Pharmacia GeneQuant II RNA/DNA Calculator Spectrophotometer

Eppendorf BioPhotometer Model: 6131 Spectrophotometer This was removed from a university lab where i (more)t was surplus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with marks from use.

GeneSys 10S UV-VIS Spectrophotometer This item was removed from a university where it was surplus to (more) requirement. This item is in fair cosmetic condition. The unit powers on, with all buttons and the screen functioning properly with no damage. Model: G10S UV-Vis

Varian Cary Eclipse Fluorescence Spectrophotometer w/ PC & Cary Eclipse Software This system was (more) removed from a university where it was surplus to requirement. It is in good cosmetic condition and in full working order. PC has the following software installed:- Carry Eclipse Software. - Aquanova Software. The unit has been professionally serviced; a brief report summary is listed below. Checked Intensity of the lamp signal was fine and checked alignment was ok.Ran instrument software calibration checks with pass.Ran calibration checks using Ovalene sample in both Excitation and Emission modes.Results within spec.Instrument fine. Full report available on request.

MARSHALL Select MS-SP325-1000 Spectrophotometer, 325-1,100nm Wavelength Range 325 to 1,000nm Wavelen (more)gth Accuracy ± 1.8nm Sample Compartment 4 position, 10mm pathlength cuvette Features - Equipped with both Tungsten and Deuterium lamps, covering a wavelength range of 325 to 1,000 nm - Designed to significantly reduce stray light for more precise measurements - Streamlines setup and operation with automatic wavelength and light source adjustments - Tracks the performance and lifespan of both lamp types to ensure optimal functionality - Can store up to 200 different programs - LCD screen for straightforward navigation and status updates - Maintains stability with minimal noise and error, ensuring reliable results The MARSHALL Select MS-SP325-1000 Spectrophotometer, an advanced analytical instrument meticulously designed for extensive use in industries such as agriculture, geology, metallurgy, and environmental sciences. This single-beam spectrophotometer, equipped with both a Tungsten lamp and a Deuterium lamp, operates within a wavelength range of 325 to 1,000 nm, offering precision and versatility for a variety of quantitative and qualitative research tasks. The spectrophotometer excels in studies related to the concentration of nucleic acids, proteins, and bacteria, benefiting from its high-class grating and hermetically sealed light path which significantly reduce stray light, thereby enhancing measurement accuracy. The MS-SP325-1000 is not only powerful but also user-friendly and safe, featuring an imported and environmentally friendly Deuterium lamp that minimizes ozone inhalation. With real-time lamp monitoring, automatic wavelength calibration, and an SiO2 coated optical mirror to diminish external light interference, this device ensures reliable and precise operation. Its robust construction is complemented by a simple, elegant design with an easy-to-read LCD display. Capable of storing up to 200 programs, the MS-SP325-1000 facilitates efficient and effective workflow management, making it a critical tool for quality control in analytical testing across various sectors. Whether for medical laboratories, educational settings, or industrial applications, this spectrophotometer stands out as a requisite instrument for any conventional laboratory. INCLUDED: The MARSHALL Select MS-SP325-1000 Spectrophotometer, 325-1,100nm includes: - Tungsten Lamp - Deuterium lamp - 4 Place Cuvette Holder - 4 x 3.5ml Glass Square Cuvettes - 2 x 3.5ml Quartz Square Cuvettes - Dust Cover - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

SCILOGEX SCI-UV1000 UV/Vis Spectrophotometer The Scilogex Spectrophotometers are indispensable instr (more)uments routinely used in colleges, universities and research institutes for quantitative analysis in fields including biotechnology and quality control of new material developed. V-Series provides high resolution, high performance and excellent stability.INCLUDED: The SCILOGEX SCI-UV1000 UV/Vis Spectrophotometer includes: - Deuterium Lamp - Tungsten Lamp - 4 Place Cuvette Holder - 4 x 3.5mL Glass Cuvettes - 2 x 3.5mL Quartz Cuvettes - Dust Cover - Power Cord - One Year Manufacturer's Warranty

Maximum temperature: 300 ºC. Speed range: 1100 rpm Dimensions (DxHxW): 270 x 95 x 160 mm Hot plate a (more)rea: Ø 130 mm

LABOMAG Be9 magnetic stirrer - 1 liter New equipment in its original packaging Model: Be 9 (nine) Sp (more)eed ​​range: 100 - 1000 min⁻¹ Max mixing capacity H₂O: 1000 ml Stirring power: 4 W W×D×H: 130×195×22 mm

This Packard Multiprobe ll EX Robotic Liquid Handler was removed from a university lab where it was  (more)surplus to requirements. This item is in good cosmetic condition and powers up, unable to test further at our facility. When tested with a PC, this item did not communicate successfully, therefore it is listed as Spares or Repairs.

This Sanyo CO2 Incubator Double Stack MCO-17AI MCO-18AIC (UV)was removed from a university lab where (more) it was surplus to requirements. Both units have been tested with and CO2 and temperature sensor and are in good working order. They will require calibration upon installation. They are in good cosmetic condition with minor marks from use. Top:-Model - MCO-17AISN - 60301691External dimensions - L70 W63 H90cmInternal dimensions - L50 W48 H66cm3 Shelves - 45 x 45cmNet Weight - 91kg Bottom:-Model - MCO-18AIC (UV)SN - 31112791External dimensions - L71 W64 H91cmInternal dimensions - L51 W48 H66cm3 Shelves - 45 x 45cmNet Weight - 93kg

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

IKA Tube Mill 100 control Speed Range 5000 - 25000 rpm Feed hardness max. 5 Mohs Process type Batch  (more)Features - Transparent grinding chamber and cover for real-time observation of grinding tests - Suitable for hard (up to 5 Mohs hardness), dry, and brittle materials, ideal for seeds like corn and wheat - Mill safety feature: starts only when the hood is closed - Clear OLED display with multilingual support and error code visibility - Timer adjustable from 5 seconds to 3 minutes for controlled operations - USB interface for controlling and documenting all operational parameters - Optional interval operation for versatile processing - Infinitely variable speed from 5,000 to 25,000 rpm for precise control - Programmable and storable test conditions for repeatability The world’s first patented Tube Mill 100 control is a batch mill with disposable grinding chambers. Eliminates possibility of cross-contamination and the effort of cleaning. The Tube Mill 100 control accommodates larger grinding chambers with a maximum volume of 100 ml (MT 100) The grinding chamber and cover are made of a transparent material so grinding tests can be observed at any time. The mill can be used for hard (Mohs hardness up to 5), dry and brittle materials. It is especially suitable for grinding seeds, such as corn and wheat.INCLUDED: The IKA Tube Mill 100 control includes: - MT 100 milling tube - MT 40 milling tube - MMT 40.1 Multi-use milling tube - Coupling extractor - USB A-B Cable - Manufacturer's Documentation - 2 Year Manufacturer's Warranty