Hitachi U-1900 UV-VIS Spectrophotometer Lab

Varian Cary 300 Bio Uv-Visible Spectrophotometer with Sample Preparation System SPS 3 from 2005, inc (more)luding PC and software. It comes from a water laboratory and always neatly maintained. Due to temporary standstill, the device must first be maintained before use (including cleaning mirrors).

Shimadzu UV-VIS Spectrophotometer UV-2401PC & TCC Temperature Controller Lab This system was rem (more)oved from a university lab where it was surplus to requirement. All included units are in good cosmetic condition and power on, we are unable to test them further as a system at our facility. This system comprises the following: - Shimadzu UV-2401PC            Serial No. A10834432670 - Shimadzu TCC-240A Temperature Controlled Cell Holder - Shimadzu TCC-Temperature Controller           A103844

Perkin Elmer Lambda 35 UV/VIS Spectrophotometer System w/ PC & Software This was removed from a  (more)university lab where it was surplus to requirements. The unit has been professionally serviced and is in good working order. It is in good cosmetic condition with minor marks.

Shimadzu IRAffinity-1 FTIR Spectrophotometer with Software This was removed from a university lab w (more)here it was surplus to requirements. The unit powers up and the lab has confirmed it is in working order, though it has not been used for a few years. It is in good cosmetic condition with marks from use. It comes with manuals and software discs:-Shimadzu IR Solution version 1.50Shimadzu IR Solution version 1.50SU1Shimadzu IRAffinity-1 User Systems GuideShimadzu IRPrestige-21 User Systems GuideShimadzu IRAffinity-1/IRPrestige-21/FTIR-84005 Operation GuideShimadzu IRPrestige-21/FTIR-84005 Operation Guide

Picarro Cavity Ringdown Isotopic Methane Spectrophotometer G1112-i - ESP -1000 This was removed fro (more)m a university lab where it was surplus to requirements. This System includes;1x Picarro Cavity Ringdown Isotopic Methane Spectrophotometer G1112-iMod No. ESP-1000 DASThe unit powers on and is in good cosmetic condition. 1 x Power Supply/PCMod No. ESP-1000The unit powers on, communicates with the Spectrophotometer and is in good cosmetic condition. We connected up a monitor (not included) and launched the program with success. The system was not tested further. The software is for Isotropic Methane Monitoring.

MARSHALL Select MS-SP325-1000 Spectrophotometer, 325-1,100nm Wavelength Range 325 to 1,000nm Wavelen (more)gth Accuracy ± 1.8nm Sample Compartment 4 position, 10mm pathlength cuvette Features - Equipped with both Tungsten and Deuterium lamps, covering a wavelength range of 325 to 1,000 nm - Designed to significantly reduce stray light for more precise measurements - Streamlines setup and operation with automatic wavelength and light source adjustments - Tracks the performance and lifespan of both lamp types to ensure optimal functionality - Can store up to 200 different programs - LCD screen for straightforward navigation and status updates - Maintains stability with minimal noise and error, ensuring reliable results The MARSHALL Select MS-SP325-1000 Spectrophotometer, an advanced analytical instrument meticulously designed for extensive use in industries such as agriculture, geology, metallurgy, and environmental sciences. This single-beam spectrophotometer, equipped with both a Tungsten lamp and a Deuterium lamp, operates within a wavelength range of 325 to 1,000 nm, offering precision and versatility for a variety of quantitative and qualitative research tasks. The spectrophotometer excels in studies related to the concentration of nucleic acids, proteins, and bacteria, benefiting from its high-class grating and hermetically sealed light path which significantly reduce stray light, thereby enhancing measurement accuracy. The MS-SP325-1000 is not only powerful but also user-friendly and safe, featuring an imported and environmentally friendly Deuterium lamp that minimizes ozone inhalation. With real-time lamp monitoring, automatic wavelength calibration, and an SiO2 coated optical mirror to diminish external light interference, this device ensures reliable and precise operation. Its robust construction is complemented by a simple, elegant design with an easy-to-read LCD display. Capable of storing up to 200 programs, the MS-SP325-1000 facilitates efficient and effective workflow management, making it a critical tool for quality control in analytical testing across various sectors. Whether for medical laboratories, educational settings, or industrial applications, this spectrophotometer stands out as a requisite instrument for any conventional laboratory. INCLUDED: The MARSHALL Select MS-SP325-1000 Spectrophotometer, 325-1,100nm includes: - Tungsten Lamp - Deuterium lamp - 4 Place Cuvette Holder - 4 x 3.5ml Glass Square Cuvettes - 2 x 3.5ml Quartz Square Cuvettes - Dust Cover - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Speed range: 0 – 2.200 rpm Maximum permissible load: 6 kg Plate: 104 mm stirrer plate Dimensions (Wx (more)HxD): 126 x 80 x 140 mm Weight: 1.1 kg

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. CONSTRUCTION - Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. - Special insulation for high temperatures (800°C) with high density 300 Kg/m3 calcium silicate and mineral fiber panels (Fibroceramic free) fixed with ceramic adhesives. - Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CARATTERISTICHE - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass plug. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges AUTOMATIC FIRE EXTINGUISHER The automatic fire extinguishing system works by detecting the presence of fire and controlling the discharge of extinguishing media so that the damage caused by the fire is minimized. The automatic extinguishing system includes a fire detection system, an extinguishing control unit and condensed aerosol generators. Information on the front panel display facilitates programming and simplified use. The possibility of programming the delayed activation of the sirens, or the time and duration of the extinguishing system make the unit very efficient and flexible. HOW DOES IT WORK? In the event of a lithium battery fire, the automatic fire extinguisher suppresses the fire and neutralizes the decomposition products of the electrolyte such as Hydrogen fluoride (HF), forming stable products such as KF and KHF2. The neutralizing action prevents the formation of highly flammable gases, such as hydrogen (H2), bringing the internal temperature down below the threshold necessary for a new fire to break out. Constituent parts of the fire fighting system: - LPCB certified according to EN 12094-1 and EN54.2 and 4 - Fire detection and automatic extinguishing - Graphic display 128 x 64 pixels - Fire extinguisher button on front of unit - Key switch for switching off mode selection: manual only or manual and automatic - 3 siren outputs - Power supply with 3A - Low absorption at rest: only 40mA - Inputs and outputs for remote function control - Extinguishment stop button and extinguishing cancel button - Storing of data events - RS-485 for remote connection In the image the focus on the internal FBN fire extinguisher. Recommended accessories: - Charging points: 4x10 sockets. Contact us for more information.

An additional anti-draft chamber dedicated for mass comparator APP.64.5Y.KO. It is intended for inst (more)ruments operating in unfavourable conditions (air movement, air gusts). The anti-draft chamber is installed on a weighing table, and a mass comparator is placed inside the chamber. The chamber features slidable side and top glass doors, thus ensuring free access to mass comparator’s weighing chamber. All components of the anti-draft chamber are made of metal and glass with conductive coating for eliminating influence of electrostatics on a measurement result.