Thermo Applied Biosystems ABI 7500 Real-Time PCR System qPCR (2013) + Software

The Bax system is genetics based screening method that quickly and accurately detects target bacteri (more)a in raw ingredients, finished food products, environmental and water samples for fast accurate results. Through the polymerase chain reaction (PCR), the Bax system provides “yes-no” answers without the need for confirmationor expert interpretation of results. Tableted reagents provide minimal hands-on time using standard laboratory techniques in addition to accuracy, long shelf life and consistency. The Bax system cycler/detector provides even more ease of use through automated amplification and detection. Just load your samples and walk away. Electronic results that are clear, reliable and easily store are available in about four hours. Automated cycling, detection and analysis High capacity load of 96 samples per batch Single platform and protocol for all organisms allows testing for multiple targets in the same batch Electronic record of data for easy storage, retrieval and printing Pre-packaged PCR tablets have build-in control and ingredients to overcome PCR inhibition Excellent inclusivity and exclusivity for all targets No confirmation required Clear and reproducible results, independent of operator technique Minimal hands-on time using standard laboratory techniques Results as quickly as the day of sampling Performance meets or exceeds gel-based Bax systems Including software

The CFX96 Touch System is a powerful, precise, and flexible real-time PCR detection system. This six (more)-channel (five colors and one FRET channel) real-time PCR instrument combines advanced optical technology with precise temperature control to deliver sensitive, reliable detection for singlexplex or multiplex reactions. Quickly set up runs and monitor amplification traces in real time on the integrated LCD touch screen, or use the included CFX Maestro Software to easily and intuitively design your experiment and analyze results from a connected computer. With up to five-target detection, unsurpassed thermal cycler performance, unrivaled stand-alone functionality, and powerful yet easy-to-use software, the CFX96 Touch System is designed to advance your qPCR. Maximum ramp rate: 5°C/sec Average ramp rate: 3.3°C/sec Lid temperature: Heats up to 105°C Temperature range: 0 – 100°C Temperature accuracy (at 90°C): ±0.2°C Temperature uniformity (at 90°C): ±0.4°C, within 10 sec/well-to-well Gradient operational range: 30 – 100°C Gradient programmable span: 1 – 24°C Excitation: 6 filtered LEDs Detection: 6 filtered photodiodes Range of excitation/emission wavelengths: 450 – 730 nm Sensitivity: Detects 1 copy of target sequence in human genomic DNA Dynamic range: 10 orders of magnitude Scan time all channels: 12 sec Scan time FAM/SYBR Green only: 3 sec Sample size: 1 – 50 µl (10 – 25 µl recommended) Dimensions (WxDxH): 330 x 460 x 360 mm Weight: 21 kg

This Applied Biosystems ABI Prism 7700 Sequence Detection System  Model - 7700 was removed from (more) a university lab where it was surplus to requirements. The unit powers up but we were unable to test it further. It is in reasonable cosmetic condition but has marks from use. Pre-installation ManualPlanned Maintenance ProtocolSite Preparation & Safety Guide

Applied Biosystems 7500 Fast Real-Time PCR System Lab This system was removed from a university lab, (more) where it was surplus to requirements. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Also includes the following: - Real-Time PCR Systems - Chemistry Guide - Applied Biosystems Site Preparation Guide - Applied Biosystems Getting Started Guide - Allelic Discrimination Guide - 7500 Fast Real-Time Software V1.4 - MicroAmp Adhesive Film

Applied Biosystems QuantStudio 12K Flex Accufill System This was removed from a university lab where (more) it was surplus to requirements. The powers up but has not been tested further at our facility. The lab confirmed that it was in working order before it was put into storage. It is in excellent cosmetic condition with marks from use. Included with it are;1x Box of Open Array 384 well sample plates (opened)Part no. 440694710Pk The plates are still inside a sealed bag and are in good cosmetic condition. 1x Open Array Acufill User guide:The unit is in good cosmetic condition and appears to be complete.  Cables: 2x USB A to USB B cables:The units are in good cosmetic condition. 1x Blue ethernet cable:REV C 4379889

Skalar San++ System Automated Wet Chemistry Analyser System Lab This system was removed from a unive (more)rsity where it was surplus to requirement. The main unit does not power on, therefore we are unable to conduct any test. Listed as Spares/Repairs. Includes PC with the following software installed:Flowaccess V3.Includes the following:-Skalar SanPlus-2 x Skalar Back Pressure Regulator 5530 -Skalar Temperature Control 5540 -Skalar Manifold 21530919-Skalar Manifold 21530917-Skalar PS-4 Power supply-PC with relevant software: Flowaccess V3.

Genlab SP/LCI/320/SS/DIG Laboratory Incubator This was removed from a working lab where it was surp (more)lus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with minor marks, including a dent in the back panel. 6 Shelves - 51 x 50cm

Frame intended for 4-load-cell powder-coated scales C11, that are to be embedded in the ground.

Julabo FT400 Immersion Cooler, 115V/60Hz Working Temperature Range -40°C to 30°C Refrigerant R449A  (more)Fluid Type Water, Silicone, Fluorinert/Galden Features - Rapid cooling of liquids down to low temperatures - Counter-cooling of liquids in combination with heating circulators - Environmentally friendly by saving precious tap water - User-friendly operation and handling - Compact design, small footprint - Dry ice substitution JULABO Immersion Coolers provide counter-cooling when connected to a heating circulator or rapidly cool fluids down to a low temperature. With easy operation the units are suitable for a variety of cooling applications. Units are an alternative to cooling with dry ice or tap water. The FT200, FT400 and F900 units simply turn on and the probe cools. Models FT402, FT902 and FT903 include an external Pt100 sensor and display for input of temperature set point. The FT200 has a 9 cm long x 4 cm diameter cooling dumbell. The FT400 / FT402 have a 12 cm long x 5 cm diameter cooling dumbell. The FT900 / FT902 have a flexible cooling probe 65 cm long / 1.5 cm diameter. The FT903 has a solid coil 2.2″ high and 5.5″ diameter. INCLUDED: The Julabo FT400 Immersion Cooler, 115V/60Hz includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Boekel Scientific 145702 Illuminated Tissue Bath, 115V Temperature Range Ambient + 5°C to 65°C Stab (more)ility ± 1°C Certification UL61010-1, CSA C22.2 Features - Precision temperature controlled water bath eliminates wrinkles and distortion during preparation of paraffin embedded tissue sections - Digital Microprocessor Control with advanced safety over temperature protection - L.E.D. illuminated black background with transparent PYREX® dish; allows specimen to be easily seen - A nonvolatile memory retains the last temperature set point after power off/on - Supplied with a removable PYREX® dish - 2 year warranty - Units are certified to UL61010-1, CSA C22.2 and CE approved The Boekel Scientific 145702 Illuminated Tissue Bath is a Digital Microprocessor Control laboratory tissue bath with advanced safety over temperature protection. Bright white LED's illuminate the basin for optimal tissue placement.INCLUDED: The Boekel Scientific 145702 Illuminated Tissue Bath, 115V includes: - Pyrex Dish - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty