Edwards E2M18 Vacuum Pump, Cat. #: A36324904

This Boost-A- Break Break Tank & Pump Set with Type AB Air Gap BTABV 22S500 was removed from a u (more)niversity lab where it was surplus to requirements. The unit is in good cosmetic condition but has not been tested. Tank inside dimensions - 40 x 21 x 40cm

VACUUBRAND ME 16 NT Diaphragm Pump Ultimate Vacuum 70 mbar Max. pumping speed at 60 Hz 9.6 cfm Num (more)ber of Heads/Stages 8/1 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Whisper quiet - Very low vibration - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs Diaphragm pumps are an excellent solution for continuous, oil-free evacuation and pumping of gases. The one-stage design provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar. All parts in contact with pumped media are made of aluminum and selected plastics allowing a wide range of applications for non-corrosive gases. The highly flexible, fabric-reinforced double diaphragms made of FKM are ideal for extended operating life. These pumps are particularly powerful and offer large volume flow. The eight-cylinder pump ME 16 NT features exceptionally high pumping speed, low vibration and a very compact design with smooth and easy-to-clean surfaces. Large one-stage diaphragm pumps are an excellent choice for continuous, oil-free pumping of large amounts of gases. Typical applications are vacuum ovens and in general evacuation and pumping of non-corrosive gases. They are also excellent for very fast evacuations down to modest vacuum levels.INCLUDED: The VACUUBRAND ME 16 NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards nEXT85H NW40 NW16 80W Turbomolecular Vacuum Pump Ultimate Vacuum <5x10-9 mbar Inlet Conne (more)ction NW40 Pumping Speed Nominal 2,820.00 l/min Features - Combines oil-lubricated ceramic and dry permanent magnetic bearings for enhanced durability - Built-in electronics for streamlined operation and easy integration with control systems - Enhances speed and compression efficiency for a wide range of applications - Allows for in-field replacement of oil cartridges and bearings with minimal tools - Offers standard, high light gas compression, and additional regenerative stage options for specific needs - Provides superior compression performance for various gases - Ensures efficient operation with reduced electrical interference - Magnetic bearings reduce noise and vibration, ensuring a stable vacuum environment The nEXT 85H pumps consist of the turbomolecular pump with a permanently attached controller containing drive electronics. The controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT-85 H pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller. nEXT 85H pumps are supllied with an inlet-screen fitted into the centering O-ring for ISO version pumps and into envelope for CF version pumps. nEXT85 pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump. The nEXT 85 H pumps have a vent-port for venting the pump and vacuum system to atmospheric pressure. The pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller. The nEXT pumps have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply. Click Here to View Product Video INCLUDED: The Edwards nEXT85H NW40 NW16 80W Turbomolecular Vacuum Pump includes: - Operator's Manual - 1 Year Manufacturer's Warranty

Edwards nEXT240T HC - ISO100 160W Turbomolecular Pump Ultimate Vacuum <6x10-8 mbar Inlet Connecti (more)on DN100CF Pumping Speed Nominal 0.240 m³/s Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for improved performance - Offers direct I/O or serial control; compatible with TAG and TIC controllers for system integration - Oil cartridge and bearings can be replaced in the field with minimal tools - Features multiple drag stages for enhanced compression ratios and increased backing pressure tolerance - Suitable for a variety of demanding applications including high-energy physics, electron microscopy and industrial development - Features a patented bearing suspension system to reduce noise and vibration transmission to the vacuum system - Includes a purge port for safe operation with specialized gases - The permanent magnet upper bearing ensures a hydrocarbon-free environment, reducing contamination The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.INCLUDED: The Edwards nEXT240T HC - ISO100 160W Turbomolecular Pump includes: - One Year Manufacturer's Warranty

suitable for 13, 14, 16, 25, 17 & 18 tubing

BBL GasPak 100 anaerobiosis jar. Capacity 2.5 L jar. Vented lid with ''O'' ring gasket, a clamp/thum (more)bscrew assembly, a catalyst reaction chamber, two catalyst charges, one 12-place dish rack for 100 x 15 mm dishes, and one 13-place, 13 mm tube holder.

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Scilogex Universal Platform for 7.5KG Linear/Orbital Shaker The Scilogex Universal Platform (12 x 12 (more) in) for 7.5kg linear & orbital shaker is for use with various types of flasks/vessels. Includes 4 horizontal adjustment clamping bars. INCLUDED: The Scilogex Universal Platform for 7.5KG Linear/Orbital Shaker includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA C-MAG HP 10 Hot Plate Heating Temp. Range 50°C to 500°C Volume Max. 15 l Setup Plate Material Ce (more)ramic Features - Fixed safety circuit of 550 °C - Hot Top indicator >hot surface warning to prevent burns!! - Exact temperature setting via digital display (LED) - Bushing according to DIN 12878 for connecting a contact thermometer, e.g. ETS-D5, enables precise temperature control - Digital error code display - Elevated control panel for protection against leaking liquids The IKA C-MAG HP 10 Hot Plate features a ceramic glass surface offering excellent chemical resistance and is equipped with a fixed safety circuit of 550 °C and a Hot Top indicator to prevent burns. It allows precise temperature control from 50 to 500 °C via a digital LED display and a turning knob, with a set temperature resolution of 10 ±K. The hotplate supports volumes up to 15 liters and has a heat output of 1500 W with a heating rate of 5 K/min. It includes a bushing for connecting an external thermometer like the ETS-D5 for precise temperature management. Additional features include a digital error code display and an elevated control panel for protection against leaks. The unit measures 300 x 105 x 415 mm, weighs 6 kg, and operates within a permissible ambient temperature range of 5 - 40 °C.