Edwards E2M28 Rotary Vane Vacuum Pump, 230V, Cat. #: A37324930

BUCHI Syncore Q-101 platform + KNF vacuum pump + V-850 vacuum controller Model: Büchi Analyst Q-101  (more)Vibration frequency: 0 - 300 min⁻¹ Heating power: 1500 W Temperature Range: Up to 100°C W×D: 480×487 mm Included: Rack R-12 Polyvap (120ml) A condensation unit and bottle A KNF vacuum pump A Buchi V-850 vacuum controller Traces of rust in the bottom of the heating element Equipment tested

Millipore Milliflex PLUS Pump MXP PUMP 03 Model : MXP PLUS 03 With 3 Microwire Adapter 3 Filtration (more)s Pumps (Milliflex Plus) 3 x 24W

Leybold Vakuum GMBH Trivac 016B Pump This item was removed from a university lab where it was surplu (more)s to requirement. It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

Heidolph Hei-FLOW Core 120 Peristaltic Pump This peristaltic pump is ideal for the simple conveying  (more)of all media. The pump drive of this model makes it possible to switch between a single channel and multi-channel pump head. By simply flipping the switch, it can also be conveyed in an anti-clockwise direction.Depending on the adapted pump head, a flow rate of 0.83 - 861 ml/min for the single-channel and 0.005 - 364 ml/min for the multi-channel pump head is guaranteed. The Core 120 conveys with a control accuracy of ± 5% at a speed range of 10 - 120 rpm. Click Here to View Product Video INCLUDED: The Heidolph Hei-FLOW Core 120 Peristaltic Pump includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Edwards nEXT85H NW40 NW16 80W Turbomolecular Vacuum Pump Ultimate Vacuum <5x10-9 mbar Inlet Conne (more)ction NW40 Pumping Speed Nominal 2,820.00 l/min Features - Combines oil-lubricated ceramic and dry permanent magnetic bearings for enhanced durability - Built-in electronics for streamlined operation and easy integration with control systems - Enhances speed and compression efficiency for a wide range of applications - Allows for in-field replacement of oil cartridges and bearings with minimal tools - Offers standard, high light gas compression, and additional regenerative stage options for specific needs - Provides superior compression performance for various gases - Ensures efficient operation with reduced electrical interference - Magnetic bearings reduce noise and vibration, ensuring a stable vacuum environment The nEXT 85H pumps consist of the turbomolecular pump with a permanently attached controller containing drive electronics. The controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT-85 H pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller. nEXT 85H pumps are supllied with an inlet-screen fitted into the centering O-ring for ISO version pumps and into envelope for CF version pumps. nEXT85 pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump. The nEXT 85 H pumps have a vent-port for venting the pump and vacuum system to atmospheric pressure. The pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller. The nEXT pumps have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply. Click Here to View Product Video INCLUDED: The Edwards nEXT85H NW40 NW16 80W Turbomolecular Vacuum Pump includes: - Operator's Manual - 1 Year Manufacturer's Warranty

Ultimate Vacuum 1x10-3 mbar Inlet Connection NW25 Displacement 25.0 m 3h-1 / 14.7 ft 3min-1 Features (more) - High ultimate vacuum and rapid pumping speed make it the industry standard for laboratory and light industrial applications - Quiet operation ensures a comfortable working environment, reducing noise in sensitive areas - Freestanding design with a flexible coupling driven by either a single-phase or three-phase (four pole) air-cooled motor for versatile use - Supplied with essential accessories, including 2 x 1 liter of Ultragrade 19 oil, O-ring and centering ring, two Allen keys, and spare seals for oil drain and filter plugs - Features a pressurized oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces for reliable performance - Includes an oil distribution valve to prevent oil discharge to the pump interior after stopping, enhancing safety - Airtight pumping chambers prevent suckback unless the gas ballast valve is open, maintaining system integrity - Facilitates easy oil changes with an oil drain-plug for gravity or pressure oil drainage Edwards E2M18FX Vacuum Pump 115/230V The EM range of oil sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single phase or three phase (four pole) air cooled motor. Each EM pump is supplied with 2 x 1 litre of Ultragrade 19 oil, O ring and centering ring, two Allen keys and spares seal for oil drain and filter plugs. For PFPE prepared FX pumps Fomblin® to be ordered separately. This is a single stage oil sealed rotary vane pump which has a pressurised oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior after the pump stops. The pumping chambers are air-tight, so this arrangement also prevents suckback unless the gas ballast valve is open. You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow either gravity oil drain or pressure oil drain. Click Here to View Product Video INCLUDED: The Edwards E2M18FX Vacuum Pump 115/230V includes: - O ring and centering ring - Two Allen keys and spares seal for oil drain and filter plugs - Operator's Manual - 1 Year Manufacturer's Warranty

Manufacturer: Thermo Scientific / Revco Model: ULT185-5-V Benchtop Ultra Low Freezer P/N: ULT185-5-V (more) Description:   Air-cooled refrigeration systems are engineered to maintain design temperatures in warm 32°C (90°F) ambient conditions Solid-state control system with adjustable temperature setpoint Digital temperature display resolution to 1°C Cabinet Construction Compact 25.2" x 30.7 in. (640 mm x 781 mm) footprint Industrial-grade hermetically sealed refrigeration compressors All-steel cabinet with high-impact epoxy finish for easy cleaning 4 in. (102 mm) foamed-in-place, CFC-free urethane insulation to protect product against high ambient conditions Heavy-duty counterbalanced lid with key lock Thermal interior sublid Control System   Solid-state control system with adjustable temperature setpoint Digital temperature display resolution to 1°C Push button setpoint display Key operated main power switch Alarm System Integrated preset overtemperature safety alarm with battery back-up and audible warning of temperature deviation Exterior alarm contacts for connection to remote monitoring system Specifications: 2ml Vial Capacity per Freezer: 1600 Access Security: key lock  Capacity : 28 L Display: Push Button LED Dimensions (LxWxH) Exterior: 64.8 x 78.1 x 50.8 cm Dimensions (DxWxH) Interior: 30.5 x 38.7 x 24.5 cm Mains: 230V 50 Hz (12A) Holds: 16 Boxes Insulation: Polyurethane Foam Shipping Weight: 86 kg Temperature Range: -50° to -80°C  Type: Ultra Low Freezer, Benchtop   Interior: painted steel Items delivered: - Thermo Scientific Revco ULT185-5-V Benchtop Ultra Low Freezer -80C 28L - Instruction Manual - Power Cord The laboratory freezer fully functional tested. Great cosmetic and technical condition.

Weighing range: 820 g/ 4200 g Readability: 0.01 g/ 0.1 g Repeatability: 0.01 g/ 0.1 g Linearity: ±0. (more)08 g Settling time: 1.5 s Calibration: Internal (automatic/FACT) Dimensions weighing platform (WxD): 200 mm x 170 mm Dimensions (HxWxD): 99 mm x 194 mm x 347 mm Weight: 4.6 kg

Labconco CentriVap Benchtop Concentrator with Heat Boost Eliminates bumping and foaming, maximiz (more)es trace solute recovery Microprocessor-controlled 300w heater covers ambient to 100C in 1° increments Optional Heat Boost™ surrounds chamber with extra controlled heat at programmed temperature, in closer proximity to sample Electrical receptacle included for an accessory vacuum pump (available separately) Vacuum delay prevents bumping by allowing rotor to achieve speed before applying vacuum Quick-Start™ button starts rotor, heater, timers and pump Quick-Stop™ system stops pump, opens vacuum release valve and stops rotor in seconds after time expires or RUN/STOP button is pressed Memory stores nine user programs (temperature/heat time/run time); LCD shows operating parameters and programs Compact, low-profile design Choice of removable acrylic lid with large, durable lid seal, or glass lid for use with solvents that attack acrylics Safety latch locks lid when rotor is turning, prevents start-up when lid is open Corrosion-resistant sample chamber has epoxy finish for easy cleaning and decontamination Microprocessor-controlled brushless motor runs at up to 1725rpm Stacks on top of cold trap to save space With 0.5 in. O.D. vacuum tube fitting INCLUDED: The Labconco 7810012 CentriVap Benchtop Concentrator with Heat Boost, 115V, 50/60Hz includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Eppendorf 12 x 9ml Adapters, Cat. # 5804792009 The Eppendorf 12 x 9ml Adapters, Cat. # 5804792009 ar (more)e for use with the Eppendorf S-4-72 Swing Bucket Rotor for the Eppendorf 5804/R and 5810/R Centrifuges. These adapters feature a capacity for 12 x 9ml round bottom tubes each with the maximum tube dimensions (Diameter x Height) of 17.5mm x 113mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 12 x 9ml Adapters, Cat. # 5804792009 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 12 x 9ml Adapters, Cat. # 5804792009 SpecificationsBottom ShapeRoundRotor CompatibilityEppendorf S-4-72 Swing Bucket Rotor