Edwards E2M28 Vacuum Pump Vakuumpumpe

This New Era Pump Systems Syringe Pump Model: 9000 was removed from a university lab where it was su (more)rplus to requirements. The item is in good used condition.The item powers on and appears to function correctly, but we were unable to test it further. Flow rates range from a minimum of 0.041 mL/min (0.001386 oz/min) to a maximum of 904.4 mL/min (30.6 oz/min) with 3/16" id tubing.

Ultimate Vacuum 1x10-3 mbar Inlet Connection NW25 Displacement 25.0 m 3h-1 / 14.7 ft 3min-1 Features (more) - High ultimate vacuum and rapid pumping speed make it the industry standard for laboratory and light industrial applications - Quiet operation ensures a comfortable working environment, reducing noise in sensitive areas - Freestanding design with a flexible coupling driven by either a single-phase or three-phase (four pole) air-cooled motor for versatile use - Supplied with essential accessories, including 2 x 1 liter of Ultragrade 19 oil, O-ring and centering ring, two Allen keys, and spare seals for oil drain and filter plugs - Features a pressurized oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces for reliable performance - Includes an oil distribution valve to prevent oil discharge to the pump interior after stopping, enhancing safety - Airtight pumping chambers prevent suckback unless the gas ballast valve is open, maintaining system integrity - Facilitates easy oil changes with an oil drain-plug for gravity or pressure oil drainage Edwards E2M18FX Vacuum Pump 115/230V The EM range of oil sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single phase or three phase (four pole) air cooled motor. Each EM pump is supplied with 2 x 1 litre of Ultragrade 19 oil, O ring and centering ring, two Allen keys and spares seal for oil drain and filter plugs. For PFPE prepared FX pumps Fomblin® to be ordered separately. This is a single stage oil sealed rotary vane pump which has a pressurised oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior after the pump stops. The pumping chambers are air-tight, so this arrangement also prevents suckback unless the gas ballast valve is open. You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow either gravity oil drain or pressure oil drain. Click Here to View Product Video INCLUDED: The Edwards E2M18FX Vacuum Pump 115/230V includes: - O ring and centering ring - Two Allen keys and spares seal for oil drain and filter plugs - Operator's Manual - 1 Year Manufacturer's Warranty

Edwards nEXT85D NW40 NW16 - 80W Turbomolecular Vacuum Pump Ultimate Vacuum <5x10-9 mbar Inlet Con (more)nection NW40 Pumping Speed Nominal 0.047 m³/s Features - Combines oil-lubricated ceramic and dry permanent magnetic bearings for enhanced durability - Built-in electronics for streamlined operation and easy integration with control systems - Enhances speed and compression efficiency for a wide range of applications - Allows for in-field replacement of oil cartridges and bearings with minimal tools - Offers standard, high light gas compression, and additional regenerative stage options for specific needs - Provides superior compression performance for various gases - Ensures efficient operation with reduced electrical interference - Magnetic bearings reduce noise and vibration, ensuring a stable vacuum environment nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.With nEXT85 and nEXT55 Edwards offers a small and compact turbomolecular pump platform ideal for Analytical Instruments as well as for the R&D market.Features and BenefitsUpper magnetic bearing - ensures clean vacuum, low power and low vibration. Optimised rotor designs - deliver high speeds and high compression. Range of variants suitable for many applications - D = standard nEXT pump variant, H = optimised rotor design for high light gas compression and T = additional regenerative stage for increased compression and higher backing pressure capability Integrated controller / electronics - offers direct I/O or serial control or can be connected to one of our TAG or TIC controllers for easy systemisation. Fully user serviceable - oil cartridge and bearings can be changed in the field with minimal tooling. Inlet screen - supplied as standardINCLUDED: The Edwards nEXT85D NW40 NW16 - 80W Turbomolecular Vacuum Pump includes: - Power Cord - One Year Manufacturer's Warranty

Edwards nXR30i NW25 Multi Stage Roots Dry Pump Ultimate Vacuum 0.03 mbar (0.022 Torr) Inlet Connecti (more)on NW25 Displacement 25.0 m3h-1 / 14.7 ft3min-1 Features - High ultimate vacuum and rapid pumping speed ensure efficient operation across a wide range of laboratory and industrial applications - Quiet operation provides a comfortable working environment, reducing noise in sensitive areas - Freestanding design driven by a flexible coupling with either a single-phase or three-phase (four pole) motor - Achieves excellent vacuum levels, including 1 x 10⁻³ mbar without gas purge and 1.5 x 10⁻¹ mbar with gas purge - Equipped with NW25 inlet connection and a removable 15 mm nozzle outlet, allowing flexible integration into existing systems - Operates efficiently within a temperature range of 13-40°C, accommodating different environmental conditions - Facilitates easy oil changes with a maximum oil capacity of 1.05 liters and a minimum capacity of 0.75 liters - Ideal for use with analytical instruments, leak detectors, helium research, and for backing turbomolecular pumps, showcasing its versatility Edwards has revolutionised the vacuum pump market with the new nXRi high performance, compact dry pump. It delivers unrivalled pumping speeds in the most compact package, with pumping speeds of 30 to 120 m3h-1. The nXRi's lower input power and zero maintenance create real performance improvements and cost benefits across a range of applications.Analytical Instrument OEMs benefit from the ease of integration into most vacuum systems for a ready to go vacuum solution, perfect for mass spectrometry, electron microscopy and leak detection. R&D and Industrial customers will enjoy the design flexibility, oil-free and low maintenance features.Click Here to View Product Video INCLUDED: The Edwards nXR30i NW25 Multi Stage Roots Dry Pump includes: - Operator's Manual - 1 Year Manufacturer's Warranty

Heidolph Hei-FLOW Core 600 Peristaltic Pump This pump of the Hei-Flow Core series is particularly su (more)itable when high volumes need to be transported easily. A flow rate of 4.0 - 4,151 ml / min can be set for this purpose. This model is designed for the use of single-channel pump heads.Even with a load change, the speed of 50 — 600 rpm is kept constant at a control accuracy of ±5%. It is easy to switch to the reverse direction of rotation. Click Here to View Product Video INCLUDED: The Heidolph Hei-FLOW Core 600 Peristaltic Pump includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

VACUUBRAND MD 1 Diaphragm Pump Ultimate Vacuum 1.5 mbar (1.1 Torr) Maximum Pumping Speed 0.82 CFM a (more)t 60Hz Number of Heads/Stages 4/3 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Excellent ultimate vacuum - Whisper quiet and ultra-low vibration - Proven long diaphragm life, maintenance-free drive system The MD 1 diaphragm pump is an excellent choice for oil-free evacuation and pumping of non-corrosive gases down to 1.5 mbar ultimate vacuum. The three-stage design with precisely guided flat diaphragms provides outstanding pumping speed even close to the ultimate vacuum, especially when compared with similarly rated two-stage diaphragm pumps. The MD 1 is an ultra-low vibration pump with very long diaphragm lilfetime and stable ultimate vacuum documented with years of testing. With a flow path consisting of aluminum and selected plastics (diaphragms and valves made of PTFE/FKM and FKM, respectively) the pumps are suitable for a wide range of applications with non-corrosive gases. The MD 1 is an excellent choice for continuous, oil-free evacuation and pumping of non-aggressive gases. It is suitable for high vacuum requirements at modest gas flow as often needed in physics and analytics. The pump is exceptionally quiet and reliable with long diaphragm and valve lifetimes. With its low ultimate vacuum and compact dimensions the MD 1 is widely used as replacement of rotary vane pumps. Typical applications are exhaust gas analysis, for degassing of small amounts of viscous media and in particular as backing pump for compact turbomolecular drag pumps. Back diffusion of oil or even oil back flow, e.g., into a high vacuum chamber is excluded due to its oil-free operation. For equipment manufacturers customized versions are available.INCLUDED: The VACUUBRAND MD 1 Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Crest P2600D/HF-132 Digital Ultrasonic Cleaner w/ Power Control, 230VFeatures - Ceramically enhanced (more) transducer technology with industrial bonded assembly - Homogenous sound field, energy distribution, and prevention of standing waves using frequency sweeping - Adjustable cleaning time or ability to set for continuous operation - Adjustable bath temperature between 20°C to 80°C - "D" models feature an adjustable ultrasonic power in nine steps, along with a Degas function for consistent sample prep applications - Deep-drawn stainless steel cleaning tank with rounded corners for easy cleaning - Intrinsically safe heater with dry-run protection - Drain valve assembly available for tank capacities of 2.5 gallons or higher 45 kHz and 132 kHz frequencies provide precision cleaning and rinsing options, with 132 kHz available for enhanced sample preparation performance All models feature digital display of temperature and time, with "D" models featuring digital display of the ultrasonic power level Efficiently removes flux from PCB's, fats, paints, surface rust, lime, oils, adhesives, polish residues, chemical residues, dust, and much more The Crest P2600D/HF-132 Digital Ultrasonic Cleaner w/ Power Control, 230V, is an advanced cleaning unit designed for optimal performance and versatility. Operating at an ultrasonic frequency of approximately 132 kHz, it features ceramically enhanced transducer technology with industrial bonded assembly for a homogenous sound field and effective energy distribution. The unit offers an adjustable timer for ultrasonic operation, ranging from 1 to 99 minutes or continuous operation, and an integrated heater with a liquid temperature adjustable up to 80°C in 1K increments. The "D" model allows for ultrasonic power adjustment in nine steps from 40% to 100%, along with a Degas function for consistent sample preparation. The deep-drawn stainless steel cleaning tank, with its rounded corners, ensures easy maintenance, while the intrinsically safe heater with dry-run protection guarantees safe operation. With a substantial tank capacity of 7 gallons (26.1 liters) and an average ultrasonic power of 300 watts, this cleaner is ideal for extensive cleaning applications. Additionally, it includes a drain valve assembly for tanks with capacities of 2.5 gallons or more, enhancing usability and efficiency. The Crest P2600D/HF-132 Digital Ultrasonic Cleaner w/ Power Control, 230V is brand new in box. INCLUDED: The Crest P2600D/HF-132 Digital Ultrasonic Cleaner w/ Power Control, 230V includes: - Tank Cover - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Heidolph 036110272 Hei-PLATE Mix 'n' Heat Core Advanced Sensor Package, 145mm Plate Temperature Rang (more)e 20 to 300°C Speed Range 100 to 1,400 RPM Stirring Capacity 20L Features - User-friendly design of our entry-level model, featuring two rotary knobs for easy access to stirring and heating functions - Set your desired speed and temperature effortlessly using the intuitive scale, with maximum values of 1,400 rpm and 300 °C - Ensure safety with the large safety distance between the heating plate and control elements - Activate the heating function separately with the LED button indicator - Durable and reliable Kera-Disk made of anodized aluminum, offering chemical resistance and scratch proof-properties - Precise heating power and temperature control, backed by PID heating technology - Maximize efficiency with compact dimensions (168 × 101 × 299 mm) The Heidolph 036110272 Hei-PLATE Mix 'n' Heat Core Advanced Sensor Package, 145mm Plate is designed with two rotary knobs to allow direct access to the two main functions. The speed and temperature are set using a scale. The maximum values are 1,400 rpm and 300 °C. This magnetic stirrer is very easy to use and is equipped with the most important safety features. The large safety distance between the heating plate and the control elements, as well as the optical residual heat indicator at temperatures 50 °C, protect against burns. The heating function can be activated separately and is indicated by the LED button lighting up. The patented Kera-Disk® footprint made of anodized aluminum, is chemical-resistant, scratch-proof, and has a diameter of 135 mm. This unique size makes it suitable for use with many accessories and samples on a small footprint. The material used also enables the fastest heating times.Click Here to View Product Video INCLUDED: The Heidolph 036110272 Hei-PLATE Mix 'n' Heat Core Advanced Sensor Package, 145mm Plate includes: - Hei-PLATE Mix'n'Heat Core magnetic stirrer (145 mm diameter) - EKT Hei-Con electronic contact thermometer and Holder - Silicone Protective Cover - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty

Labconco 4-Port Manifold, 8.6" w x 8.6" d x 11.2" h Type 304 stainless steel manifold 4 neop (more)rene valves with plastic knobs accommodate both 1/2 in. and 3/4 in. adapters For use with 1L, 2.5L, 4.5L, 6L, 8L, 12L, or 18L FreeZone Freeze Dryers Freeze Dryer, glassware, and adapters are required (not included) Includes one latching pin INCLUDED: The Labconco 7201700 4-Port Manifold, 8.6" w x 8.6" d x 11.2" h includes: - Latching Pin - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Waterproof stainless steel platform We provide you with waterproof stainless steel platforms with re (more)adability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms are rectangular in 150 x 200 mm, 250 x 300 mm or 400 x 600 mm or square in 410 x 410 mm, 800 x 800 mm, 500 x 500 mm, 600 x 600 mm or 800 x 800 mm. Use the potential Our platforms can work with one of six weighing terminals to choose from: PUE H315, PUE C315, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. Fearless of its contact with moist objects or accidental splashes. The entire stainless steel construction translates into a high degree of protection for these platforms: IP 68.

PS X2.M is a series of advanced-class precision balances of high resolution based on RADWAG MonoBLOC (more)K technology. The innovative construction of PS X2.M balance features a new single-point weighing pan fastening, which ensures its excellent geometry and minimizes eccentricity error. The labyrinth-shape fastening guarantees excellent resistance to contamination. Weighing module RADWAG MonoBLOCK technology enables weighing loads with the readability of d=0.01 g at the maximum capacity of 10 kg. Rigid base ensures stability of the weighing system and great resistance to shocks. Internal adjustment system means precision and high measurement repeatability. Leverage of internal weight mass enables adjustment within the whole measuring range. Features: d=0.01 g readability at 10 kg max capacity great resistance to ambient conditions stability and repeatability over time RADWAG MonoBLOCK technology internal adjustment within the whole measuring range complex databases and ALIBI memory ergonomic 5” colour touchscreen touch-free operation Databases The instrument allows saving completed measurement data as complex reports and graphs. There are 7 databases: Operators (max 100 entries), Products (max 5 000 entries), Weighings (max 50 000 entries), Packaging (max 100 entries) Formulations (max 100 entries), Customers (max 1000 entries), The balance enables creating formulation reports (max 500 entries). ALIBI memory provides data protection and facilitates automatic measurement recording (max 500 000 weighing records). The memory facilitates data previewing, copying and archiving. Communication PS X2.M series is equipped with the following interfaces: 2 x RS 232, USB type A, USB type B, Ethernet and Wireless Connection. USB allows for fast transfer and copying of work results (measurements, reports, databases) to a computer or other weighing device. The balance provides possibility of remote data management.