Leybold Heraeus Combitron CM 330

Hiden Isochema Intelligent Gravimetric Analist+ DSMS Mass spec This system was removed from a univer (more)sity where it was surplus to requirement. All units power up and are in good cosmetic condition, we are unable to test the system further at our facility. The lab confirmed the system was working prior to removal. The system includes the following: Hiden Gravimetric Gas sorption analyserSN - HALIGA157Powers on, PC has MASsoft Professional Software installed. Hiden Analytical DSMS Dynamic Sampling Mass SpectrometerModel - HAS-301-414 PLSN/Ref - WR 12971 Hiden Analytical HAL301/3FSN - 3F2R-0/A/81447/E Edwards 1.5 PumpModel - E2M1.5Code - A371-32-919SN - 086277133 Vacuubrand Diaphragm Vacuum PumpModel - MD1SN - 31507705 Hiden Analytical Furnace Power ControllerPowers on Parts fitted:Hiden Analytical Model - HAS037001SN - 314001 Hiden Analytical Model - HA-092-0010SN - 310-003 Pfeiffer VacuumModel - TC600SN - 0829014257 Hiden Analytica Cryo Furnace Circulation UnitModel - HAS0221248SN - 314-001 Has 2 Vacuubrand Diaphragm Vacuum Pumps fitted and one spareModel - MD1 PC/Accessories:Dell Vostro 200Dell 19" Monitor & KeyboardIBM MouseAll Powers on Software discs:Hiden IGA Systems Software CD V2.148Hiden Analytical Software Suite v4.25Software USB - Has above software saved on usb Other accessories included:Blue case of screws & copper gaskets2 x Dilvac Dewar Flask & Containers 2 x 35cm1 x Dilvac Flask 12 x 23cmSmall Furnace - Model HAS0221267 - Unable to test Manuals:IGA Systems manualHiden Vacuum ManualsHiden MASsoft professional manual set

JAVAC DS40 Single Stage High Vacuum Pump This item was removed from a university laboratory where it (more) was surplus to requirements. The vacuum pump powers on and runs. It is in fair cosmetic condition with signs of regular use. Specifications. - Model: DS40 - Motor Type: 63 2M 33 - Serial No.: 961053

Yamato GLD202BB Rotary Vane Vacuum Pump with Stainless Steel Hose, 115V Ultimate Pressure 6.7 x 10 (more)-3 mbar Actual Pumping Speed 200 L/min (50Hz) 240 L/min (60Hz) Weight 31 kg Features - High performance while maintaining low vibration and noise levels - Oil-back flow prevention mechanism - Large sized oil level gauge to ensure accuracy in monitoring vacuum processes - Multi voltage motor - Compatible with a variety of applications Introducing the GLD Series Rotary Vane Pump, a high-performance and low-noise vacuum pump designed to excel in various applications. This pump boasts an array of impressive features, including a gas ballast valve, oil-back-flow prevention mechanism, and a generously sized oil level gauge. With its multi-voltage motor and adherence to international standards, it ensures versatility and compatibility across different setups. Perfectly suited for applications in the fields of chemistry, scientific experimentation, analyzers, and laser systems, this pump also excels as a backing pump for electronic microscopes, semiconductor equipment, sputtering and vacuum evaporation equipment, as well as vacuum and freeze dryers. Plus, with a noise level of just 57 db(A) or less, it ensures a quiet and efficient operation. Experience superior performance and reliability with the GLD Series Rotary Vane Pump, your ideal choice for vacuum solutions.INCLUDED: The Yamato GLD202BB Rotary Vane Vacuum Pump with Stainless Steel Hose, 115V includes: - Hose Clamp - NW25 Centering O-Ring - SUS Flexible Hose KF25 x 1500mm - Oil Mist Trap - Power Cord - One Year Manufacturer's Warranty

The Pfeiffer Vacuum TMH 064 Turbo Pump is designed for a wide range of applications in the research  (more)industry. Features: The pump of explosive gases or corrosive gases. Can be operating where there is a danger of explosion The pumping of gases and vapours which attack the materials of the pumps. Operations with improper gas modes High vacuum flange: ISO-K High vacuum seal: Viton Final pressure: < 1 x 10-8 mbar Flow Rate (N2): 30 l/s Weight: 3.5 kg

Capacity (max.): 5.5 l/min Final vacuum (max.): 160 mbar Operating pressure (max.): 2.4 bar Permissi (more)ble medium temperature: 5 – 40 °C Permissible ambient temperature: 5 – 40 °C Weight: 1.9kg

Deliver precise vacuum and offer widely diverse control functions for a huge range of applications i (more)n the laboratory. The intuitive user guidance on the hand terminal ensures ease of operation; the process parameters can be entered over a touchscreen and a rotation knob. Ajustment capabilities: Units of measurement The operating language The operating mode Parameters, such as the setpoint pressure or suction capacity of the system direct over rotation knob. Depending on the selected operating mode, the graphic display of the hand terminal then indicates the respective process variables. The user can intervene in the ongoing process at any time with the hand terminal and its integrated touchscreen and rotating knob. The hand terminal can be located via vacuum pump system (paging); the hand terminal will answer with a signal tone. Four operating modes: Evacuate – The vacuum pump system evacuates a vacuum chamber with adjustable pump capacity. Pressure control – The vacuum pump system controls the system pressure to the set value (constant pressure). Automatic – The vacuum pump system automatically finds the vapour pressure of the sample and adjusts the process pressure accordingly. Individual pressure function – The vacuum pump system controls the process according to a user-defined pressure curve. The setpoint pressure and the opening and closing of the coolant valve (accessory) on the high-performance condenser can be easily entered for a range of set times. A repeat function allows successive repetitions of the programmed pressure curve.At any time during an active process, you can switch to manual process control. Functions for Evacuate and Pressure control will be available simultaneously. Flow rate (at atm. pressure): 1.26 m³/h Flow rate (at atm. pressure): 21 l/min Ultimate vacuum (< 5.0 with gas ballast valve in use): 2.0 mbar abs. Operating pressure (max.): 0.5 bar (rel.) Dimensions (WxHxD): 366 x 423 x 294 mm Weight: 15 kg

KNF VC 900 Vacuum Controller, 100-240V Measurement Range 0 to 1100 mbar Measurement Accuracy ± 1 mb (more)ar Protection Class IP30 Features - Simple, versatile vacuum control with digital display - Simple, intuitive operation - Compatible with virtually all diaphragm vacuum pumps - Four different operating modes - Enables variable speed control and automatic pressure detection when paired with KNF N 920 G, N 820 G and N 840 G pumps - USB interface for PC control - Separate control unit with pressure sensors and two-step controlled valve to be placed independently from the operating unit The KNF VC 900 Vacuum Controller, 100-240V is an independent control unit for any vacuum source. Features a touchscreen control, pressure sensors, and a two-step-controlled valve. Optimizes lab bench space by allowing hands-free operation of the central vacuum unit. INCLUDED: The KNF VC 900 Vacuum Controller, 100-240V includes: - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Interfurn Sink cabinet Blue 900x600x490

F2-class mass standards represent an impressive level of precision in mass measurement. Classified a (more)s metrology grade F2, they are recognized as top-quality tools suited for advanced applications where precision is a key element. F2 mass standard: flat polygonal sheet Nominal value: 100 mg Material: nickel silver F2 Class Mass Standards &ndash; Key Features Exceptional Measurement Precision - F2 class mass standards feature excellent measurement precision achieved through stringent standards for allowable deviation from actual weight. Stability under Dynamic Conditions - An important feature of F2-class mass standards is their ability to maintain measurement stability even under dynamic measurement conditions. They are designed to cope with a variety of factors that affect measurement precision. Calibration at the Highest Level - The calibration process of F2-class mass standards adheres to the most stringent norms and standards. This makes the standards of this class recognized as tools with the highest degree of accuracy, complying with international requirements. Use of Materials with Outstanding Properties - F2 class mass standards are often constructed from materials with outstanding physical properties. This ensures not only excellent precision, but also exceptional durability. Application 1. Scientific Research at the Highest Level In scientific research, especially in fields that require the utmost precision, such as nuclear physics or astrophysics, F2 class mass standards are indispensable. 2. Metrology Industry In metrology laboratories engaged in testing and maintaining the most advanced measurement standards, F2 class standards are indispensable working tools. 3. High-Precision Testing Laboratories In laboratories specializing in research requiring the highest precision, such as forensic laboratories and materials testing, F2 class mass standards are essential. 4. Aerospace Industry In the precision mass measurements required in the aerospace industry, F2 class standards provide reliability and excellence. F2 class mass standards are the symbol of the highest precision in the field of mass measurement. Their use is crucial in the most advanced fields of science, industry and research.

Temperature range: 20 – 100°C Temperature stability: ± 0.02°C Temperature resolution: 0.1°C Pump flo (more)w rate (at 0 bar): 10 l/min Pump pressure (at 0 L): 0.12 bar Heater capacity: 2 kw Dimensions (WxDxH): 170 x 330 x 360 mm Bath opening (WxDxH): 150 x 150 x150 mm Capacity: 4.5 L Weight: 4.0 kg