Thermo Scientific NanoDrop One Microvolume UV-Vis Spectrophotometer

This listing is for a Agilent Cary 1000 UV-Vis spectrophotometer. The unit is in full working condi (more)tion and is ready for immidate realese. The Unit is supplied with a Agilent PCB 1500 Water Peltier System. The Agilent Cary 100 UV-Vis Spectrophotometer is a highly versatile and cost-effective instrument designed for a broad range of laboratory applications, making it an excellent choice for routine research in various fields such as chemistry, biochemistry, and materials science. Key Features: Double Beam Design: This design enhances accuracy and precision by allowing simultaneous measurement of the sample and reference, mitigating the impact of fluctuations in the light source. Wavelength Range: The instrument operates over a wide wavelength range of 190 to 900 nm, making it suitable for diverse applications, including those that require measurements in the UV and visible spectrum. Variable Spectral Bandwidth: The spectral bandwidth can be adjusted as low as 0.2 nm with variable slits, enabling users to optimize data resolution for specific experiments and applications. High Scanning Speed: With a scanning speed of up to 3000 nm/min, the Cary 100 provides quick data acquisition, enhancing efficiency during experimentation. Superior Photometric Stability: The optical design ensures robust photometric stability, resulting in consistent measurements over time, which is crucial for reproducibility in scientific research. Signal-to-Noise Optimizations: The special signal-to-noise reading mode allows for customizable control over measurement precision, enabling reduced scanning times in high-energy regions and improved averaging in lower throughput conditions. Flexible Operating Modes: Users have the flexibility to operate the spectrophotometer in single, double, or dual single beam modes, adapting the functionality to different experimental needs. Modular Software Control: The Cary WinUV software, which is Windows-based and modular in design, allows users to customize their experience with capabilities like advanced data processing, automatic peak labeling, and enhanced reporting and file transfer options. Accessories and Sample Holders: The instrument can be fitted with a wide range of accessories to extend its capabilities, and it comes shipped with liquid sample holders for immediate use. Benefits: Robust and User-Friendly: The quartz-coated optics not only ensure durability and easy cleaning but also protect against corrosive environments, thereby extending the lifespan of the instrument. Cost-Effective: Designed for routine laboratory work, the Cary 100 provides reliable performance without incurring high costs, making it an economical choice for laboratories. Tailored Experience: The software's modularity allows users to customize their operations and processing tools to fit specific requirements, enhancing productivity and workflow. Versatile Applications: With applications spanning materials testing, petrochemicals, and biotech/pharma studies, this spectrophotometer is a valuable addition to any research setting. The PCB 1500 Water Peltier System is an efficient and precise circulating water bath designed for temperature-sensitive applications in laboratories. Utilizing Peltier technology, this system is ideal for maintaining controlled temperatures for various experiments, particularly in conjunction with thermostatted cell holders. Key Features: Precision Temperature Control: Offers a temperature control precision of ±0.1°C, allowing for accurate temperature management critical for sensitive experiments. Wide Temperature Range: Operates within a temperature range of 0 to 100°C, making it versatile for a variety of applications requiring different thermal conditions. Stability and Accuracy: Maintains temperature stability at ±0.1°C and temperature accuracy of ±0.2°C, ensuring consistent and reliable performance for experiments that demand strict thermal control. Digital Display: Equipped with a user-friendly digital display showing a temperature range of 0 to 100°C, providing clear and immediate feedback. Water Flow Rate: The system supports a maximum water flow rate of 0.5 L/min to ensure effective heat exchange, crucial for maintaining stable temperatures in connected equipment. Control Options: Allows for both local and remote control operation, adding flexibility for users in various lab setups. Dual Voltage Settings: Accommodates both 110V and 220V electrical supplies, making it suitable for use in different geographical locations with varying electrical standards. Specifications: Operating Temperature: 4 to 90°C (39 to 194°F) Temperature Accuracy: ±0.2°C (0.36°F) Temperature Precision: ±0.1°C (0.18°F) Interface Options: Connects via RS-232 or USB for easy integration with computers or lab systems. LED Indicators: Displays power on/off status and alerts for errors, enhancing operational safety and ease of use. Electrical Supply: 220-240V at 50-60 Hz or 110-120V at 50-60Hz Power Consumption: 160 watts, indicating efficient energy use. Certifications: CE and cMETus certified, ensuring compliance with UL and CSA safety standards.

Jenway 7315 Spectrophotometer This item was removed from a university where it was surplus to requir (more)ement. This item is in good cosmetic condition and powered on, however, the item was displaying error 8 (see below): Therefore we are unable to test further. "Err 8 Warning: Redo Unable to find Vane on Turret This error indicates that the vane position zero on the turret cannot be found. The most likely causes for this error are: 1. The turret carousel has been removed and not replaced. Solution: Check if the turret is in the sample chamber and inserted properly. Press the key adjacent to the back icon to try rechecking." It is sold for spares/repairs

This Hitachi U-1900 UV-VIS Spectrophotometer was removed from a university lab where it was surplus  (more)to requirements. The units power up but have not been tested further. It is in good cosmetic condition with some marks from use. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

Template input incorrectly - Listed as Used and not S/R Varian Cary 500 Scan UV-VIS-NIR Spectrophoto (more)meter with PC and Monitor This system was removed from a university laboratory where it was surplus to requirements. The spectrophotometer powers on, communicates with the PC, and is in good condition with minimal wear. However, multiple error messages are displayed during operation. Therefore, it is listed as Spares/Repair. The previous client has also confirmed that the system was not operational when last used. Error Messages Displayed: - SEQFatal Chopper Failure – Reported during calibration - CCTVis Lamp Failure – Vis lamp has failed; restarting the unit did not resolve the issue, suggesting a replacement may be necessary - CHGVis Source Failure – Reported by the instrument software - NMPDatum Not Found – Re-powering suggested, though the issue persists Software Included (WinUV Folder): - Align - Cary Help - Scan - Simple Reads Additional Components: - Dan PC - Model: Dantum - Serial No.: 428199-1 - Condition: Powers on, good condition with some wear. - Monitor (Lenovo ThinkVision) - Serial No.: VN722039 - Condition: Powers on, great condition with no wear. Spectrophotometer Specifications:- Model: Cary 500 Scan - Serial No.: EL97123060

SAULAS Stainless Steel Test Sieve 200x50mm - 630 µm Frame Material: Stainless Steel Height (Metric): (more) 50 mm Diameter (Metric) External: 200mm Porosity: 630µm RETSCH Compatible With Seal

Incubateur / étuve BINDER BD-115 avec convection forcée 100°C (Remarque il s'agit d'une KB-115 avec  (more)le système de réfrigération qui ne fonctionne plus) Capacité : 115 litres Gamme de température : Température ambiante plus 5 °C à 100 °C porte intérieure en verre Affichage numérique de la température intégré 2 étagères Alimentation: 230 V Fréquence: 50-60 Hz Puissance: 460 W Dimensions intérieurs : 60 x 40 x 48 cm Dimensions hors tout : 83 x 70 x 101 cm Poids: 106 kg Testé à 37°C

Set of 2 electronic thermometers VWR Traceable Plus -50°C to 70°C New material in its original packa (more)ging The digital thermometers Traceable Plus control temperatures in freezers, water baths, heating blocks, incubators and refrigerators With probe Measuring range: −50…+70 °C Resolution: 0.1 °C

Ultra-low Temperature Freezer -80°C / 363 LIters ESCO UUS-363B-1-SS Lexicon II Temperature Range : (more) -50 to -86˚C Ambient temperature range : 15 to 32˚C (59 to 89˚F) 3 inner doors Interior volume (liter) : 363 Overall dimensions (w x d x h in mm) : 805/945/1980 Internal dimension (WxHxD) (mm) : 450x620x1300 Number of inner doors : 3 No. of storage racks per unit : 9 or 15 Shelves Area : 438 x 570 mm 230v/50Hz With Gold Controller : Microprocessor controller 4x20 in LCD screen Audible and visual alarms USB port for data download Net Weight : 271 kg (597 lbs) Shipping Weight : 321 kg (707 lbs) Shipping dimensions (WxDxH) : 850 x 1068 x 2121 mm

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.