Edwards E2M1.5 Vacuum Pump, 230V

The N 840.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automatic conde (more)nsate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products. The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications. When the humid gases are sucked in, it can happen that condensation forms in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow Rate (max.) 34 l / min Ultimate Vacuum (max.) 10 mbar (abs.) Pressure (max.) 1 bar (rel.) Permissible Medium Temperature 5-40°C Valve Material FFPM Diaphragm Material PTFE coated Pump Head Material PTFE Applications Rotary evaporation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Agilent HS 602 Rotary Vane Vacuum Pump This item was removed from a university laboratory where it w (more)as surplus to requirements. The vacuum pump powers on, with the status light changing from red to green as the pump speed increases. It operates smoothly, with no unexpected noises or vibrations. Includes: - Oil Exhaust Filter NW25 Model: 749-9365R002Serial No.: IT1328A241

Heidolph Rotavac Valve Control Vacuum Pump Ultimate Vacuum 7 mBar Suction Capacity 2 m³/h Nominal R (more)otation Speed 1,800 RPM Features - Suction capacity for up to three rotary evaporators at the same time - Vacuum can be controlled through valves or manual vacuum controllers - Depending on your application, you can use the Switchbox to turn the vacuum pump on and off - A vacuum valve is required to combine this vacuum pump with Hei-VAP Expert Control/Ultimate Control rotary evaporators All components that come in contact with media are made from chemically resistant fluoropolymer. The durable PTFE design guarantees a superior diaphragm lifespan. Head cover and clamping disc have a stable core made from metal that offers unsurpassed long-term performance. The direct pump drive (without belt) has no wear parts, is exceptionally quiet and creates a very low vibration environment. The physically optimized gas ballast valve prevents from condensate collecting in the pump. Condenser is not in scope of delivery.INCLUDED: The Heidolph Rotavac Valve Control Vacuum Pump includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Heidolph Rotavac Vario Control, 115VEven if the gas ballast valve is open an excellent ultimate vac (more)uum is reached when working with easily condensable vapors. This makes distilling high boiling point solvents such as DMF or DMSO possible at low bath temperatures. For use with Hei-VAP Expert Control / Hei-VAP Ultimate Control. Condenser is not in scope of delivery. Features: - Highest distillation rates possible and reducingprocess time by 30% - Solvent recovery of up to 99% - Once the required vacuum is reached, thepump automatically stops and reliably keepsthe vacuum at the desired level - Minimized runtime saves energy andsignificantly increases the lifespan of thediaphragm - These pumps guarantee minimum noise andvibrations during operation - Rpm-regulated pumps achieve the mostprecise vacuum INCLUDED: The Heidolph Rotavac Vario Control, 115V includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

VACUUBRAND ME 8C NT Chemistry Diaphragm Pump Ultimate Vacuum 70 mbar Max. pumping speed at 60 Hz 4 (more).6 cfm Number of Heads/Stages 4/1 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Compact design - Whisper quiet and very low vibration - Long diaphragm life, maintenance-free drive system Chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The one-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar. All major parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms for increased reliability and extended operating life. These large pumps have an exceptionally high pumping speed. The NT-series features further improved performance data and superior vapor tolerance. Large one-stage chemistry-design diaphragm pumps are an excellent choice for pumping large amounts of gases and vapors. They do not consume water and therefore do not produce any contaminated waste water. Typical applications are degassing of liquids, multiport filtrations e. g. on vacuum networks and in general evaporation of low boiling solvents. We recommend these pumps especially for processes with large gas flow at high process pressures.INCLUDED: The VACUUBRAND ME 8C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Axon Instruments Axopatch 200B Integrating Patch Clamp Lab This item was removed from a university w (more)here it was surplus to requirement. It is in good cosmetic condition and powered up, we are unable to conduct further testing at our facility.

This listing is for a Thermo Scientific FiberLite F14-6x250y Centrifuge Rotor. The unit is in full  (more)working condition and is ready for immediate release. The Thermo Scientific FiberLite F14-6x250y Centrifuge Rotor is a robust and highly functional component designed for a variety of laboratory applications. Here is a comprehensive overview of its key features, specifications, and benefits: Key Features and Specifications Capacity: Accommodates 6 tubes with a volume of 250 mL each Maximum Speed: 10,000 rpm (up to 14,000 rpm for compatible centrifuge models) Maximum RCF: 15,316 x g (up to 30,100 x g for some compatible models) Rotor Angle: Fixed angle of 23° K Factor: 2737 Maximum Tube Dimensions: Length: Up to 125 mm Diameter: Up to 62 mm Radius (Metric): Minimum radius of 3.7 cm Biocontainment: Yes, designed for safe handling of samples Key Benefits Lightweight and Innovative Construction: Made from carbon fibre, allowing for rotor designs that are not feasible with traditional metal technologies. Durability: Corrosion and fatigue-resistant materials ensure the structural integrity of the rotor, promoting long-term reliability. Long Warranty: Backed by a 15-year warranty, providing confidence in the product’s quality and performance. Auto-Lock Rotor Exchange: Features a secure, push-button rotor exchange mechanism that allows for quick swapping of rotors in less than three seconds, streamlining the workflow in the laboratory. This centrifuge rotor is tailored for both research and clinical settings, offering unique advantages that enhance user experience and operational efficiency while delivering reliable performance.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Angular rotor for centrifuge F45-36-8 EPPENDORF New equipment in its original packaging The Eppendor (more)f F-45-36-8 fixed angle rotor is intended for use in the Eppendorf 5415D and 5415R centrifuges. Reference: F45-36-8 13200 rpm 36X0.5ml 16.110 x g With lid

Precision in PRO version The CY10 series precision balance is designed for fast, accurate and repeat (more)able weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 series precision balance: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Precision balance and labelling scale in one device If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series precision balance can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.