MARSHALL Select MS-VP200 Chemical Protected Diaphragm Vacuum Pump, 200 mbar

Portable suction system, vacuum pump ROCKER BIOVAC 240 New equipment (never used) Max. vacuum : 720  (more)mmHg Max. flow rate : 38 l//min Hose barb : 3/16 inch Pump type: Piston Dimension (LxWxH) : 53x24x35cm Suction bottle：PC (3000ml)

This was removed from a university lab where it was surplus plus to requirements. All units power up (more) but have not been tested further. It is in reasonably good cosmetic condition with minor marks from use. Included are; -Dolomite Mitos P-Pump-Dolomite Mitos Sensor Interface-Dolomite Mitos Flow Rate Sensor P-Pump model number- 3200176_5P-Pump serial number- 4901379 Sensor serial number- 1600878

This Agilent Technologies HPLC 1200 Series G1311A Quat Pump Quaternary was removed from a university (more) lab where it was surplus to requirements. The item is in good cosmetic condition and powered up, as seen the item is missing the front door panel. We are unable to test this item further at our facility.

KNF UN816.1.2KT.45P IP20-T Diaphragm Pump Ultimate Vacuum 160 mbar (abs.) Maximum Flow Rate 30L/min (more) (1.8 m3/h) Protection Class IP20 Features - Clean, 100% oil-free operation - Corrosion-resistant - Vacuum gauge and regulator for simple, convenient control - Compact, quiet and reliable - Can handle wet vapors without damage - Maintenance-free TheKNF UN816.1.2KT.45P IP20-T Diaphragm Pump is a single-head, dry-running device used in a wide range oflaboratory applications. They transfer, compress and pump down withoutcontamination. The heart of these very compact pumps is a KNF structureddiaphragm. This patented diaphragm was stress-optimized using the FiniteElements method. As a result, KNF was able to make the pump smaller whileincreasing the service life of the diaphragm. This pump is 115V. INCLUDED: The KNF UN816.1.2KT.45P IP20-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF LIQUIPORT IP65 NF 100 FT.18S Diaphragm Liquid Transfer Pump Flow Rate 0.2 to 1.3 l/min Suction  (more)Height (max.) 3 mWg Pressure (max.) 1 bar (rel.) Features - Small footprint - Simple, intuitive operation - Manual control - Self-priming, can run dry - Splashproof with IP65 rating - Available with different material configurations for chemical resistance - Maintenance-free - Available pump head materials: PP, PVDF, PTFE - Diaphragm material: PTFE-coated - Valve material: FFKM-Simriz Chemically resistant liquid transfer diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Manual control of flow rate with LED indicator. INCLUDED: The KNF LIQUIPORT IP65 NF 100 FT.18S Diaphragm Liquid Transfer Pump includes: - Barbed Fittings for Tubing ID 8mm - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Hei-FLOW Expert 600 Peristaltic Pump This model has a flow rate of 2.0 — 4,056 ml/min and i (more)s designed for operation with single-channel pump heads. The analog interface makes it possible that all functions can be controlled externally. A control accuracy of ±3.5% and a conveyor speed of 24 to 600 rpm provide optimum process conditions. In addition, sensitive media can be protected from influence by using the optional foot switch. Like all Heidolph peristaltic pumps, the conveying direction of this model can be changed by a simple push of a button. Furthermore, the accelerated filling and emptying of the tubing is simplified, since here only the button for the maximum speed has to be pressed. Click Here to View Product Video INCLUDED: The Heidolph Hei-FLOW Expert 600 Peristaltic Pump includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

This listing is for a Shell Lab S16R-HS-2 Shaking Incubator.The unit is in full working condition an (more)d is ready for immediate release.Supplied with CO2 Bottles and Trolley.The Shell Lab S16R-HS-2 Shaking Incubator is expertly crafted for the continuous growth of biological organisms, making it ideal for various research applications. Here’s a rundown of its standout features:Key Features:Generous Capacity: With a 92-liter capacity, the S16R-HS-2 is well-suited for accommodating larger experimental setups, perfect for microbiology and cell culture studies.Standard Voltage Compatibility: Operating on 110/120 volts allows easy integration into most lab environments without the need for special electrical installations.Adjustable Orbit: The incubator offers an adjustable orbit, providing the flexibility to switch between a vigorous 0.5-inch stroke for enhanced mixing and a gentle 1-inch stroke for delicate cultures. This versatility supports various cell types and their specific oxygenation needs.Counter Balance Weighting System: This unique feature ensures smoother operation by adjusting to off-center loads, varying capacities, and stroke lengths, reducing vibration and enhancing stability—especially important for delicate cultures.Precise Temperature Control: Essential for biological growth, the incubator maintains stable temperatures, which can be critical for experiments requiring strict environmental conditions.Compact Footprint: Its small footprint makes it an excellent choice for labs with limited space, allowing for efficient use of available work areas.Static Incubation Capability: Includes shelf space to accommodate static incubation while shaking, providing additional flexibility for experimental setups.Comprehensive Alarm System: Equipped with alarms for temperature, RPM, and timing, users are promptly notified of any deviations, ensuring that conditions remain optimal for growth.Overtemperature Protection: This feature includes a safety thermostat, providing an extra layer of protection to prevent overheating and ensuring reliability during long-term experiments.

Manufacturer: Hiden Isochema Model: IGAsorp Dynamic Vapor Sorption Analyzer S/N: IG-SA-069 Descripti (more)on: IGAsorp Dynamic Vapor Sorption Analyzer is a fully automated compact benchtop DVS analyzer, for fast and accurate sorption measurements using the dynamic flow technique for water and organic solvents. Measured vapor uptake isotherms and kinetics are used to characterize, test and evaluate materials in precisely defined environmental conditions. An ultra-sensitive microbalance measures changes in sample mass as a function of humidity and temperature. Humidity is determined by relative mixing of wet and dry gas streams, and is measured and regulated at the sample position. These factors combine to offer unrivalled performance and total baseline stability. The IGAsorp uses the unique IGA method for the determination of the sorption kinetics and equilibrium isotherms. This ensures accurate and consistent analysis with faster analysis times making the optimum use of instrument time. Hiden Isochema’s unique IGA method is applied independently to every step in a gravimetric sorption measurement. At each step, the humidity and temperature are actively regulated, with resultant changes in sample weight continuously recorded. The kinetic weight data is analyzed in real-time, and the trend toward equilibrium is predicted and displayed on screen. Equilibration criteria are applied to objectively determine the period allowed before the measurement moves on to the next pressure or temperature value. Each equilibrium point is plotted on an isotherm or isohume, and the full raw data is also recorded. The IGAsorp therefore allows consistent analysis with optimum measurement accuracy and faster overall process times. Benefits and features: - Unrivalled performance and total baseline stability- Fast and accurate analysis of equilibria and kinetics using the IGA method- Market-leading weight stability, temperature and humidity control- Unrivalled measurement precision, accuracy and resolution- Operation with water and organic vapors- Built-in user conformance tests for weight, temperature and humidity verification- High security 21 CFR Part 11 compliant software option with 3 user privilege levels- Advanced analysis features including diffusion coefficients, permeation rates and more Types of measurements that can be recorded: - Isotherm and kinetics analysis- Cyclic/lifetime studies- Moisture content determination- Hydrate analysis- Permeation and diffusion studies (MVTR)- Amorphous phase detection Types of materials that can be tested: - Polymers- Textiles- Pharmaceuticals- Porous materials- Packaging materials- Building and construction materials- Food products and other consumables- Wood, fibres, clays and other natural materials Key areas: - Pharmaceutical- Biotech- Polymers and packaging- Natural materials- Building and construction materials (cement, timber, insulation, adhesives)- Electronics- Fuel cells (proton exchange membranes) DVS applications: - Quality control- Hydrophobicity, product stability and shelf life- Water activity and water content determination- Polymorphism: amorphous phase detection and quantification- Diffusion and permeation including vapor transmission rate (MVTR/WVTR) analysis Application data: - Amorphous phase detection:A simple test to detect amorphous phase transition- Permeation study:MVTR results from a polmer film- Kinetics analysis:Example of an isothermal kinetic response data- Isotherm analysis:Comparison between isotherms at course and medium resolution- Hydrate analysis:Example of a hydration-dehydration cycle- Diffusion study:Variation of the microscopic diffusion coefficient with relative humidity Specifications: Weight:- Capacity: 5 gram- Weighing range: 25 / 200 / 1000 mg (fixed) or user selectable (optional)- Resolution: from 0.05 microgram- Stability: nominal +/- 1 microgram / weekHumidity:- Control range: 0 to 98 %RH- Absolute Calibration Accuracy: +/-1 % (0-90 %); +/-2 % (90-100 %)- Regulation accuracy: +/- 0.01 %RH- Minimum control increment: 0.02 %RH- Gas Supply: Dry air, N2 or He- Maximum flow rate: 500 ml/minTemperature:- Measurement range: 5 – 50 °C- Regulation accuracy: +/- 0.01 °CPower requirements: 240V 50Hz Items delivered: - Hiden Isochema IGAsorp Dynamic Vapor Sorption Analyzer- Connecting Cable Condition: The item is in very good condition - cosmetic, technical and working. It operates as intended and functions properly being 100% functional tested. The Hiden Isochema IGAsorp Dynamic Vapor Sorption Analyzer is ready to use!

Maximum RCF with fixed angle rotor: 20913 x g Maximum RCF with swing-bucket rotor: 4500 x g Maximum  (more)RCF with plate rotor: 3486 x g Speed range: 200 – 14000 rpm Temperature range: -9 °C to 40 °C Maximum capacity: 4x 750 mL/4x MTP Acceleration/braking ramps: 10/10 Timer: 1 min to 99 min, continuous, short-spin Dimensions (WxDxH): 700 x 608 x 345 mm Weight: 99 kg Equipped with: 1x Eppendorf FA-45-6-30 fixed angle rotor (max 12100 rpm, 6x 50 mL falcon tube capacity) 1x Eppendorf FA-45-6-30 aerosol-tight lid

This Sanyo MDF-U73V VIP Series Ultra Low Temperature Freezer was removed from a university lab where (more) it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks from use. Internal dimensions - D58.5 W87 H140cm3 Shelves - 53.5 x 85.5cm

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).