Heidolph Rotavac Vario Control Vacuum Pump, 115V

BOC Edwards Turbomolecular Pump EXT 255Hi B753-03-000 This was removed from a university lab where i (more)t was surplus to requirements. The unit is in good cosmetic condition but has not been tested.

This listing is for 1 of 2 QuattroFlow QF15ACUEGN-UK Single-use Pump Diaphragm Pump. The unit is in (more) full working condition and is ready for immediate release. The QuattroFlow QF150 Diaphragm Pump is an efficient, 4-piston pump designed for handling water-like fluids in various sectors, including pharmaceuticals, biotech, food, and cosmetics. Here’s a detailed overview of its features, specifications, and applications: Key Features: Flow Rates: Max Flow Rate: 3° Eccentric Shaft: Up to 100 l/h (1.67 l/min) 5° Eccentric Shaft: Up to 180 l/h (3 l/min) Min Flow Rate: Both shaft angles start at 1 l/h (0.017 l/min). Pressure Ratings: Maximum operating pressure of 6 bar (87 psi) for fluids < 40°C; 4 bar (58 psi) for fluids > 40°C. Temperature Ratings: Maximum fluid temperature: 80°C (176°F). CIP (Clean-in-Place) and SIP (Sterilize-in-Place) capable up to 90°C (194°F) and 130°C (260°F), respectively. Suction Lift: 3° Shaft: 1-1.5 m (3.2-4.9 ft) 5° Shaft: 2-3 m (6.6-9.8 ft) Volume Specifications: Approximate volume per revolution: 3°: 0.72 ml 5°: 1.2 ml Total filling volume (without connectors): 15 ml. Material Construction: Wetted Materials: SS316L (pump housing, valve plate), Santoprene (diaphragms), EPDM (valves, O-rings). Non-Wetted Materials: SS316L for bearing housing and base plate. Dimensions and Weight: Length: 257 mm (10.2 in); Width: 164 mm (6.5 in); Height: 185 mm (7.2 in); Weight: 9.8 kg (22 lb). Slight variations in dimensions and weight depending on models. Advantages: Versatility: The QF150 can handle a wide range of fluids, including: Biological Solutions: Proteins (e.g., IgG, monoclonal antibodies), enzymes, and vaccines. Suspensions and Polymers: Silicon, latex, and chromatography media. Cell Suspensions: Bacteria, yeast, algae, and mammalian cells. Food Products: Dairy products and gelatine. Low-Shear Design: Ensures gentle handling of sensitive materials, maintaining their stability and functionality. CIP/SIP Capable: Facilitates easy cleaning and sterilization, crucial for maintaining hygiene in production environments. Compact and Lightweight: Easy to integrate into laboratory or production settings without occupying much space.

KNF IP65 UFEM 1.10 ST.18S2 Liquid PumpKNF SIMDOS diaphragm pumps offer a variety of options to suit  (more)most laboratory liquid metering and dosing needs. The UFEM 1.10 ST.18S2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1– 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 UFEM 1.10 ST.18S2 Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF LABOPORT N 840 G Diaphragm Pump Ultimate Vacuum 6 mbar Maximum Flow Rate 34L/min (2.04 m3/h) Pr (more)otection Class IP30 Features - Adjustable speed control - ATEX compliant to (Ex) II 2/-G IIB+H2 T3 internal atmosphere only - Ideal for extremely aggressive/corrosive gases and vapors - Chemically-resistant PTFE/FFPM flowpath - Clean, 100% oil-free operation - Compact, quiet and reliable - Maintenance-free - Small footprint to optimize workspace The KNF LABOPORT N 840 G Diaphragm Pump is a chemically resistant, compact and oil-free diaphragm vacuum pump with manual speed control for adjusting the pump capacity to your specific application. It features a gas ballast, PTFE/TFM heads, PTFE-coated diaphragms and FFPM valves. Suitable for a wide range of Laboratory applications including extremely aggressive/corrosive gasses and vapors. INCLUDED: The KNF LABOPORT N 840 G Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND MZ 2C VARIO Select Chemistry Diaphragm Pump Ultimate Vacuum 7 mbar (5 Torr) Maximum Pump (more)ing Speed 1.65 CFM at 60Hz Number of Heads/Stages 2/2 Features - VACUU-SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory - Automatic boiling point detection and adjustment of the vacuum for short process times - Extraordinary diaphragm life for minimum operational and servicing costs - Excellent chemical resistance The MZ 2C VARIO select pump is an excellent solution for labs working with most common solvents. The integrated VACUU-SELECT controller provides an easy-to-use, application-based interface that covers all common lab applications. The VACUU-SELECT controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the VACUU-SELECT controller detects the boiling pressure and automatically adjusts the pump to maintain process control. On-demand motor speed control yields not only improved vacuum control, but it also results in unparalleled service intervals for wear parts like diaphragms and valves. Typical applications are all evaporation processes. Evaporation processes can be run fully automatically and with short process times and high sensitivity at the same time. The VARIO control ensures high process reliability through prevention of superheating or foaming. The control allows for automatic vacuum level adaptation and is self-adapting to changing process parameters at any time. The VACUU-BUS interface facilitates a user-friendly configuration of even complex vacuum installations. INCLUDED: The VACUUBRAND MZ 2C VARIO Select Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND VACUU-PURE 10C Screw Pump Ultimate Vacuum 0.005 mbar (0.0038 Torr) Maximum Pumping Speed (more) 5.3 CFM Inlet/Outlet Connection Small Flange KF DN 25 Features - 10-3 mbar vacuum range - 100% oil-free - Chemically resistant - No wear parts The dry screw pump VACUU-PURE® 10C reliably delivers the benefits of oil-free vacuum technology in the pressure range of 10-3 mbar. The new vacuum pump combines three important benefits for the user: 100% oil-free, chemically resistant, and no wear parts. VACUU-PURE 10C is ideally suited for clean processes and the production of pure products. The screw pump is especially designed for processes in the vacuum range down to 10-3 mbar, however unlike other fine vacuum technologies it can be used across the entire pressure range from atmospheric pressure to its ultimate vacuum. At the same time, aggressive gases and vapors can be pumped without any worries because of the high chemical resistance. The use of a cold trap is no longer necessary in most applications. VACUU-PURE easily handles high vapor loads through its extraordinary condensate compatibility. Thanks to this capability, a gas ballast is unnecessary, avoiding associated disadvantages like the reduction in pumping speed and an increase in noise levels. The integrated regeneration mode enables rapid drying of the pump at the end of the process. This allows sample throughput to be increased significantly as compared to other pump technologies. INCLUDED: The VACUUBRAND VACUU-PURE 10C Screw Pump includes: - 2 x Centering Rings - 2 x Clamping Rings - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This CIF Automatic Silent Compressor SA 15 was removed from a university lab where it was surplus to (more) requirements. The unit has been professionally serviced and is in full working order. It cycles in and out correctly. It is in reasonably good cosmetic condition but the pressure gauge is missing its plastic window.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The QIAgility is a compact benchtop instrument that enables rapid, high-precision setup of PCR exper (more)iments with ready-to-use software for ease and convenience. The software provides step-by-step guidance for worktable setup and automatic calculation of all mixes, eliminating the need to program pipetting steps. Just select the kit and cycler, define your targets and start the run. For added flexibility the QIAgility is operated via a laptop computer. The instrument is highly suited for laboratories performing PCR and RT-PCR reactions with applications in: ​ Gene expression analysis Genotyping Cloning Pathogen detection Food and veterinary testing Pipetting head: Single channel Tip volume: 1 – 200 µl HEPA filter: Preinstalled dual-cartridge HEPA filter system provides positive pressure clean air within the closed hood. Liquid-level sensing: Minimum detection volume (10 µl in 200 µl PCR tubes). Only functional in combination with QIAGEN Conductive Filtered Tips. Table capacity: 6x SBS positions (127.76 x 85.48 mm) for adapters and Tip Rack Holders 1x Master Mix Block 1x Reagent Block Precision: CV <1%, 5 – 200 µl (dry-well transfer) CV <5%, 2 – 5 µl (wet-well transfer) CV <10%, 1 µl UV lamp: Preinstalled UV lamp for worktable decontamination Dimensions (HxWxD): 450 x 540 x 630 mm Weight: 41 kg

The Esco Infinity Class II Biological Safety Cabinet (BSC), model FC2, offers superior protection to (more) the cabinet operator, product and the environment. With over 20 years of experience in safety cabinet technology, the Esco FC2 cabinet brings you the optimum combination of safety, performance and serviceability with an enhanced ergonomic design. Class II cabinets provide product, operator and environmental protection making them suitable for general microbiological work with agents assigned to biosafety levels 1, 2, and 3. With their diverse range of applications, class II cabinets are the most cost-effective systems on the market. The Infinity Class II BSC is designed, built and tested to comply with Australian Standard AS 2252.2 performance requirements and European Standard EN12469. External Dimensions (LxWxH): 1420 x 805 x 1535 mm Internal Work Zone (LxWxH): 1260 x 610 x 670 mm Tested Opening: 175 mm Inflow Initial setpoint: 1.10 m/s Downflow Initial setpoint: 0.41 m/s HEPA Filter Efficiency: >99.99% at 0.3µm Sound According to EN12469: <65 dBA Fluorescent Lighting: >1200 Lux, measured at work surface level (zero background) as per NSF49 test grid UV-interlock ensures that the UV lamp is deactivated when the sash is not fully closed. Main Body Construction: 1.2mm thick gauge electro-galvanised steel with Isocide anti-microbial white oven-baked epoxy-polyester powder-coated finish Net Weight: 298 kg

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R &ndash; resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR &ndash; infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C &ndash; capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).