IKA VACSTAR Digital Vacuum Pump

This listing is for 1 of 2 Watson Marlow SCIQ 323 Peristaltic Pump. The unit is in full working con (more)dition and is ready for immediate release. The Sci-Q 323 range is designed exclusively for scientific pumping needs, and brings a stunning level of performance and quality to the bench top.   323S high-performance manual control variable speed pump • High-performance microprocessor controlled pumps • 323S can be extended with 313X extension pump heads to five channels • Flow rates to 2000ml/min and 133:1 speed control ratio   323S speed adjusts in 1rpm steps from 3 to 400rpm. keypad lock prevents tampering or accidental changes, auto restart for mains failure recovery, switchable between 100-120V or 220-240V, MemoDose facility for accurate single shot dosing.   323S drives may also be fitted with 314 four roller pump heads if lower pulsing is required, or with 313D2 or 314D2 pump heads which accept 2.4mm wall thickness tubing for higher pressure operation or pumping more viscous fluids.   For low-flow pumping, up to ten channels, 323S drives may be fitted with 314MC (four-roller) micro-cassette pump heads, which can be extended to ten channels by adding one 314MCX or 318MCX extension pump head. This pump is fitted with one 314MC head and will be supplied with an additional spare 314MC as per images   Serial# H041702   Dims 27cm (D) x 22cm (W) x 12cm (H)

Diaphragm vacuum pump KNF N022AN.18 Final pressure/ultimate vacuum (abs.) (mbar): 181 mbar (see phot (more)o) Model: N022AN18 Technical specifications: Voltage: 230 V, 50 Hz Current: 0.7 A Power: 100 W Max. pressure: 4 Bar Pump flow rate: 15 l / min External dimensions (W) x (D) x (H): 28 x 20 x 23 cm Equipment tested Year of manufacture: 2007

ProMinent Dosing Pump gamma/L Type, Gala 1000NPB200UB000000 This was removed from a university lab w (more)here it was surplus to requirements. The unit is in good cosmetic condition and powers up without issue.

KNF SC 920 G IP20 Diaphragm Pumping System w/ Wireless Remote Control Ultimate Vacuum 2 mbar Maximu (more)m Flow Rate 21L/min (1.26 m3/h) Protection Class IP20 Features - Programmable adaptive vacuum control with four operating modes - Automatic, accurate recognition and monitoring of the boiling point using the integrated ramp function - High recovery rates even with low boiling point solvents - Precision pressure-detection system ensures consistent results - Inlet separator and outlet condenser for excellent solvent recovery - Integrated gas ballast valve - Corrosion-resistant - Quiet operation - Optimized suction capacity - Clean, 100% oil-free operation Compact, portable adaptive vacuum system with chemically resistant diaphragm pump, separator, condenser, and vacuum controller. Ideal for rotary evaporation and other applications where control of vacuum level is important. INCLUDED: The KNF SC 920 G IP20 Diaphragm Pumping System w/ Wireless Remote Control includes: - 2 x Coated Collection Flasks - 2 x Flask Clamps - USB Cable for Connecting to PC - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Hei-FLOW Core 600 Peristaltic Pump This pump of the Hei-Flow Core series is particularly su (more)itable when high volumes need to be transported easily. A flow rate of 4.0 - 4,151 ml / min can be set for this purpose. This model is designed for the use of single-channel pump heads.Even with a load change, the speed of 50 — 600 rpm is kept constant at a control accuracy of ±5%. It is easy to switch to the reverse direction of rotation. Click Here to View Product Video INCLUDED: The Heidolph Hei-FLOW Core 600 Peristaltic Pump includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Edwards E2M1.5 Vacuum Pump Ultimate Vacuum 3 x 10-3 mbar Inlet Connection NW10 Displacement 2.2 m3h- (more)1 / 1.3 ft3min-1 Features - High ultimate vacuum and rapid pumping speed ensure efficient operation across a wide range of laboratory and industrial applications - Quiet operation provides a comfortable working environment, reducing noise in sensitive areas - Features a pressurized oil system that lubricates pump shaft bearings and rotor sealing faces for reliable performance - Maintenance is simplified with an oil sight-glass for easy monitoring of oil levels and conditions at a glance - Facilitates easy oil changes with an oil drain plug that allows either gravity or pressure oil drainage for convenience - Compact, freestanding design allows flexible use without the need for additional support structures - Ideal for use with analytical instruments, leak detectors, helium research, and for backing turbomolecular pumps, showcasing its versatility The EM range of oil‑sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single‑phase or three‑phase (four pole) motor. Click Here to View Product Video INCLUDED: The Edwards E2M1.5 Vacuum Pump includes: - Edwards Ultragrade Performance 15 Oil - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

This listing is for a Watson Marlow 520S Peristaltic Pump. The unit is in full working condition an (more)d is ready for immediate release. Peristaltic pumps are the simplest possible pump, with no valves, seals or glands to clog or corrode. The fluid contacts only the bore of a tube, eliminating the risk of the pump contaminating the fluid, or the fluid contaminating the pump. Peristaltic pumps can operate dry without risk. Easy to install, simple to operate and inexpensive to maintain, peristaltic pumps are ideal for most fluids, including viscous, shear-sensitive, corrosive and abrasive fluids, and those containing suspended solids. Suitable for metering, dosing and dispensing applications.   520S drive offers manual control via a large-key membrane keypad: speed adjustment; run and stop; forward/reverse; "Max" key for rapid priming and purging.   Supply voltage/frequency: 100-120V/200-240V 50/60Hz Flow rates from 4 micro-litres/min up to 2.4 liter/min Precise 2,200:1 speed control range from 0.1 to 220 rpm in 0.1 rpm increments Large speed/flow display and easy to use tactile membrane keypad. Incorporates keypad lock Manual control and flow rate calibration MemoDose for accurate single shot dispensing

LABORATORY OVEN SLW SMART POL-EKO SLW - FORCED AIR CONVECTION The SLW series laboratory ovens are de (more)signed to reach high temperatures, up to 300 °C. Available from 15 to 1000 liters with latest generation control, quality materials and top-class performances. Large touchscreen, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading and you will be amazed. ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use, just like your smartphone. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - 4,3", clear, full colour touch screen - USB and LAN ports for data transfer - multi-segment time and temperature programs - loop function up to 255 times or endless - adjustable start delay feature - adjustable ramps - recording of min, average and max temperature value for each segment - overview of set and current parameters while operating - operating in temperature or time priority mode - fan speed control in the range of 0 … 100% or 10% … 100% (depending on the chamber capacity) - temperature sensor fail alarm - possibility of temperature calibration by the User - power failure control system (program continued after restoring power) - visual and sound alarm - internal memory for programs and data storage - operating with gloves on - event registry - user manual for direct download QUALITY FIRST Resistant. Durable. POL-EKO ovens are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The SLW SMART series ovens are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Powder coated sheet metal structure (graphite front panel) - Stainless steel interior - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +105°C) SLW SMART SERIES The 10 models of the SLW series cover most of your needs: from mini oven to the 1000 liter internal volume model. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for incubator models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your oven with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

Micromeritics Gemini w/ Flow Prep 60 These items were removed from a university lab where they were  (more)surplus to requirements. Both power up but have not been tested further. They are both in good cosmetic condition, with minor marks from use. All items included; 1x Micromeritics Flow Prep 60:Model FlowPrep 060 LB 1x Micromeritics Gemini:ModelGemini 1x Micromeritics Gemini Remote:Model 2360 1x Micromeritics Memory CardModel Gemini 2360

IKA C-MAG HS 7 hotplate stirrer. 180*180 mm glass-ceramic hotplate. Stirring capacity 10 L. Speed ra (more)nge from 100 to 1500 rpm on a scale from 0 to 6. Temperature range from 50 to 500 °C. Heating rate 5 °C/min. LCD indicator. Fixed 550 °C safety circuit. Hot surface warning. to protect against burns. Digital indicator of error codes. It has small defects in the paint due to splashes. Dimensions (W x H x D) 215*105*330 mm. Weight 5 kg. User manual. IKA C-MAG HS 7 hotplate stirrer. New magnetic stirrer with heating and glass ceramic hotplate, characterized by very high chemical resistance.