable parameters include temperature in Celsius or Fahrenheit, air flap position, and program timing, with a SetpointWAIT function that begins processing only once the set temperature is reached. Enhanced with AtmoCONTROL software for data management, a durable stainless steel interior, and an autodiagnostic system with overtemperature monitoring, this incubator combines efficiency, safety, and ease of use. INCLUDED: The Memmert IN110 Natural Convection Incubator 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Average inflow airflow: 0.45 m/s Average downflow airflow: 0.30 m/s Inflow airflow volume: 524 m³/h  (more)Downflow (70%) airflow volume: 1258 m³/h Exhaust (30%) airflow volume: 524 m³/h Internal dimensions (WxDxH): 1870 x 623 x 670 mm Useable work area: 0.9 m² Dimensions (WxDxH): 2030 x 815 x 1540 mm Base stand height (min/max): 711/864 mm Sound emission: < 61 dBA Fluorescent lamp intensity: > 1150 Lux Weight: 350 kg