Gasmet FT-IR Gas Analyser Spectrometer Model - DX4030 Lab

Dräger X-am 5100 Gas Analyser Lab This item was removed from a university where it was surplus to re (more)quirement. It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility. This item includes the charging dock and additional Type E, Type I and Type A plug fittings.

NST Emission AnalyserModel: Emission AnalyserSerial#: 3320-10/3 This was removed from a university l (more)ab where it was surplus to requirements. It is in good cosmetic condition but would not pair with the PC and software from another system, so it is assumed faulty and therefore it is sold as Spares or Repairs.

ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab This item was removed from a  (more)university where it was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility. The gas leak detection kit contains the following items: 1 x main D16 detection unit1 x ATI H2O2 sensor1 x H10 Sensor Keeper 00-09811 x Sampling Wand for localised detection2 x Tenenergy 10,000 mAh NiMH rechargeable batteries1 x Intellicharger Newi2 charger with power cable1 x Dwyger Instuments Minimaster flow meter1 x 1/4" straight connector1 x USB cable1 x hard carry case

Servomex Analyser Series 1400 CO2 Analyser This was removed from a university lab where it was surp (more)lus to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with minor marks from use. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

Servomex Analyser Series 1400 CO2 Analyser Lab This item was removed from a university where it was  (more)surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Also includes user manual.

Servomex 1440 Gas Analyser Double Twin Unit This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up but we were unable to test it further at out facility. It is in good cosmetic condition with minor marks from use.

THE TOP MODEL OF THE 5 SERIES Ideal for laboratories requiring precise sample temperature control an (more)d maximum reproducibility. The AREX 5 Digital magnetic stirrer is a beautiful instrument with a dual digital display for thermoregulating samples with an accuracy of ± 1.0 °C. Thanks to the VTF system then, it will be possible to achieve an accuracy of ± 0.5°C. Pt100 and Pt1000 probes are also available as an option. RESISTANCE, SAFETY AND PERFORMANCE The plate of the AREX 5 Digital Velp model is IP42 certified and is made of aluminum alloy coated with a ceramic layer, which guarantees protection from scratches and chemical agents, making it very resistant and easy to clean. It is therefore preferred in laboratories where acids, bases and solvents are used. Safety circuits and overtemperature protection guarantee complete protection for the operators. Two light indicators inform the user when the heating function is active. Even when the instrument is switched off, a safety message ('HOT') remains on the display until the plate temperature drops below 50°C. A further alarm will detect the presence of the probe. The plate structure and the insulating disc protect the internal parts and ensure high resistance to the most demanding laboratory environments and applications, for example when working with cold fluids (below 0°C). AREX 5 is designed to last over time and like most Velp products it is guaranteed for 3 years. THERMOREGULATION When a temperature probe is connected, it is possible to choose 2 different thermoregulation modes to satisfy all laboratory needs: - FAST: the set temperature is reached quickly - FINE: the set temperature is reached more slowly, minimizing the overshoot SHAKING AREX 5 is equipped with a powerful brushless motor for daily applications, being able to agitate up to 20 liters (H2O). It is also equipped with SpeedServo™ technology, which allows the speed to be kept constant even when the viscosity of the sample varies. The combination of the powerful brushless motor and the strong magnetic coupling ensure homogeneous stirring, even in the peripheral areas of the plate, guaranteeing a constant speed in all positions. DESIGN The compact, innovative and attractive design offers comfort and safety both during benchtop applications and in laboratory fume cupboards. The inclination of the front panel is designed to optimize the user experience and the bright LED display allows easy reading and constant monitoring of the temperature and stirring speed. APPLICATIONS AREX 5 is the ideal solution for temperature sensitive applications in many industrial, research and academic laboratory sectors. THE AREX DIGITAL PANEL: BEAUTIFUL AND SIMPLE TO USE By turning the left knob it will be possible to adjust the temperature up to 310°C, while with the right one it will be possible to set the stirring speed from 50 to 1500 rpm. 1 - Aluminum alloy plate with ceramic coating 2 - Main switch 3 - Speed control knob 4 - Temperature control knob 5 - Display A - Probe led B - Temperature setpoint led La piastra riscaldante realizzata in alluminio con rivestimento in ceramica, conferisce: • Ottimale distribuzione del calore con una elevata potenza specifica grazie alla configurazione circolare • Ottima omogeneità di temperatura in tutti i punti della piastra • Elevata resistenza a fatica termica e shock termici • Elevata resistenza ad agenti chimici e abrasioni superficiali COMPARISON TABLE OF THE NEW VELP SERIES 5 MAGNETIC STIRRERS

A hardness tester according to the principle of “Brinell”, type Pessimetro S2, in combination with a (more) large surface table. The hardness of materials with a thickness of max. 10 mm. can be tested by means of 5 different (in size) pressure bodies with a fine adjustment of 100 gr – 20 kg. force can be applied. The size of the impression is measured digitally using a Mitutoyo 543-250B (in 0.001 mm.). The hardness of the material is then calculated in (kgf) and the area of the indentation. Compression bodies: 1.5 mm. / 11 mm. / 30 mm. Dimensions table (WxHxD): 40 x 8 x 55 cm. Weight: 40 kg.

Thermo Scientific TX-150 Swing Bucket Rotor The TX-150 is brand new and designed for use with Thermo (more) Scientific Sorvall ST 8, SL 8, and Hearaeus Megafuge 8 centrifuges. This swing bucket rotor supports speeds up to 4,500 RPM and RCF up to 3,260 x g, with a maximum capacity of 4 x 145 mL. Its versatile bucket and adapter selection ensure the TX-150 is an adaptable option for varying research applications. Please note, purchase of this product includes the rotor body only. Buckets are not included with purchase. INCLUDED: The Thermo Scientific TX-150 Swing Bucket Rotor includes: - Manufacturer's Documentation - 1 Year Full Parts and Labor Warranty Thermo Scientific TX-150 Swing Bucket Rotor SpecificationsMaximum Speed4,500 RPMMaximum RCF3,260 x gMaximum Capacity4 x 145mLMaximum Radius14.4 cmCentrifuge CompatibilityThermo Scientific Sorvall ST 8, Thermo Scientific SL 8, and Hearaeus Megafuge 8 Series Centrifuges