Thermo Scientific Evolution 160 UV-10 UV/Vis Spectrophotometer 200-1190nm + Software

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Biochrom Libra S6 Spectrophotometer was removed from a university lab where it was surplus to r (more)equirements. The unit was inspected by a service engineer. The item powers on but failed calibration. The item is in a reasonable, used cosmetic condition apart from a cover on the bottom being missing along with two feet. It also has some tape residue that won't come off. The PSU is not included.

21 x Amersham Pharmacia LKB Novaspec II Spectrophotometer Lab This job lot of items come from a univ (more)ersity, where they were surplus to requirement. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all.

Jenway 6705 UV/Vis Spectrophotometer This item was removed from a university laboratory where it was (more) surplus to requirements. The spectrophotometer is in poor cosmetic condition, with a visible crack on the front (appears to have been repaired with glue by the previous owner) and several scratches and stains that could not be removed. It has been powered on, but no further testing has been conducted. The password for the Supervisor Account is available on request. Specifications: - Instrument Memory: 968 MB, 99% Free (Files 47) - Light Source: Xenon - Spectral Bandwidth: 4 nm - Stray Light: <0.05% at 220 nm - Wavelength Range: 320-1100 nm Model: 6705Serial No.: 1020

This was removed from a university lab where it was surplus to requirements The unit powers up but h (more)as not been tested further. It is in reasonably good cosmetic condition with minor marks.

MARSHALL Select MS-SP200-1100 Spectrophotometer, 200-1,100nm Wavelength Range 200 to 1,100nm Wavelen (more)gth Accuracy ± 2nm Sample Compartment 4 position, 10mm pathlength cuvette Features - Utilizes Tungsten and Deuterium lamps for a broad wavelength coverage from 200 to 1,100nm - Features auto-setting wavelength to streamline calibration and minimize errors - Equipped with a large, backlit LCD screen that displays detailed graphical data with adjustable brightness - Stores up to 200 test results and standard curves in RAM for efficient data management - Includes a USB port for straightforward data export to external storage devices - Accommodates cuvettes with path lengths from 5 to 100mm and supports various holders The MARSHALL Select MS-SP200-1100 Spectrophotometer is a cutting-edge analytical tool tailored for extensive use in educational and research environments, where precise quantification is crucial in areas such as biotechnology, quality control of new materials, and microbial studies. Operating over a wavelength range of 200 to 1,100 nm, this device is powered by both tungsten and deuterium lamps, ensuring comprehensive coverage across a wide spectrum. The system's automatic lamp switching enhances usability, mitigating operational errors by auto-calibrating wavelengths via intuitive arrow keys. With its high resolution and performance, the MS-SP200-1100 stands out as a highly stable instrument that consistently delivers accurate results, making it a valuable asset in any laboratory setting. User experience is central to the design of the MS-SP200-1100, featuring an advanced LCD display that presents data and graphs with adjustable brightness for clearer visibility and analysis. The spectrophotometer is adept at handling a variety of sample sizes, from films as thin as 1-3mm using specific holders, to larger cuvettes with optional extensions, accommodating up to 100mm path length cuvettes. Connectivity is also a priority, with USB ports for data transfer to external storage and Bluetooth capabilities for wireless printing, ensuring seamless integration into modern lab environments. Certified with cTUVus and CE, the MARSHALL Select MS-SP200-1100 ensures compliance with the highest safety and quality standards, solidifying its role as an essential tool for scientific advancement. INCLUDED: The MARSHALL Select MS-SP200-1100 Spectrophotometer, 200-1,100nm includes: - Tungsten Lamp - Deuterium Lamp - 4 Place Cuvette Holder - 4 x 3.5ml Glass Square Cuvettes - 2 x 3.5ml Quartz Square Cuvettes - Dust Cover - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IAC Amplivox 250 Series Mini Sound Shelter w/ CA850 Automatic Audiometer This system was removed fro (more)m a university lab where it was surplus to requirement. Both the Mini Sound Shelter and Automatic Audiometer are in good cosmetic condition and power on. The soundproofing functions effectively, as demonstrated through vocal testing within the booth. However, further testing could not be complete as the unit does not include headphones. Included; - Amplivox 250 Series Mini Sound Shelter - Amplivox CA850 Series 4 Automatic Audiometer

This Nikon TMS Inverted Microscope was removed from a university lab where it was surplus to require (more)ments. The unit powers up and has been tested by a service engineer. It is in full working order. There are no objectives included but it was tested with one from another unit. It is in good cosmetic condition with some marks from use. Eyepieces:2x CFWE 10XA/18

LEEC Research CO2 Incubator Model-GA2000 This item was removed from a university where it was surplu (more)s to requirement. The unit powers up and is in good working order (thermometer not included). It is in reasonably good cosmetic condition.

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul Volume Range 20-200ul Adjustable or Fixed V (more)olume Adjustable Volume Accuracy (±%) 0.60/0.80/1.00 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty