SCILOGEX SCI-5101XUV Double-Beam Spectrophotometer

Picarro Cavity Ringdown Isotopic CO2 Spectrophotometer G1101-i & GSP-1000 PSU This was removed f (more)rom a university lab where it was surplus to requirements. This System includes;1x Picarro Cavity Ringdown Isotopic CO2 Spectrophotometer G1101-iMod No. ESP-1000 DASThe unit powers on and is in good cosmetic condition. 1 x Power Supply/PCMod No. ESP-1000The unit powers on, it communicates with the CO2 Spectrophotometer and is in good cosmetic condition. Accessories included1x Keyboard1x Mouse1x Communication cable We connected up a monitor (not included) and launched the program with success. The system was not tested further. The software is for Isotropic Carbon Dioxide Monitoring.

IRAffinity-1S Fourier Transform Infrared Spectrophotometer Lab This item was removed from a universi (more)ty where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. We are told the instrument is technically working, but it needs some parts replaced. For this reason it is sold for spares/repairs.

This Unicam Helios Alpha Spectrophotometer was removed from a university lab where it was surplus to (more) requirements. The unit powers up and passes all self-checks. It is in good cosmetic condition with only minor marks from use.

This was removed from a university lab where it was surplus to requirements The unit powers up but h (more)as not been tested further. It is in reasonably good cosmetic condition with minor marks.

This item has just arrived in our stock. Please enquire for further details.

Wavelength Range: 190 – 1100 nm Wavelength Accuracy: ± 0.5nm across wavelength range Wavelength Repr (more)oducibility: ± 0.1 nm Lamp Source: Xenon Beam: Double Beam Optical System: Czerny-Turner Monochromator Bandwidth: 2 nm Detector: Dual Solid State Silicon photodiode Photometric Range: -4.000 A to 4.000 A Stray Light: < 0.050%T at 220 nm (NaI), < 0.050%T at 340 nm (NaNO2) Zero Stability: ± 0.001A/hr at 500 nm Baseline Flatness: ± 0.002 A 220 to 900 nm Noise: <0.002 A peak to peak, 0.0008 A RMS near 2 A at 500 nm. <0.00020 A RMS at 0 A at 500 nm over 20 measurements Photometric Accuracy: ± 0.002 A at 0.5 A, ± 0.004 A at 1 A, ± 0.006 A at 2 A at 440 nm, 456 nm, 546.1 nm, 590 nm, 635 nm ± 0.005 A using 60 mg/L K2Cr2O7 Photometric Reproducibility: ± 0.002 A at 1 A Spectral Scanning: Yes (up to 1100 nm) Measurement Type: Fixed Wavelength, Abs/%T, Abs ratio, Abs difference, concentration (standard curve), concentration (factor), multiwavelength, kinetics, Life Science Methods, user log-on, Equation editor Cell Holder: Dual (sample and reference) Method Storage: Up to 90 on-board, unlimited via USB Display: Colour Touchscreen Data Interface: USB Dimensions (WxDxH): 535 x 440 x 335 mm Weight: 17.5 kg

Art Robbins Instruments Phoenix/RE Model-600-1010-00 Lab This item was removed from a university whe (more)re it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The previous owner has notified us that the needle requires replacement. This item includes:- Phoenix/RE - DeeracFluidics Spot On - Melcor Thermoelectric Temperature Controller MTTC1410 - Various Cables and Wires

MVE XC 34/18 Nitrogen Dewar This item was removed from a university where it was surplus to requirem (more)ents. The dewar is in good cosmetic condition, with signs of use. Specifications: - Model: XC 34/18 - Serial No.: ARB97K105 - Capacity: 34 litres - Neck Opening: 9cm - Holds: 6 canisters

Polyscience P60N2A101B IP-60 Immersion Probe Cooler, 1.5 Rigid Coil Probe, -60 to -20C, 120V, 60Hz3D (more) Visualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P60N2A101B IP-60 Immersion Probe Cooler, -60°C to -20°C, 150W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus EX1103N Explorer Precision Balance Maximum Capacity 1,100 g Readability 1 mg Repeatability (Ty (more)pical) 0.001 g Features - 1,100g capacity with 1 mg readability, ideal for demanding laboratory and industrial applications - Automatic internal calibration ensures consistent accuracy and reduces the need for manual calibration - Fast stabilization times, optimized linearity, and enhanced vibration filtering - Metal base with ABS top housing, stainless steel pan, and illuminated level indicator for long-lasting use - Supports a wide range of applications including weighing, parts counting, percent weighing, check weighing, and more - Detachable terminal and automatic glass draftshield with top-mounted side doors for flexible use - Standard RS232 and USB ports, with optional second RS232 or Ethernet for easy data transfer - Four programmable touchless sensors for initiating functions like zero, tare, and print without physical contact The OHAUS Explorer Balance Series offers a blend of advanced features and modern design, providing unmatched functionality for laboratory and industrial applications. With capacities ranging up to 35kg and readabilities from 0.1mg to 0.1g, these balances cater to a wide range of precision weighing needs. Key features include the AutoCal™ automatic internal calibration system, ensuring daily accuracy without the need for external weights, and a large color touchscreen that simplifies operation through an intuitive interface.Many explorer balances are designed for versatility, featuring up to 14 application modes and multiple connectivity options such as RS-232, USB, and optional Ethernet. The modular design allows for flexible workspace integration, and select models include a frameless draftshield with motorized side doors, operated via programmable touchless sensors for hands-free efficiency. AD models offer automatic door functions, enhancing convenience, while N models are NTEP certified, ensuring compliance with strict readability and repeatability standards. D models feature dynamic capacity ranges, making them adaptable for various weighing tasks.Durable construction with a metal base, stainless steel pan, and integrated weigh-below hook ensures long-lasting performance. The Explorer series also supports advanced user management, data logging, and security features, making it ideal for regulated environments. Whether for basic weighing, parts counting, or more complex measurements, the OHAUS Explorer Balance Series delivers precision, reliability, and ease of use, setting a new standard in high-performance balances.Click Here to View Product Video INCLUDED: The Ohaus EX1103N Explorer Precision Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty