Dräger Pac III Sensor Einzelgasmonitoren Gas Monitor 0…25%

Servomex Analyser Series 1400 CO2 Analyser This was removed from a university lab where it was surp (more)lus to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with minor marks from use. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab This item was removed from a  (more)university where it was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility. The gas leak detection kit contains the following items: 1 x main D16 detection unit1 x ATI H2O2 sensor1 x H10 Sensor Keeper 00-09811 x Sampling Wand for localised detection2 x Tenenergy 10,000 mAh NiMH rechargeable batteries1 x Intellicharger Newi2 charger with power cable1 x Dwyger Instuments Minimaster flow meter1 x calibration t-fitting1 x filters1 x 1/4" straight connector1 x USB cable1 x hard carry case

Dräger X-am 5100 Gas Analyser Lab This item was removed from a university where it was surplus to re (more)quirement. It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility. This item includes the charging dock and additional Type E, Type I and Type A plug fittings.

Siemens Sitrans LG270 Radar Transmitter Type - LG270,AXHT01HXVDAX This was removed from a university (more) lab where it had been used as part of a larger rig. It has not been tested and has some of the rig attached. It is in reasonably good cosmetic condition but has marks from use.

Mass detector VARIAN Saturn 2000 for CP3800 Gas Chromatographs parts Without Software Without a comp (more)uter For parts

Manufacturer: Environics-IUT Model: ENVI-Air GC-IMS-Analyzer S/N: IM0911.120011 YoM: 2012 Descripti (more)on: The ENVI-Air from Environics is a continuously operating gas analyzer designed for ultra-low level detection of either single or multi-component hazardous gases in ambient air. It will operate indoor or outdoor in the harshest environmental conditions and needs little or no maintenance. The ENVI-Air can detect hazardous gases at far lower concentrations than traditional analyzers and react in real-time. This gives the operator a longer safe response window to take corrective action.It is based on GC-IMS technology. Ion Mobility Spectrometry (IMS) is a simplified atmospheric pressure time-of-flight technique that is highly selective with low ppb to % sensitivity. The GC-IMS adds multi-component separation prior to the IMS analysis. ENVI-Air does not require the use of paper tape, pre-concentrators or chemical reagents.The ENVI-Air is an industrial solution virtually drift free and unaffected by humidity or temperature changes and will be factory calibrated for the compounds of interest for maximum accuracy and reliability. Because of the simplicity of design and limited moving parts, ENVI-Air analyzers will have the lowest maintenance and downtime of any current analyzer system. Measurable Compounds: Ammonia, Acetone, Acrylonitrile, Acetonitrile, Arsine, Benzylchlorid, Bromine, Chlorine, Chlorocyane, BTX, CMME, Ethylene Oxide, Dibutylphthalat (DMP), Dimethylsulfat, HFPO, Hydrazin, Hydrogen Chloride, Hydrogen Bromide, Hydrogen Fluoride, Hydrogen sulfid, TDI, Methyl Bromide, Isopropyl alcohol, Methyl Iodide, Nitrogen dioxide, NMP, PFIB, Phosgene, Phosphine, PGME, PGMEA, Sulfur Dioxide, Triethylamine, Vinyl Chloride. Areas of application: - Oil and Gas Production- Plastics Manufacturing- Semiconductor Fabrication- Chemical Production- Pharmaceutical Manufacturing- Gas Pipeline Safety- Medical Sterilization- Primary Metal Processing Specifications: - Detection Principle: Gas Chromatography - Ion Mobility Spectrometry (IMS)- Ionization: Tritium (3H) No Licence or Wipe Tests Required- Sensitivity: Low ppb range- Moisture: 0% to 90% RH- Warm Up Time: 20 minutes- Measurement Time: Seconds- Power: 220 VAC/19VDC - Carrier Gas: No Carrier Gas Required- Operation Temperature: -10°C to +50°C- Storage Temperature: -40ºC to +50ºC - Enclosure: 19” Rack Mount- Power: 220 VAC/19VDC - Dimensions (L x W x H): 483 x 381 x 89 mm - Weight: 6.44 kg Items delivered: - Environics-IUT ENVI-Air GC-IMS-Analyzer- Instruction manual Condition: The item is in perfect coasmetic as well as operarting condition. It is 100% functional teasted and ready to be used.

Heating thermostat from 20 to 100°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - Transparent polycarbonate bath up to 100°C - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Graph of heating performance of ECO Silver immersion thermostats with polycarbonate bath. Performance graph of the pump pressing on the six levels.

Whitley VA500 Hypoxia Glove Box Workstation / Airlock with Foot Pedal This item was removed from a u (more)niversity lab where it was surplus to requirements. The glovebox and airlock are in very good cosmetic condition and powered on successfully.However, the temperature control display on the glovebox is non-functional. Therefore, further testing (i.e temperature testing) could not be conducted, and it is listed as Spares/Repair. Details: - Glovebox Serial No.: VA01TF - Airlock Serial No.: AV01TF

Julabo DYNEO DD-200F Refrigerated Circulator with Analog Output, 115V/60Hz (NRTL Certified) Refriger (more)ant R134a Working Temperature Range -20°C - 200°C Cooling Capacity 200W at 20°C Features - Powerful cooling machines - Suitable for internal and external applications - Optimized cooling coil design saves space in the bath tank - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces (optional) - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe DYNEO™ refrigerated/heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. Refigeration combinations afford low temperature capabilities from -20 °C to -50 °C with an upper temperature limit of 200 °C. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. A color TFT display with central rotary knob controller includes a multi-lingual interface, integrated programmer, Pt100 port for external temperature control, USB connection for external PC control and data-logging with digital options includin RS232 port or an analog module interface for voltage or current control. PID temperature control provides ±0.01 °C stability. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Stainless steel bath tanks with integrated drain port.Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo DYNEO DD-200F Refrigerated Circulator with Analog Output, 115V/60Hz (NRTL Certified) includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz