Heidolph Rotavac Valve Tec Vacuum Pump

VACUUBRAND MZ 2C NT Chemistry Diaphragm Pump Ultimate Vacuum 7 mbar (5 Torr) Maximum Pumping Speed  (more)1.4 CFM at 60Hz Number of Heads/Stages 2/2 Features - Outstanding chemical resistance and superior vapor tolerance - High performance even at low vacuum levels - Optimized vacuum even with gas ballast for condensate purge - Whisper quiet and low vibration - Long diaphragm life, maintenance-free drive system Chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The two-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum. All parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life. The pump MZ 2C NT is equipped with a gas ballast valve for continuous condensate purge increasing the pumping capability of condensable vapors. This pump is our most popular chemistry diaphragm pump, and is the heart of a family of VACUUBRAND pumping systems. The NT-series features further improved performance data and superior vapor tolerance. Two-stage chemistry-design diaphragm pumps are an excellent choice for applications with corrosive gases and vapors with medium vacuum requirements. They do not consume water and therefore do not produce any contaminated waste water. The media contacted materials made of chemically resistant fluoroplastics open a wide range of applications in chemistry and pharmaceutics. The robust design provides very good durability and long service intervals even in demanding chemistry applications. Typical usages are vacuum generation for rotary evaporators, vacuum concentrators, gel dryers, vacuum ovens and many other laboratory applications. The MZ 2C NT is the powerful basic pump for a complete family of well established and reliable chemistry vacuum systems and pumping units.INCLUDED: The VACUUBRAND MZ 2C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF UN820.3FTP IP44 Diaphragm Pump Ultimate Vacuum 8 mbar (abs.) Maximum Flow Rate 20L/min (1.2 m3/ (more)h) Protection Class IP44 Features - 100% oil free transfer - Pure transfer, evacuation and compression - Highly compatible with vapors and condensation - Chemically-resistant PTFE/FFPM flowpath - Suitable for aggressive or corrosive gases and vapors - Maintenance-free - Environmentally friendly - Compact, quiet and reliable TheKNF UN820.3FTP IP44 Diaphragm Pump isa dry-running device used in a wide range of laboratoryapplications. They transfer, compress and pump down without contamination. Theheart of these very compact pumps is a KNF structured diaphragm. This patenteddiaphragm was stress-optimized using the Finite Elements method. As a result,KNF was able to make the pump smaller while increasing the service life of thediaphragm. This pump is 115V. INCLUDED: The KNF UN820.3FTP IP44 Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF SC 920 G IP20 Diaphragm Pumping System w/ Wireless Remote Control Ultimate Vacuum 2 mbar Maximu (more)m Flow Rate 21L/min (1.26 m3/h) Protection Class IP20 Features - Programmable adaptive vacuum control with four operating modes - Automatic, accurate recognition and monitoring of the boiling point using the integrated ramp function - High recovery rates even with low boiling point solvents - Precision pressure-detection system ensures consistent results - Inlet separator and outlet condenser for excellent solvent recovery - Integrated gas ballast valve - Corrosion-resistant - Quiet operation - Optimized suction capacity - Clean, 100% oil-free operation Compact, portable adaptive vacuum system with chemically resistant diaphragm pump, separator, condenser, and vacuum controller. Ideal for rotary evaporation and other applications where control of vacuum level is important. INCLUDED: The KNF SC 920 G IP20 Diaphragm Pumping System w/ Wireless Remote Control includes: - 2 x Coated Collection Flasks - 2 x Flask Clamps - USB Cable for Connecting to PC - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Hei-FLOW Core 120 Peristaltic Pump This peristaltic pump is ideal for the simple conveying  (more)of all media. The pump drive of this model makes it possible to switch between a single channel and multi-channel pump head. By simply flipping the switch, it can also be conveyed in an anti-clockwise direction.Depending on the adapted pump head, a flow rate of 0.83 - 861 ml/min for the single-channel and 0.005 - 364 ml/min for the multi-channel pump head is guaranteed. The Core 120 conveys with a control accuracy of ± 5% at a speed range of 10 - 120 rpm. Click Here to View Product Video INCLUDED: The Heidolph Hei-FLOW Core 120 Peristaltic Pump includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Edwards nXDS15i Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases an (more)d bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally.Click Here to View Product Video INCLUDED: The Edwards nXDS15i Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards nXDS15i Dry Scroll Pump Technical SpecificationsNominal rotational speed1800 rpmDisplacement17.1 m3h-1 / 10.1 ft3min-1Peak pumping speed15.1 m3h-1 / 8.9 ft3min-1Ultimate vacuum (total pressure)0.007 mbar / 0.005 TorrMinimum standby rotational speed1200 rpmSpeed control resolution (percentage of full rotation speed)1%Pumping speed at minimum rotational speed9.9Maximum continuous inlet pressure200 mbarMotor power 1-ph300 WPower connector 1-phIEC EN60320 C13Recommended fuse10A, 250Vac rmsWeight25.2 kg / 56 lbInlet flangeNW25Exhaust flangeNW25Noise level52 dB(A)Vibration at inlet flange< 4.5 mms-1 (rms)Leak tightness (static)< 1x10-6 mbar ls-1Operating temperature range10 to 40 °C / 41 to 104 °FElectrical Supply115/230VComparison of ModelsSpecificationEdwards nXDS6iEdwards nXDS10iEdwards nXDS15iEdwards nXDS20iNominal rotational speed (rpm)1800180018001800Displacement (m³h⁻¹ / ft³min⁻¹)6.8 / 4.012.7 / 7.517.1 / 10.128.0 / 16.5Peak pumping speed (m³h⁻¹ / ft³min⁻¹)6.2 / 3.611.4 / 6.715.1 / 8.922.0 / 13.0Ultimate vacuum (total pressure) (mbar / Torr)0.020 / 0.0150.007 / 0.0050.007 / 0.0050.030 / 0.022Weight (kg / lb)26.2 / 5825.8 / 5725.2 / 5625.6 / 56Inlet flangeNW25NW25NW25NW25Noise level (dB(A))52525252Operating temperature range (°C / °F)10 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 104Electrical Supply115/230V115/230V115/230V115/230V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

VWR LAB DISC magnetic stirrer Ultra-flat and compact magnetic stirrer with no moving parts. Reverses (more) the direction of rotation every 30 s to ensure optimal mixing. Direction of rotation reversible adjustable Wear-free training Plate and housing made of chemical resistant materials Non-slip and stable Model: Lab Disc Speed range: 15 - 1500 min⁻¹ Max mixing capacity H₂O: 800 ml Plate material: polyester Plate, LxW: Ø 100 mm Weight: 0.3 kg Input/output power: 5/3 W W×D×H: 117×180×12 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for an Eppendorf 5415D Centrifuge The Centrifuge 5415 D is a non-refrigerated bench (more)-top centrifuge and is used in research and routine laboratories in the biosciences, industry, clinics and chemistry.With their space-saving design and user-friendly operating concept, these centrifuges are ideal for everyday routine tasks.The basic functions can be selected using the "SHORT" key and the "TIME" and "SPEED" dial. The values appear in the display in digital form.Power supply: 230 V / 50 – 60 Hz 120 V / 50 – 60 Hz see identification plate Power requirement: 180 W Max. rotational speed: 13,200 rpm Max. centrifugal force: 16,110 rcf Max. load: 24 x 2.0 ml Safe-Lock Micro Test Tubes or 36 x 0.5 ml tubes Max. kinetic energy: 3,100 Nm Max. density of material to be centrifuged: 1.2 g/ml Ambient temperature: 2 °C – 35 °C Max. relative humidity: 75 % Dimensions: Height:230 mm Depth: 310 mm Width: 230 mm Weight (without rotor): 8.5 kg Acceleration time (230 V): < 13 sec. Deceleration time: < 11 sec. Acceleration time (100 / 120 V): < 15 sec. Deceleration time: < 13 sec.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW