Buchi V-700 Diaphragm Vacuum Pump Lab

Technical features Flow rate 0.5–3.0 l/min Suction (max.) 3 mWg Operating pressure (max.) 1 bar (rel (more).) Permitted fluid temperature 5-80°C Maximum permissible viscosity 150 cSt FFKM valve material Membrane material PTFE coating Pump head material PTFE, PP, PVDF Applications Transfer of liquids Qualitative characteristics Small footprint Simple and intuitive use Manual control Self-priming, it can run dry Splash-proof with IP65 protection rating Available with different material configurations for chemical resistance Maintenance free Pump head materials: PP, PVDF, PTFE Membrane material: PTFE coating Valve material: FFKM Simriz® VERSIONS S (standard): the flow rate can only be set manually, using the knob on the upper side, as shown in the photo. RC (remote control): the range can be controlled remotely, such as from a PC, including a fault alarm; a connection cable will be supplied. Supplied with fittings for 12 mm internal diameter tube. Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This KNF Neuberger Laboport Diaphragm Pump Type - N840.3 FT.18 was removed from a university la (more)b where it was surplus to requirements. The unit powers up and is in good working order. It is in reasonably good cosmetic condition with some marks from use.

This Gilson HPLC system was removed from a university lab where it was surplus to requirements. All  (more)the units power up but have not been tested further at our facility. Included are; 1 x Gilson Aspec XL4 Solid Phase Extraction 1 x Gilson 404 Syringe Pump 1 x Gilson 118 UV/VIS Detector 1 x Gilson 305 Pump 1 x Gilson 305 Pump 1 x Gilson 805 Manometric ModuleConnects to 305 pump 1 x Gilson 811C Dynamic Mixer 1 x Gilson System Interface Model 3 x Gilson cases with small accessories Box of cables

KNF UN842.3FT.40P IP44-T Diaphragm Pump Ultimate Vacuum 4 mbar (abs.) Maximum Flow Rate 34L/min (2. (more)04 m3/h) Protection Class IP44 Features - Pure transfer, evacuation and compression - Highly compatible with vapors and condensation - Chemically resistant flowpath - Suitable for highly aggressive or corrosive gases and vapors - Environmentally friendly - Maintenance-free The KNF UN842.3FT.40P IP44-T Diaphragm Pump features an integrated KNF self-drying system. Designed for a wide range of applications in laboratories, including vacuum drying of chambers (for drying or heat-treating substances and components) or steam sterilizers for sterilizing instruments, vessels, filters and textiles. The KNF UN842.3FT.40P IP44-T Diaphragm Pump can be used very universally due to its high resistance to aggressive media. The KNF self-drying system allows condensed liquid to be blown out of the pump heads at a high speed during evacuation. The drying cycle can be adjusted to the requirements of the individual process using three variables. The KNF UN842.3FT.40P IP44-T Diaphragm Pump is chemical-resistant, therefore suitable for highly aggressive or corrosive gasses and vapors. This pump is 115V. The KNF UN842.3FT.40P IP44-T Diaphragm Pump is brand new in box .INCLUDED: The KNF UN842.3FT.40P IP44-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

F2 Mass Standard - knob weights with adjustment chamber - set (1 g - 500 g), plastic box Number of p (more)ieces in the set: 12 weights 1 g i 2 g – solid masses without adjusting chamber

The terminals are intended to designing scales with maximum resolution of 6000 e. PUE 5 series, simi (more)larly to the basic model, are enclosed in a stainless steel housing which allows for reaching the highest IP rating, i.e. IP 67. The terminals come standard with interfaces: 2 × RS232, 1 × RS485, 1 x Ethernet, 4 x USB 2.0. PUE 5 series can be extended by additional 3 weighing modules for simultaneous operation of maximum 4 weighing platforms. Intended Use: The terminal PUE 5 series is a multifunctional weighing device. It combines the best features of a PC computer and a scale. The PUE 5 operates on basis of OS Windows, creating the best option for configuring the device to individual customer requirements through installing corresponding application. If applied with dosing or formula making systems, the PUE 5 allows for operation with multiple weighing platforms, and simultaneous dosing with full process control. A dosing or formula making system that is configured on basis of the terminal PUE 5 series does not require an additional PC computer. Database editing is possible from the level of PUE 5 touch screen display or an optional PC keyboard. Area of Use: Main applications for terminal PUE 5 series: Designing industrial load cell scales; Multiple weighing applications supervised by a computer system through Ethernet module; Possibility of connecting large quantity of additional weighing platforms to industrial terminals. Terminal type: PUE 5.15IR – infrared touch screen technology. IP67 protection class. Very high brightness and readability level. High resistance to moisture and dust. Very good mechanical resistance, operation in gloves enabled (material: latex, fabric or steel chain).

Ohaus 30314825 6 x 85ml Fixed Angle Rotor The Ohaus 30314825 6 x 85ml Fixed Angle Rotor accommodates (more) a capacity of up to 4 x 85ml. This rotor is designed for use with Ohaus FC5718, and FC5718R series centrifuges, and reaches speeds up to 13,000 RPM with a maximum RCF of 21,726 x g. INCLUDED: The Ohaus 30314825 6 x 85ml Fixed Angle Rotor includes: - Ohaus 30314825 6 x 85ml Fixed Angle Rotor - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Motic AE31E LED Trinocular Inverted Microscope Magnification Range 4x to 40x Optical System Colour C (more)orrected Infinity (CCIS) Illumination 3W LED Features - Professional inverted microscope providing the best image quality, ergonomic design, and clever illumination features - Ideal for all types of routine microbiology applications - Upgradable options like fluorescence are available within this microscope series - Light intensity adjustment with memory for each objective position - Fixed stage plate carries a glass or metal insert for quick overview and comfortable change of objectives - Coaxial coarse and fine focusing system with tension adjustment - Fine focus precision of 2 μm - Auto ON-OFF illumination function via built-in IR-sensor - Focusable and centerable swing-out ELWD Condenser - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) The AE31E is a refined inverted microscope with an extended focus on practical aspects and is Motic's new statement for a professional inverted microscope providing the best image quality, ergonomic design, and clever illumination features. This version of the Motic AE31E is an inverted microscope with a trinocular head and 4X, 10X and 20X objectives. The AE31E is the perfect platform for all kind of routine microbiology applications in clinical and pharmaceutical laboratories with the best options for university research environments. In full accordance with Motic’s CCIS Infinity System, the new LWD Plan Achromatic objectives with an intelligent Phase contrast concept deliver a remarkable image quality. Phase contrast is an integral part of all standard packages, while the optional 4X Phase objective is dedicated to fast screening. The AE31E stand carries an encoded 5-fold nosepiece with a light memory function. The illumination intensity for each objective position is memorized and replicated once the respective objective is swung in again. Rich illumination power is given by the 30 Watt Halogen light source in a Full-Koehler configuration, simply interchangeable with 3W LED modules of different color temperatures. All accessories from the BA series such as the C-mounts, additional eyepieces, etc. can be used without restriction on AE31 Elite. Upgradable options like fluorescence are available within this inverted microscope series. INCLUDED: The Motic AE31E LED Trinocular Inverted Microscope includes: - Widefield WF10x Eyepiece N-WF 10X / 22mm - Rubber Eyecups - Side Facing Quintuple Nosepiece - CCIS Plan Achromat PL4x Objective - CCIS Plan Achromat PL Ph10X, LWD PL Ph20X Phase Objectives - Phase Slider Ph0, BF, Ph1 - Centering Telescope & Keys - Plain Stage with Metal & Glass Inserts - 45mm Blue, Ground Glass and Green Interference Filters - ELWD Condenser N.A. 0.30 (WD = 72mm) with Filter Holder - Allen Hexagonal Key and Vinyl Dust Cover - Koehler Illumination 3W LED with Intensity Control - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty