Diaphragm pump Liquiport NF 300 KT.18 S KNF

Technical features Flow rate (max.) 6 l / min Final vacuum (max.) 100 mbar (abs.) Pressure (max.) 2. (more)4 bar (rel.) Permissible fluid temperature 5-40 ° C Valve material: FFPM Diaphragm material PTFE coated Pump head material: PPS Applications Filtration Aspiration of liquids Solid phase extraction Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant Compact, silent and reliable Ecological Maintenance free Download the data sheet for further information and accessories NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

The N 840.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automatic conde (more)nsate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products. The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications. When the humid gases are sucked in, it can happen that condensation forms in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow Rate (max.) 34 l / min Ultimate Vacuum (max.) 10 mbar (abs.) Pressure (max.) 1 bar (rel.) Permissible Medium Temperature 5-40°C Valve Material FFPM Diaphragm Material PTFE coated Pump Head Material PTFE Applications Rotary evaporation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

BUCHI Syncore Q-101 platform + KNF vacuum pump + V-850 vacuum controller Model: Büchi Analyst Q-101  (more)Vibration frequency: 0 - 300 min⁻¹ Heating power: 1500 W Temperature Range: Up to 100°C W×D: 480×487 mm Included: Rack R-12 Polyvap (120ml) A condensation unit and bottle A KNF vacuum pump A Buchi V-850 vacuum controller Traces of rust in the bottom of the heating element Equipment tested

EASY TO USE AND POWERFUL Velp's PW model, ideal for high viscosity samples, is an intuitive rod stir (more)rer, able to guarantee maximum safety and protection in case of overload and overheating. The special technopolymer structure and the IP 40 protection degree guarantee an excellent level of protection and chemical resistance. Easy to install, resistant and with small dimensions, PW is one of the lightest pole stirrers on the market. Nevertheless, it ensures a soft start and effective stirring even at maximum speed. The intuitive locking system is simple and convenient and requires no tools. PW accepts different rod models, for the most varied applications, with a maximum diameter of 10 mm. You will be able to use this model even in the most stressful operating conditions. The robust motor will guarantee you continuous operation over the years, without additional costs for maintenance. Available models: The stirring rods available: For added versatility, you can choose between different types of control, digital or analog. - Digital: set speed, actual speed, torque and timer at a glance. - Analog: power and precision at the most advantageous price. Simple keys, graphics and intuitive design; you'll already know how to use it the first time you turn it on. Peace of mind and safety in your laboratory with every Velp instrument. - Protection in case of overload and overheating - Intuitive temple closing system, without the use of special tools. Maximum rod diameter of 10 mm Compact and lightweight, small in size to make the most of your laboratory bench space. - Technopolymer structure - IP40 protection

Sample preparation stirrer OHAUS Guardian 7000 Magnetic Hotplate Stirrers are designed with exceptio (more)nal safety features and top performance for every application. All models feature the unique SafetyHeatTM, an industry-leading internal protection system that ensures safety in heating applications through dual system integrity monitoring. The bright LCD display features intuitive icons, temperature, speed and duration settings, all designed to monitor performance from every corner of the lab. Numerous cutting-edge Ohaus features: - SmartHousing ™: Innovative chemical resistant, easy to clean design that allows you to channel potential spilt liquid samples away from internal components and the glass control panel. - SmartPresence ™ and SmartLink ™: they automatically turn off the heater if no user is detected after the 'time out' period set by the user or if the bluetooth no longer detects any smartphone connected. - SafetyHeat ™: two independent safety controls constantly monitor the electronics and turn off the heating to prevent overheating. - Powerful Motor: A solid magnet and software-controlled ramp speed ensure stirring accuracy from 60 to 1,600 rpm. for secure magnetic coupling for viscous applications. - SmartHeat ™ and SmartRate ™: set the maximum unit temperature and rapid or slow rates of temperature and speed change. The scheduling function allows the storage of five multi-stage programs. Available models: E-G71HS07C model with small square plate: 178 x 178 mm; flow rate of 15 litres; ceramic plate; heating up to 500°C. E-G71HS10C model with large square plate: 254 x 254 mm; flow rate of 18 litres; ceramic plate; heating up to 500°C. e-G71HSRDM model with round plate: 135Ø mm; flow rate of 20 litres; aluminium plate; heating up to 380°C. Applications Thermosensitive chemistry and biology, heat fixation, solution pH optimization, solution sterilization, endothermic reactions, denaturation of organic material, preparation of samples and solutions, buffers and solubilization reagents, preparation media, boiling Display Backlit LCD display for temperature, speed and time, green indicator lights during the heating and shaking phases, hob over-temperature indicator, icons for SmartRateTM, SmartHeatTM, SmartPresenceTM, SmartLinkTM, probe in use and Adjustment of a single point Operation and accessories included Mains cable (included), 20.3 cm (8 ') stainless steel RTD temperature probe, 3.8 cm (1.5') PTFE coated stir bar, protective hood in use Communication The USB port can be used to program repetitive applications and increase safety thanks to SmartLinkTM technology; the long-range user detection function operated via the OHAUS Bluetooth dongle accessory (sold separately) Structure Probe connection, SmartHousingTM is heat insulated and chemical resistant, IP21 rated, tempered glass front panel, control knobs, On / Off switch to disconnect the heater, integrated support rod holder, ceramic plate or in aluminium easy to clean Construction features Temperature indicator light, audible alarm, SmartHeatTM temperature limitation function, SafetyHeatTM stops the heater in the event of a malfunction, temperature calibration function for five probes and five plate setpoints, temperature priority function, SmartRateTM functions

Safety and resistance for your laboratory OHS advance is designed to guarantee the highest safety st (more)andards. - The durable watertight housing and IP 54 protection rating ensure durability even in the most aggressive environments. - Built-in safety alarms for overload, over temperature and over current will maintain performance over time by stopping agitation - The safe operation of the start and stop knob and the lock key prevent unintentional starts and changes in working conditions. - The built-in vibration sensor with different sensitivity levels will stop the operation and inform you to make sure your OHS is stable and properly fixed. Continuous operation guaranteed and supported by a 3 year extended warranty. First-class performance OHS 200 Advance is the ideal solution for demanding applications operating with viscosities up to 100,000 mPa. The electronically controlled brushless motor of the OHS 200 Advance agitates up to 100 l (H2O) with a maximum torque of 200 Ncm and guarantees maximum durability. SpeedServoTM torque compensation technology maintains constant speed by automatically adapting to changes in viscosity. Set the OHS 100 Advance electronic speed control from 30 to 1300 rpm. Constant Torque at Any Speed The powerful brushless motor and microprocessor control ensure unprecedented performance, highlighting the difference between a conventional rod stirrer and VELP OHS Series rod stirrers. The torque remains constant at any speed, even at maximum. Having a constant torque is a very important parameter for the reproducibility of the analyzes. SmartChuck Technology: Inserting or Removing an Auction Has Never Been So Simple! How often do you have to remove or replace the stirring rod using two hands and see the rod fall into the liquid? SmartChuck ™ technology makes this activity quick and easy with the use of one hand and without special accessories. Two simple movements allow you to unlock the protection ring and remove or replace the stirring rod. In the event that the protection ring is opened during the analysis, the instrument stops shaking, showing a safety message on the display. Intuitive and precise control panel The intuitive 3.5” OHS Advance TFT display will guide you to precisely set your working conditions and achieve reproducible results. Show key information at a glance. Real-time information on viscosity variation with a resolution of 1 Ncm. Interact with OHS Advance from the real-time graph showing speed, torque and temperature of your test. The OHS Advance works without surveillance thanks to the timer that can be set from 1min to 99.59h. Ideal operating methods can be defined and programmed for demanding tasks where ramps and interval operations are required. Temperature under control OHS Advance is supplied with a Pt100 temperature probe included in the package. Constantly monitor the temperature of your reaction and set the meter to slow down or stop activity if the temperature reaches a defined value. This is important when you want to prevent exothermic reactions from interfering with your analysis! THE BENEFITS OF OHS ADVANCE CONNECTIVITY The OHS Advance is the only rod stirrer to offer the ability to control and monitor processes via Wi-Fi connection to VELP Ermes and via USB. The VELP Ermes cloud platform allows you to control the OHS Advance from PC, smartphone and tablet through a simple and intuitive web interface. With this platform designed by VELP it is possible to activate the shaking, set a timer, set a method (among those saved on the device), download and share reports with a click. For applications in the pharmaceutical, biotechnology and life science sectors, VELP Ermes can manage OHS Advance localized in clean rooms or other controlled environments, without the need for lengthy safety procedures. With the OHS / CotrollerSoftTM software, VELP offers the possibility to all laboratories that cannot benefit from cloud services, a valid alternative with USB connectivity. The OHS allow you to choose between two different control panels, Digital or Advanced, to better suit the needs of your laboratory. - Digital: precise speed settings; torque indicator; integrated timer. - Advanced: all information at a glance; intuitive; real-time graphs. Very easy to use and comfortable tools. Intuitive control panel equipped with Smartchuck: operations and rod change with one hand, effortlessly. - Mandrel opening: Ø from 1 to 13 mm - Stirring rod diameter for Pass-Through: up to 8.5mm Velp products guarantee you peace and security within your laboratory. - Safety button clearly visible from the front - IP54 protection - Integrated safety sensors CONTROL PANEL OF OHS ADVANCE MODELS A - LCD display B - Display keys C - Stirring speed kond D - Lock key E - Main switch F - Smart Chuck