Shimadzu IRAffinity-1 FTIR Spectrophotometer with Software Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Spectral range (190 – 850 nm) for measuring a variety of samples types: Peptides (205 nm), DNA and R (more)NA (260 nm), Purified protein (280 nm), Toxicology assays and industrial dyes (490 nm), Gold nanoparticles (520 nm), Colorimetric protein assays (BCA 562 nm, Bradford 595 nm, Modified Lowry 650 nm, Pierce 660 660 nm), Optical Density measurements (600 nm) Light Source: Xenon Flash Wavelength Accuracy: ±1 nm Spectral Bandwidth: ≤1.8 nm (FWHM at Hg 254 nm) Pathlength: 0.030 to 1.0 mm (auto-ranging) Photometric Accuracy: 3% at 0.97 A, 302 nm, (Absorbance expressed at Abs/mm at 25°C) Photometric Range:  0–550 A Repeatability Typical: 0.002 A (1.0 mm path) or 1%CV, whichever is greater (SD of 10 individual measurements at 0.97 A) Sample Volume: Minimum 1μL Measurement Time: 8 seconds Detection Range: dsDNA 2.0 ng/μL, BSA (IgG) 0.06 (0.03) mg/mL Detector Type: 2048-element CMOS Linear Image Sensor Display: 7 in. High Definition Color Display, 1280 x 800 pixels For Use With (Application): Nucleic Acid A260, A260/A280, A260/A230 and Labeled Nucleic Acids;, Protein A280 and A205, Protein Pierce 660, Protein Bradford, Protein BCA, Protein Lowry, Labeled Proteins, OD600, Kinetics, UV-Vis, and Custom Methods Dimensions (DxWxH): 200 x 254 x 323 mm Weight: 3.6 kg

Wavelength Range: 190 – 1100 nm Wavelength Accuracy: ± 0.5nm across wavelength range Wavelength Repr (more)oducibility: ± 0.1 nm Lamp Source: Xenon Beam: Double Beam Optical System: Czerny-Turner Monochromator Bandwidth: 2 nm Detector: Dual Solid State Silicon photodiode Photometric Range: -4.000 A to 4.000 A Stray Light: < 0.050%T at 220 nm (NaI), < 0.050%T at 340 nm (NaNO2) Zero Stability: ± 0.001A/hr at 500 nm Baseline Flatness: ± 0.002 A 220 to 900 nm Noise: <0.002 A peak to peak, 0.0008 A RMS near 2 A at 500 nm. <0.00020 A RMS at 0 A at 500 nm over 20 measurements Photometric Accuracy: ± 0.002 A at 0.5 A, ± 0.004 A at 1 A, ± 0.006 A at 2 A at 440 nm, 456 nm, 546.1 nm, 590 nm, 635 nm ± 0.005 A using 60 mg/L K2Cr2O7 Photometric Reproducibility: ± 0.002 A at 1 A Spectral Scanning: Yes (up to 1100 nm) Measurement Type: Fixed Wavelength, Abs/%T, Abs ratio, Abs difference, concentration (standard curve), concentration (factor), multiwavelength, kinetics, Life Science Methods, user log-on, Equation editor Cell Holder: Dual (sample and reference) Method Storage: Up to 90 on-board, unlimited via USB Display: Colour Touchscreen Data Interface: USB Dimensions (WxDxH): 535 x 440 x 335 mm Weight: 17.5 kg

This Jenway 6505 UV/Vis Spectrophotometer was removed from a university lab where it was surplus to  (more)requirements. The unit powers up but it does not have an application card. It was professionally serviced using a card from another unit (not included). Instrument passed calibration testsWavelength Calibration Tests - PASSPhotometric Calibration Tests - PASSStray Light Checks - PASS It is in reasonably good cosmetic condition with some marks from use.

This was removed from a university lab where it was surplus to requirements The unit powers up but h (more)as not been tested further. It is in reasonably good cosmetic condition with minor marks.

This Shimazdu UVmini 1240 CE UV-VIS Spectrophotometer was removed from a university lab where it was (more) surplus to requirements. The unit powers up and passes all self-tests. We were unable to carry out further tests at our facility. It is in reasonably good cosmetic condition with marks from use. The printer is in working order and has been tested.

Memmert BE300 incubator. Capacity 39 L. Max temperature: 70ºC. Stainless steel. 2 shelves. Inner gla (more)ss door. Ignition module: 3 indicators, fresh air regulator and manual ignition controller. Work control module: rotary controller and set for temperature and programs. Timer from 1 to 999 min. Overheating control and time self-diagnosis. RS232C. Dimensions (LHD): inner 480*320*250 mm, external 630*435*595 mm. Includes manual. Optimize your experiments with the Memmert BE300 Incubator, available at Galileo Equipment. Perfect for applications in microbiology, cell research, and stability testing, this oven offers precise temperature control and thermal uniformity. Its robust design and advanced technology guarantee consistent and reliable results. With ease of use and energy efficiency, the Memmert BE300 is the ideal choice for demanding laboratories. Buy now and take advantage of our exclusive offers to improve your laboratory performance with this high-quality oven!

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don&rsquo;t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what&rsquo;s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Scilogex 1.5/2ml x 24 Aluminum Alloy Rotor with CoverThe Scilogex Aluminum Alloy Rotor with cover ha (more)s the capacity to accomodate 24 x 1.5/2mL tubes and can a reach maximum speed of 15,000RPM. For use with the D3024 &amp; D3024R centrifuges. INCLUDED: The Scilogex 1.5/2ml x 24 Aluminum Alloy Rotor with Cover includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco CentriVap Benchtop Concentrator with Glass Lid Eliminates bumping and foaming, maximize (more)s trace solute recovery Microprocessor-controlled 300w heater covers ambient to 100C in 1° increments Optional Heat Boost™ surrounds chamber with extra controlled heat at programmed temperature, in closer proximity to sample Electrical receptacle included for an accessory vacuum pump (available separately) Vacuum delay prevents bumping by allowing rotor to achieve speed before applying vacuum Quick-Start™ button starts rotor, heater, timers and pump Quick-Stop™ system stops pump, opens vacuum release valve and stops rotor in seconds after time expires or RUN/STOP button is pressed Memory stores nine user programs (temperature/heat time/run time); LCD shows operating parameters and programs Compact, low-profile design Choice of removable acrylic lid with large, durable lid seal, or glass lid for use with solvents that attack acrylics Safety latch locks lid when rotor is turning, prevents start-up when lid is open Corrosion-resistant sample chamber has epoxy finish for easy cleaning and decontamination Microprocessor-controlled brushless motor runs at up to 1725rpm Stacks on top of cold trap to save space With 0.5 in. O.D. vacuum tube fitting INCLUDED: The Labconco 7810014 CentriVap Benchtop Concentrator with Glass Lid, 115V, 50/60Hz includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty