Shimadzu RF-5301PC Fluorescence Spectrophotometer

Template input incorrectly - Listed as Used and not S/R Varian Cary 500 Scan UV-VIS-NIR Spectrophoto (more)meter with PC and Monitor This system was removed from a university laboratory where it was surplus to requirements. The spectrophotometer powers on, communicates with the PC, and is in good condition with minimal wear. However, multiple error messages are displayed during operation. Therefore, it is listed as Spares/Repair. The previous client has also confirmed that the system was not operational when last used. Error Messages Displayed: - SEQFatal Chopper Failure – Reported during calibration - CCTVis Lamp Failure – Vis lamp has failed; restarting the unit did not resolve the issue, suggesting a replacement may be necessary - CHGVis Source Failure – Reported by the instrument software - NMPDatum Not Found – Re-powering suggested, though the issue persists Software Included (WinUV Folder): - Align - Cary Help - Scan - Simple Reads Additional Components: - Dan PC - Model: Dantum - Serial No.: 428199-1 - Condition: Powers on, good condition with some wear. - Monitor (Lenovo ThinkVision) - Serial No.: VN722039 - Condition: Powers on, great condition with no wear. Spectrophotometer Specifications:- Model: Cary 500 Scan - Serial No.: EL97123060

This VWR V-3000PC Visible Spectrophotometer was removed from a university lab where it was surplus t (more)o requirements. The unit powers up and starts a 15 min preheat. After this, it asks if it was to be calibrated or not. We have not tested it further. It is in good cosmetic condition with marks from use.

SCILOGEX SCI-UV1000 UV/Vis Spectrophotometer The Scilogex Spectrophotometers are indispensable instr (more)uments routinely used in colleges, universities and research institutes for quantitative analysis in fields including biotechnology and quality control of new material developed. V-Series provides high resolution, high performance and excellent stability.INCLUDED: The SCILOGEX SCI-UV1000 UV/Vis Spectrophotometer includes: - Deuterium Lamp - Tungsten Lamp - 4 Place Cuvette Holder - 4 x 3.5mL Glass Cuvettes - 2 x 3.5mL Quartz Cuvettes - Dust Cover - Power Cord - One Year Manufacturer's Warranty

SCILOGEX SCI-2102UV Single-Beam Spectrophotometer Wavelength Range 190 to 1,100 nm Wavelength Accur (more)acy ±0.1nm @ 656.1nm Optical System Single Beam, Grating 1200 lines/mm Features - 10.1 inches high resolution TFT colored capacitive touch screen and windows graphic interface - Powerful functions like Photometric measurement, Quantitative measurement, Kinetics, Spectrum scan, DNA\Protein test, multi-wavelength test, etc - In-house massive memory is capable of saving up to 1024M for test data & working curves - Various optional accessories, like automatic cell holder, thermostatic automatic sampler, adjustable micro cell holder, reflection accessory and integrating sphere, etc. which extend the application range of device and combine the requirements of both common and unique samples - Supports USB storage. The USB port can be used for data transfer, which is easily exported to Excel for further processing, analysis and storage - Socket type deuterium and tungsten lamp can make lamps switching without optics debugging and easy to be replaced The SCILOGEX SCI-2102UV Single-Beam Spectrophotometer offers precise and reliable spectroscopic measurements with advanced features tailored for diverse laboratory needs. Its single-beam optical system with a 1200 lines/mm grating ensures accurate light diffraction, covering a wide wavelength range of 190 to 1,100 nm with a 2nm spectral bandwidth. The high-resolution 10.1-inch TFT colored capacitive touch screen, coupled with a user-friendly Windows graphical interface, simplifies operation and enhances productivity. The device supports multiple work modes, including photometric, quantitative, kinetics, spectrum scanning, DNA/protein testing, and multi-wavelength analysis, making it highly versatile for a variety of applications. Equipped with in-house memory capable of saving up to 1024M of test data and working curves, the SCI-2102UV streamlines data management. USB storage and export functionality allow seamless transfer of results for further processing in Excel. Its socket-type deuterium and tungsten lamps can be easily replaced without optical adjustments, minimizing downtime. Optional accessories, including automatic cell holders, thermostatic samplers, and integrating spheres, extend its application range for both standard and specialized samples. Designed to follow GLP/GMP standards, the spectrophotometer provides user management, logging, and data tracking features, ensuring compliance and traceability.INCLUDED: The SCILOGEX SCI-2102UV Single-Beam Spectrophotometer includes: - Tungsten Lamp - Deuterium Lamp - 4 x 10mm Glass Cuvettes - 2 x 10mm Quartz Cuvettes - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Spectral range (190 – 850 nm) for measuring a variety of samples types: Peptides (205 nm), DNA and R (more)NA (260 nm), Purified protein (280 nm), Toxicology assays and industrial dyes (490 nm), Gold nanoparticles (520 nm), Colorimetric protein assays (BCA 562 nm, Bradford 595 nm, Modified Lowry 650 nm, Pierce 660 660 nm), Optical Density measurements (600 nm) Light Source: Xenon Flash Wavelength Accuracy: ±1 nm Spectral Bandwidth: ≤1.8 nm (FWHM at Hg 254 nm) Pathlength: 0.030 to 1.0 mm (auto-ranging) Photometric Accuracy: 3% at 0.97 A, 302 nm, (Absorbance expressed at Abs/mm at 25°C) Photometric Range:  0–550 A Repeatability Typical: 0.002 A (1.0 mm path) or 1%CV, whichever is greater (SD of 10 individual measurements at 0.97 A) Sample Volume: Minimum 1μL Measurement Time: 8 seconds Detection Range: dsDNA 2.0 ng/μL, BSA (IgG) 0.06 (0.03) mg/mL Detector Type: 2048-element CMOS Linear Image Sensor Display: 7 in. High Definition Color Display, 1280 x 800 pixels For Use With (Application): Nucleic Acid A260, A260/A280, A260/A230 and Labeled Nucleic Acids;, Protein A280 and A205, Protein Pierce 660, Protein Bradford, Protein BCA, Protein Lowry, Labeled Proteins, OD600, Kinetics, UV-Vis, and Custom Methods Dimensions (DxWxH): 200 x 254 x 323 mm Weight: 3.6 kg

Ohaus 30130874 4 x 8-Place PCR Strip Fixed Angle Rotor The Ohaus 30130874 4 x 8-Place PCR Strip Fixe (more)d Angle Rotor accommodates a capacity of up to 4 x 0.2 ml PCR8. This rotor is designed for use with Ohaus FC5515, and FC5515R series centrifuges and reaches speeds up to 15,000 RPM with a maximum RCF of 15,342 x g. INCLUDED: The Ohaus 30130874 4 x 8-Place PCR Strip Fixed Angle Rotor includes: - Ohaus 30130874 4 x 8-Place PCR Strip Fixed Angle Rotor - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scilogex SCIVac-E Aspiration System, 110-240V Vacuum Range 0-500mbar Flow Rate 17mL/s (liquid) Aspi (more)ration Speed 15L/min(air) Features - Small and compact to fit in the cabinet, on the benchtop, or beneath the bench. - Easy to switch between manual aspiration and continuous aspiration mode, reducing RSI (Repetitive Strain Injury) and improving efficiency. - Collection bottle outlet with hydrophobic filter prevents aerosol and liquid contamination. - Brushless motor for low noise and long life. - Single and multichannel nozzles and nozzles included for use with 200uL pipette tips - Components in contact with liquids can be autoclaved. - Adjustable vacuum level with indicator light for multiple applications in a single lab. - cTUVus approved UL/CSA. The Vacuum Aspiration System/2L Vacuum Aspiration System is a vacuum system with an integral pump and adjustable, electronic vacuum controller for laboratory use. The SCILOGEX SCIVac-E vacuum aspirator seamlessly switches to continuous aspiration mode, wiping out another source of RSI in your lab. This aspiration system is designed for use in applications including: cell culture, RNA/DNA Extraction, Microplate Waste Removal, Separation of liquids and solids, as well as biological and chemical liquid waste recovery. INCLUDED: The Scilogex SCIVac-E Aspiration System, 110-240V includes: - Single Channel Nozzle - Multichannel Nozzle - Operators Manual - Power Cord - 2 Year Manufacturer's Warranty

IN/OUT module – semiconductor digital inputs/outputs which can take two binary states: “ (more)0” (inactive) or “1” (active). The input ativation performs the assigned function of the scale, for example, zeroing, tare or process start. The output activation informs about the execution of the assigned function, for example, a certain weight threshold exceeding, scale stability or the process continuation. The IN/OUT module comes for an extra charge in PUE H315 (4 IN/ 4 OUT).

The scales is designed for weighing patients in health care facilities and in clinics. It is equippe (more)d with indicator PUE C315 series comprising a backlit LCD display and 5-button keyboard ensuring simple operation of scale basic functions. Personal scales is supplied either by mains or by batteries. The model without height-meter has an indicator attached to the weighing platform. It is manufactured as a dual range instrument.

CY10 scale’s multi functions The CY10 series multifuncional scale is designed for fast, accura (more)te and repeatable weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 multifuncional scale: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Multifunctional scale, including labelling scale If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series multifuncional scale can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

MA X2.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.