DVP Technologies Oil Bath Vane Vacuum Pump RD2D

This Busch Type- SV 1003 A000 Vacuum Pump was removed from a university lab where it was surplus to  (more)requirements. The unit is in reasonably good cosmetic condition with some marks from use. It has not been tested as we do not have the correct power adapter for it.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

AZURA preparative HPLC pump P 2.1L covers wide flow rate range and pressure capabilities. It has bee (more)n designed for purification of mg and gram samples. The Mobile Control allows intuitive control in stand-alone operation. The integrated automatic recognition of the pump head with RFID technology allows fast adaptions of the pump for various applications. Preparative pump offers wide range of flow rates (0.1-1000 ml/min) Choice of different LC software platforms Improved electronic drive compensation Integrated compressibility compensation Integrated leak management Constant pressure operation mode Solvent delivery Pump type: Preparative HPLC pump Delivery system: double piston pump with Al²O³ pistons Pump head: 250 ml/min Pump head materials: titanium Pressure sensor materials: PEEK (Polyether ether ketone) Maximum delivery pressure: 22.5 MPa (225 bar, 3260 psi) up to 100 ml/min, 20 MPa (200 bar, 2900 psi) at 250 ml/min Flow rate range: 0.1-250 ml/min, 0.5-200 ml/min (recommended) Flow rate increment: 0.01 ml/min Flow rate accuracy: ± 2 %, measured at 5 – 50 % of flow range using ethanol/water 10:90 Flow rate precision: < 0.2 % RSD Gradient support: isocratic, upgradeable to a binary HPG system with additionalpump P 2.1L or to a binary orternary LPG system HPG: gradient accuracy: ± 2 % (5 – 95 %, measured at 5 – 50 % of flow range, water/caffeine tracer) HPG: gradient precision: 1 % RSD, based on retention time at constant room temperature LPG: gradient accuracy:  ± 3 % (5 – 95 %, measured at 5 – 50 % of the flow range, water/caffeine tracer) LPG: gradient precision: 2 % RSD, based on retention time at constant room System protection: soft start, Pmin and Pmax are programmable Wetted materials: titanium,stainless steel, graphite fiber reinforced PTFE, FKM, PEEK, sapphire, aluminum oxide (Al²O³) Ambient conditions: temperature range: 10–40 °C; 50–104 °F, air humidity: below 90 % humidity (non condensing) Leak sensor: Yes Communication Control: LAN; RS-232; analog and event controlled Analog inputs: 0-10 V Analog control input: flow rate Level/event outputs: 8 event outputs (TTL, OC, relays) Programming: 19 programs + 9 links (to programs) + 1 wake up program Special features: system pump head is detected automatically using radio frequency identification (RFID) General Power supply: voltage range: 100 – 240 V, 50 – 60 Hz Dimensions: 361 x 208.2 x 523 mm (W x H x D) Weight: 19 kg

Double-headed, chemically resistant, dry-running diaphragm pumps for a wide range of laboratory appl (more)ications. For conveying and evacuating, without affecting the media. • 100% oil-free transfer, so that the media cannot be contaminated during pumping, evacuating or compressing • Very suitable for vapours and condensates • Suitable for slightly aggressive and corrosive gases and vapours • Maintenance-free, environmentally friendly • Flow rate: 34 L/min (at atmospheric pressure) • Working pressure: 1.0 bar • Final pressure (abs): 8 mbar Dimensions (DxHxW): 341 x 226 x 166 mm Weight: 12 kg

Leybold Vakuum GMBH Trivac 016B Pump This item was removed from a university lab where it was surplu (more)s to requirement. It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

Edwards nXDS20iC Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases a (more)nd bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. The Edwards nXDS20iC features Chemraz internal valves and stainlesssteel fittings for extra protection from the pumped media. The ‘C’ series isbetter designed for more aggressive applications as opposed to the standardseries. Click Here to View Product Video INCLUDED: The Edwards nXDS20iC Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards nXDS20iC Dry Scroll Pump Technical SpecificationsNominal rotational speed1800 rpmDisplacement28.0 m3h-1 / 16.5 ft3min-1Peak pumping speed22.0 m3h-1 / 13.0 ft3min-1Ultimate vacuum (total pressure)0.030 mbar / 0.022 TorrMinimum standby rotational speed1200 rpmSpeed control resolution (percentage of full rotation speed)1%Pumping speed at minimum rotational speed10Maximum continuous inlet pressure50 mbarMotor power 1-ph260 WPower connector 1-phIEC EN60320 C13Recommended fuse10A, 250Vac rmsWeight25.6 kg / 56 lbInlet flangeNW25Exhaust flangeNW25Noise level52 dB(A)Vibration at inlet flange&lt; 4.5 mms-1 (rms)Leak tightness (static)&lt; 1x10-6 mbar ls-1Operating temperature range10 to 40 °C / 41 to 104 °FElectrical Supply115/230VComparison of ModelsParameterEdwards nXDS6iCEdwards nXDS10iCEdwards nXDS15iCEdwards nXDS20iCNominal rotational speed (rpm)1800180018001800Displacement (m³h⁻¹ / ft³min⁻¹)6.2 / 3.612.7 / 7.517.1 / 10.128.0 / 16.5Peak pumping speed (m³h⁻¹ / ft³min⁻¹)6.2 / 3.611.4 / 6.715.1 / 8.922.0 / 13.0Ultimate vacuum (total pressure) (mbar / Torr)0.020 / 0.0150.007 / 0.0050.007 / 0.0050.030 / 0.022Weight (kg / lb)26.2 / 5825.8 / 5725.2 / 5625.6 / 56Inlet flangeNW25NW25NW25NW25Noise level (dB(A))52525252Operating temperature range (°C / °F)10 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 104Electrical Supply115/230V115/230V115/230V115/230V.comparison-table tr td:nth-child(5) { background-color: #fffacd; }

SCHOTT 10ml TZ 1210 syringe for titrator Reference: 312

Refurbished Hettich Universal 320 R, refrigerated Centrifuge. Great condition - great price. 6 month (more)s warranty. Includes: - Hettich 320 R refrigerated centrifuge - Swing-out rotor Hettich 1624 - 4 round buckets Hettich 1481

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Yamato SN-500C Sterilizer without Dryer 47L, 100-120V Operating Temperature Range 45°C to 135°C Tim (more)er 0 min. to 99 hrs and 59 min. Internal Capacity 47L Features - Maximum sterilizing temperature goes up to 135°C suitable for protein modification - By simple setting and operation, these sterilizers manage ordinary sterilization, sterilization of culture media and liquids, and melting of culture media - Custom programs can be saved for repeated use - Standard equipped with timer start and pre-heating features for efficient use of time and cooling fan to shorten cool down time - Mobile on wheels - Lid interlock mechanism - Drain bottle unset alarm - Memory malfunction - Automatic shutdown when malfunction - Self-diagnostic functions High performance, easy operation and ergonomically designed 47L standard steam sterilizer featuring easy top loading and handling of samples. Maximum sterilizing temperature goes up to 135°C suitable for protein modification. By simple setting and operation, this sterilizer manages ordinary sterilization, sterilization of culture mediums and liquids, and melting of culture mediums. Custom programs can be saved for repeated use. Standard equipped with timer start and pre-heating features for efficient use of time and cooling fan to shorten cool down time. Mobile on wheels. Operating temp. range 45 to 135°C. INCLUDED: The Yamato SN-500C Sterilizer without Dryer 47L, 100-120V includes: - 3 pcs. stainless steel mesh basket - Vapor Cup x 1, Drain Bottle x 1, Drain Board x 1, 1 Set of Chemical Indiciators, Filter x 1 - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The roller scale is designed for weighing heavy, large-size packages such as pallets or crates. It a (more)llows for final product mass control before it enters the warehouse or is transported to the customer. Depending on the application, the scale can be made in a powder-coated version, dedicated for use in warehouses, or in a stainless-steel version, intended for use in wet environments. Operation Ergonomics The scale has a large 10-inch touch screen, which is comfortable and intuitive to use. Operation of the roller scales does not require additional training, as the software of all RADWAG checkweighers is unified. Select an Interface That Your Production Line Supports RADWAG roller scales offer the option of using one of four industrial interfaces, depending on your requirements. All our interfaces allow you to: start and stop the dynamic weighing procedure remotely (Start and Stop function), enter the batch number (Batch Number Readout function), select a product (Select Product During Standstill function). Do You Want Your Scale to Work With a Barcode Scanner? Our roller scales are compatible with barcode scanners: 1D and 2D, manual and automatic. Data contained in one-dimensional (bar) barcodes can be read using 1D scanners. 2D scanners, on the other hand, can read 2D codes, which are large amounts of data encoded in images composed of black and white squares. You can use our scales if you have a manual or automatic scanner mounted above your production line. Roller Scale and Printer &ndash; The Perfect Combination Do you use a RADWAG roller scale but not a printer? You have no idea what you are losing. You can easily print a ready report (e.g. statistical or PGC) at any time thanks to the direct connection between the scale and a printer. Do you require product parameters or information on a specific operator? Just select, press &ldquo;print&rdquo;, and you&rsquo;re done. The automatic printout function allows you to receive an automatic frame, i.e. information sent to your computer or printer, immediately after weighing. What does this mean for you? Possibility of recording weighings in real time. You can customise the automatic frame based on your preferences. What do you need? Mass? Product code? Date? You got it. Weigh the Product and Print the Label Do you print labels to identify products in your company? If so, you understand how time-consuming and tedious your work would be without a label printer. We have some exciting news for you: RADWAG roller scales are compatible with label printers. Our product range includes a label printer that can print thermal and thermal-transfer (paper, foil) self-adhesive labels. The printer communicates with the roller scale via Ethernet or RS 232. Capability to Record Measurements The local SQL database system and integration with the multifunctional server software E2R Checkweigher allow measurements to be recorded and processed. Does Your Line Require Special Control Algorithms? The RADWAG roller scales software allows you to adjust the scale operation to the specific requirements of your line. Approval The scale is MID approved. Custom Designs The scale can also operate in feeder mode by controlling the feeding valves.

Mild steel powder coated weighing platform We provide you with mild steel powder coated weighing pla (more)tforms with readability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms have a square shape of 300 x 300 mm or a rectangular shape of 400 x 500 mm or 500 x 700 mm. Use the potential Our platforms can work with one of eight weighing terminals to choose from: PUE CY10, PUE H315, PUE C315, PUE C32, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. Power of steel The use of stainless steel for the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing. The frame is made of mild steel. Mild steel powder coated weighing platforms are marked by a high degree of protection IP 65.