Sensor Partners SP i-tec 2060 ll Infrared Temperature Controller

This listing is for a New Brunswick Innova U535 Ultra-Low Temp Freezer. The unit is in full working (more) condition and is ready for immediate release. The New Brunswick Innova U535 Ultra-Low Temperature Freezer is a high-performance laboratory freezer designed for storing sensitive medical and scientific materials at extremely low temperatures. Key features include: Ultimate Low Temperature: -86°C, ensuring precise temperature control and protection of samples from temperature-spiking damage Vacuum Insulation Panel Technology: Provides excellent space and power efficiency, allowing for up to 30% more storage capacity compared to traditionally-insulated lab freezers Cascade Refrigeration: Ensures consistent and reliable temperature performance. 3 Inner Compartments: Allow for organized storage and easy sample retrieval Manual Defrost or Automatic Defrost Options: Cater to different laboratory needs and preferences Technical Specifications Overall capacity: 18.98 cubic feet Power supply: 208/220V/60Hz Dimensions: External height: 1950mm External width: 800mm External depth: 867mm

New Brunswick Scientific Innova U725-G Ultra Low-Temperature Freezer Lab This item was removed from  (more)a university where it was surplus to requirement. It is in good cosmetic condition and powers on but shows power fail after 5 mins and will not run, therefore, it is listed as Spares/Repair.

Sanyo MDF-U5386S Ultra Low Temperature Freezer ULT It is in good cosmetic condition and powers on, w (more)e are unable to test it further at our facility. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition internally and externally.

Cambridge Stereoscan 200 SEM Scanning Electron Microscope This system was removed from a university  (more)where it was surplus to requirement. It is in reasonably good cosmetic condition. This item has not been powered on or tested further, therefore it is listed as Spares/Repairs.

A&D Weighing Gemini GR-202 Semi-Micro Dual Range Analytical Balance, 42/210 g, 0.01/0.1 mg Capac (more)ity 42 g / 210 g Readability 0.01 mg / 0.1 mg Repeatability 0.02 mg / 0.1 mg Features - Precision semi-micro balance with dual-range readability of 0.01 mg / 0.1 mg for high-accuracy applications requiring consistent, reliable results across a wide dual capacity range - Splash/Dust Proof Membrane Keypad - Easy to clean antistatic breeze break, ABS housing, and SS pan, spill ring, dust plate & base floor - Stable die cast aluminum base with built-in internal weight that performs automatic self-calibration - Easy to see large .7in (17.8mm) LCD display with simple 6 button keypad interface - Super visible front mounted spirit level bubble helps reduce leveling time and increase accuracy - One touch Full Digital Calibration (internal & external) ensures balance is calibrated onsite for the best performance - Space saving footprint and collapsible doors maximize valuable bench space and reduce breeze break mishaps - Handy step card and door control lever opens either side of the weighing chamber for quick and efficient access - Easy-click door lock joints enable user to quickly configure doors to fit weighing work flows The A&D Weighing Gemini GR-202 Semi-Micro Dual Range Analytical Balance, 42/210 g, 0.01/0.1 mg, is crafted for precision and ease of use, equipped with advanced features tailored to meet the demands of diverse laboratory environments. With dual capacities of 42 g and 210 g, and an impressive readability of 0.01 mg in the lower range and 0.1 mg in the higher, it ensures exceptional precision for critical measurements. Its splash and dust-proof membrane keypad, along with a robust die-cast aluminum base, provides durability and stability. The built-in internal calibration weight enables automatic self-calibration, ensuring consistent accuracy. A large 0.7-inch LCD display and straightforward six-button keypad interface make the balance easy to read and operate, while the front-mounted spirit level bubble helps users quickly achieve accurate leveling. With an anti-static breeze break and ABS housing, along with stainless steel components such as the pan, spill ring, and base floor, the Gemini GR-202 is designed for easy maintenance and long-lasting performance. The compact footprint and collapsible doors save valuable bench space and reduce accidental mishaps, while easy-click door lock joints allow users to adjust the chamber for convenient access and workflow efficiency. The Full Digital Calibration function supports both internal and external calibration, allowing quick, reliable calibration on site for peak performance. For data management, this model includes a memory function to store up to 200 weighing data records and complies with GLP/GMP/GCP/ISO output standards. Connectivity options include bi-directional RS-232C, and with the underhook for below-weighing applications, the Gemini GR-202 adapts to various tasks with precision. Supported by a 5-year warranty, this balance ensures reliable performance for your lab’s most critical measurements. INCLUDED: The A&D Weighing Gemini GR-202 Semi-Micro Dual Range Analytical Balance, 42/210 g, 0.01/0.1 mg includes: - Weighing Pan - Fine Range Breeze Break Ring - Dust Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Adam Equipment EAB 125I Equinox Semi-Micro Analytical Balance, 62g/120g, 0.01mg/0.1mg Capacity 62g  (more)/ 120g Readability 0.01mg / 0.1mg Repeatability 0.03mg / 0.2mg Features - Large, responsive 5’’ 800x480 pixel touch-screen display - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Security slot for optional Kensington-type lock and cable to help prevent theft - Large, grade 304 stainless steel pan allows easy cleaning - RS-232 interface provides speedy connection to computers and printers - USB host for memory card - Built-in memory for storing products and settings - External calibration allows for verification and adjustment with weights ("I" models feature internal automatic calibration) - Selectable digital filtering helps minimize effects of vibration and disturbances - Security password control prevents unauthorized access - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Preset tare function speeds the process of repetitive weighing - Parts counting with freely selectable sample sizes - Multilingual display allows use in many different countries - Memory accumulation totals results - Check weighing with audible alarm The Adam Equipment Equinox Analytical and Semi-Micro Balances deliver remarkable precision to labs that perform highly detailed testing. The Equinox is ideal for research and quality assurance facilities; science education; precision counting; and production and manufacturing applications needing exceptionally precise results. Eight analytical models offer capacities from 120g to 510g and 0.1mg readability. A color touch screen display provides intuitive operation, with icon-driven menus and readily accessible applications and functions. The five-inch screen is generously sized, offering 800 X 480-pixel resolution for excellent visibility. INCLUDED: The Adam Equipment EAB 125I Equinox Semi-Micro Analytical Balance, 62g/120g, 0.01mg/0.1mg includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

450-GC Gas Chromatograph + 240-MS Mass Spectrometer Included: Combipal CTC Analytics MXY 02-01B VARI (more)AN DS 102 vacuum pump, reference: 1101006424 Accessories Without Software Without a computer Device stopped at the beginning of 2024 Year of manufacture: 2009

Mackey Bowley Diffusion Bonder, Cheltenham Induction Heating & Edwards E2M80. The system was rem (more)oved from a University Lab as surplus to requirements. This system powers up and is in good cosmetic condition, we are unable to test it further at our facility. Mackey Bowley Diffusion Bonder.Serial No. S9638/91Chamber Dimensions: L 58cm x W 38cm x H 38cm.Bed Dimensions: L 80cm x W50cm.Fitted with: Oerlikon Leybold Vacuum Thermvac. Type: TTR91. Serial No. 230035.Edwards Speedivalve.Edwards Speedivac Oil Defussion Pump. Model: 403A. Serial No. 1981.Eurotherm Controller Type 815 & 818 Installation Manual. Stenhoj Hydraulik 60 Ton.Type: 500414.Serial No. 63153.Model Year: 1991. Cheltenham Induction Heating Ltd.Type: TRI 12.Serial No. TRI2017. Instron Control Panel.Model: 1342.Serial No. H2003.Fitted with: Edwards Pirani 11 & Display One Single Channel Vacuum Display.Display One Single Channel Vacuum Display Manual. Edwards High Vacuum Pump.Model: E2M 80.Serial No. 995.Comes with: Edwards Backing Roughing Valve. Model: BRV25PK. Serial No. 02011 & Instruction Manual.

Livestock scale H315/4I series is used to fast and precise determination of mass of cattle and swine (more) with possibility of multiple tarring in all measuring range. The weighing process is carried out with closed entering gate. Barrier height is dependent on the weighing platform dimensions. The scale features an indicator PUE H315 series in stainless steel housing. The indicator comprises a LCD backlit display and function buttons. The platform and the indicator are connected with a long cable for easy mounting of the indicator on a wall. Special software with various dampening filters enables stable and precise mass readout even if the animals are moving on the platform. An optional solution is a scale for measuring all herd of cattle.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

HX7 HR scale’s multi functions The HX7 HR scale is a device comprised of AISI 304 (IP66 / IP68 (more)) stainless steel terminal the PUE HX7, and AISI 316 (IP 68 / 69K) stainless steel weighing platform. The HX7 HR has been designed to operate in challenging conditions, even in places where the platform is exposed to acids. Display The 7” colour graphic display and the diode bar graph, which signals current net weight of a load in reference to the scale range or declared min, max thresholds, boost comfort especially in case of piecework where fast and precise presentation of product mass deviation is required with regard to the limit values. Hermetic communication interfaces Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Software The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Adam Equipment PMB 53 Moisture Analyzer, 50g, 0.001g/0.01% Capacity 50g Readability 0.001g / 0.01%  (more)Weighing Units g, %M, %S, ATRO %M, ATRO %S Features - Vivid, backlit LCD easily visible in any lighting conditions - Programmable backlight can be set to "always on," "always off" or "light only when weighing" - Capacity tracker built into display for easily monitoring possible overloads - Scratch-resistant aluminum housing protects internal components - Color-coded keys facilitate quick recognition of the most frequently used buttons - Pan lifter allows easy placement and removal of samples - RS-232 interface provides speedy connection to computers and printers along with a USB host for memory card and USB I/O interface - Temperature range 50°C to 160°C in one-degree increments - Three settings for heating samples include ramping, stepped temperatures and single temperatures - Seven preset drying modes allow test routines for several products - Audible overload alarm warns when capacity is exceeded - Testing can be set to start automatically when lid closes - Calibration for temperature and weight - Multilingual display permits use in various regions - Quick and easy configuration using the keypad - Zero-tracking feature ensures display returns to zero reading - Internal memory stores 49 different recipes and up to 99 test results, while additional test results and settings can be stored on a flash drive - Security slot for optional lock and cable to help prevent theft With simple operation and rapid response time, the Adam Equipment PMB Moisture Analyzers offer the top value in their class. The automatic test-setting function enables easy recall for frequent testing of the same items without additional user programming. USB and RS-232 interfaces provide computer and printer connections to store test programs and results. There is no need for additional software to take readings, giving users total freedom to collect data on a production floor or in the field. A single 400-watt halogen bulb heats samples in 1 °C selectable increments. Three heating options give users the flexibility to customize test methods and temperatures for different materials. The PMB Moisture Analyzers can be used to accurately determine the moisture content in food samples, oils and creams. These analyzers are suitable for cosmetics, agriculture, food testing and science laboratories. INCLUDED: The Adam Equipment PMB 53 Moisture Analyzer, 50g, 0.001g/0.01% includes: - Pan Support - Stainless Steel Lower Chamber Insert - Sample Pan Lifter - 10 x Sample Pans - RS-232 Interface Cable - USB to PC Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty