Edwards E1M18 Vacuum Pump

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Edwards Speedivac 2 Vacuum Pump was removed from a university lab where it was surplus to requi (more)rements. The pump has been professionally serviced and is in good working order. It performs to 2 x 10-1 The item is in good cosmetic condition but has marks and stains from use.

Boost-A- Break Break Tank & Pump Set with Type AB Air Gap BTAB 700. This item was removed from a (more) university where it was surplus to requirement. It is in good cosmetic condition and powers up, when powered up the fault light illuminates immediately, due to this we have listed this item as Spares/Repairs. Fitted with Calpeda MXH 203E Pump.

KNF UN820.3FT.40P IP44-T Diaphragm Pump Ultimate Vacuum 10.7 mbar (abs.) Maximum Flow Rate 20L/min  (more)(1.2 m3/h) Protection Class IP44 Features - Clean, 100% oil-free operation - Corrosion-resistant PTFE/FFPM flowpath - Ideal for extremely aggressive/corrosive gases and vapors - Compact, quiet and reliable - Self-drying system removes condensate without affecting the vacuum level - Maintenance-free The chemically-resistant series N820.3FT.40P diaphragm pump is a two-stge unit with an integrated PowerDry self-drying system. There is a wide range of applications for this pump in laboratories, especially whenever clean vacuum is required and moist gases must be pumped down. Examples include vacuum-drying of vacuum oven chambers (for drying or heat-treating substances and components) or steam sterilizers for sterilizing instruments, vessels, filters and textiles. Due to its high resistance to aggressive media, this pump can be used universally. The heart of these very compact pumps are KNF structured diaphragms (PTFE-coated). These patented diaphragms were stress-optimized using the Finite Elements method. As a result, we were able to make the pumps smaller while increasing the service life of the diaphragm. This pump is 115V.

KNF LABOPORT N 820 G Diaphragm Pump Ultimate Vacuum 6 mbar Maximum Flow Rate 20L/min (1.2 m3/h) Pro (more)tection Class IP30 Features - 100% oil-free transfer – thereby pure transferring, evacuation and compression of gases - High level of vapor and condensate compatibility - Ideal for extremely aggressive/corrosive gases and vapors - ATEX compliant according to II 2/-G IIB+H2 T3 internal atmosphere only - Integrated gas ballast valve - Separators and/or condensers can be purchased individually at any time and easily fitted, enabling users to build their own customized vacuum system - 3-color status display for in operation, stand-by, and error - Integrated rotational speed control - Environmentally friendly - Start against ultimate vacuum of the pump The KNF LABOPORT N 820 G Diaphragm Pump is an exceptional choice for laboratory applications, boasting a chemically resistant, compact design. This oil-free pump ensures pure transferring, evacuation, and compression of gases, thanks to its 100% oil-free operation. It is especially suitable for handling extremely aggressive or corrosive gases and vapors, highlighting its high vapor and condensate compatibility. The pump features manual speed control, allowing users to tailor the pump capacity to specific needs, and an integrated gas ballast valve for enhanced performance. Constructed with PTFE/TFM heads, PTFE-coated diaphragms, and FFPM valves, it ensures durability and reliability in demanding environments. Additionally, the pump is ATEX compliant for internal atmospheres, ensuring safety in hazardous conditions. It offers the flexibility to add separators and/or condensers individually, allowing users to customize their vacuum systems. The 3-color status display indicates operation, stand-by, and error modes, while the integrated rotational speed control adds to its user-friendliness. The pump's ability to start against the ultimate vacuum and its environmentally friendly design further enhance its appeal for a wide range of laboratory applications. INCLUDED: The KNF LABOPORT N 820 G Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards nXDS10iC Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases a (more)nd bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. The Edwards nXDS10iC features Chemraz internal valves and stainlesssteel fittings for extra protection from the pumped media. The ‘C’ series isbetter designed for more aggressive applications as opposed to the standardseries. Click Here to View Product Video INCLUDED: The Edwards nXDS10iC Dry Scroll Pump includes: - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

Casela London Folding Mirror Stereoscope & Accessories This was removed from a university lab wh (more)ere it was surplus to requirements. The unit is in good cosmetic condition but is missing both eyepieces. There is a piece of equipment with it labelled Casela 916. We are unsure of its function or relation to the stereoscope. It is supplied with the manual.

F1 Mass Standard - knob weights with adjustment chamber. Nominal value - 10 kg.

IKA R 2311 Paddle Stirrer Tangential flow, minimum turbulence, good heat exchange, gentle treatment (more) of product. Used at low to medium speeds.Stirrer Ø: 150 mmShaft Ø: 13 mmShaft length: 800 mm INCLUDED: The IKA R 2311 Paddle Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

IKA Dry Block Heater 1 Dry block heater, 1 block Number of Blocks 1 Block Heating Temp. Range Room T (more)emp. +5°C to 120°C Setup Plate Material Aluminum Features - Stepless adjustable temperature up to 120 °C - Timer: Countdown, adjustable from 1 min to 99h 59min - Counter: Display of heating time - Highly versatile with a large number of blocks - Error code display - Fixed safety circuit - Acoustic signal at end of test Digital block heater for three aluminum blocks provides precise temperature control in small vessels. Included PT-1000 temperature sensor allows temperature control directly in the sample vessel. It is used with PCR tubes, PCR strips, Greiner tubes, microplates and cuvettes. The block heater is ideal for melting and boiling point determination, enzyme reactions, incubation and activation of cultures, immunoassays, DNA denaturation, culture media test, coagulation test, blood-urea-nitrogen determination and in situ hybridizations.INCLUDED: The IKA Dry Block Heater 1 Dry block heater, 1 block includes: - Dry Block Heater 1 - Block remove tool - PT 1000.60 Temperature sensor, stainless steel - Two Year Manufacturer's Warranty