Zeiss Axioplan 2ie MOT Fluorescence Microscope w/ 4 Objectives (Neofl, Achrom)

Prior PX042 Compound Microscope With Four Objectives Lab This item was removed from a university whe (more)re it was surplus to requirement. It is in good cosmetic condition and in full working order. This microscope features: Four-position turret with the following objectives: E Plan 4 x / 0.10 -0.17E Plan 10 x Ph / 0.25 -0.17E Plan 40 x Ph / 0.65 -0.17E Plan 100 x Ph / 1.25 oil -0.17 Eyepieces: 2 x WF 10x/22

Leica DM2500 Confocal Microscope System w/ Application Suite X Software Lab This system was removed  (more)from a laboratory where it was surplus to requirements. The client has stated the following: "The systems are fully working and Leica still offer user support for the systems if the new owners so wish. "The system is in good cosmetic condition. All units power up and communicate through the included Leica Application Suite X software.However, there is no camera included, so microscope images cannot currently be viewed via the PC. The system consists of: - 1 x Leica DM2500 microscope - Fitted with: - 1 x Leica 1531144511 Stage - 1 x Leica 11504058 Lamp - 1 x Leica 15-6504-202 Light Supply - 1 x Leica 1531323 Mirror Junction Box - 2 x Leica 507802 HC PLAN 10x/20 Eyepieces - 1 x Leica 507902 ACS APO 10x/0.30 CS Objective - 1 x Leica 507900 ACS APO 63x/1.30 OIL CS Objective - 1 x Leica EL6000 BZ02 with Lightpipe (LCD screen may be faulty, lamp timer not functional) - 1 x Leica TCS SPE Laser Head with Leica Supply Unit RGBV - 1 x Life Imaging Services 'the box' environmental chamber (with 2 x hoses) - 1 x Speirs Robertson Isolation Plate (75cm x 90cm x 5.5cm) - 1 x HP Z420 PC with 2 x Monitors, Keyboard & Mouse (running Leica Application Suite X 3.1.2.16221) - Includes Leica TCS SPE to SPE II USB licence stick

This item has just arrived in our stock. Please enquire for further details.

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

Motic PA53MET-BD-3D Trinocular Upright Industrial Microscope w/ Analysis Professional Software Suite (more) Objectives S-APO BD 5X, 10X, 20X, 50X Optical System Color Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Achieve precise 3D measurements with advanced Z-axis profiling and Motic’s Analysis Software. - Enjoy crystal-clear images with advanced Semi-Apochromatic objectives. - Wide field of view with 25mm WF10X eyepieces, leading the industry standard. - Work with ease using a 20° inclined trinocular head. - Color Corrected Infinity Optical System (CCIS®) for superior clarity. - Versatile magnification options with 5X, 10X, 20X, and 50X objectives. - Advanced ergonomic design, compact size, carefully sourced high-quality materials, and versatile digital capabilities ensure minimal operator fatigue during extended periods of operation. The Motic PA53MET-BD-3D is a top-tier trinocular metallurgical microscope designed for bright field observation with a 100W halogen lamp and an advanced reflected frame for 3D profiling, featuring a motorized Z-axis, a 3D control box, and a control pad. It includes widefield eyepieces offering 10X magnification and a 25mm field of view. The microscope's coded quintuple revolving nosepiece supports BD and includes a DIC slot. Equipped with Plan S-APO BD objectives (5X, 10X, 20X, 50X), it’s optimized for industrial quality control and analysis of opaque materials. INCLUDED: The Motic PA53MET-BD-3D Trinocular Upright Industrial Microscope w/ Analysis Professional Software Suite includes: - S-APO BD Objectives: 5X, 10X, 20X, & 50X - 10x/25mm Widefield Eyepiece - Moticam S6 - 0.5X X C-Mount Adapter - Motic Analysis Professional Software - Integrated ND6, ND25, and LB filters - 4x4 in. Stage - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

This listing is for a Qiagen Qiagility PCR Prep System.The unit is in full working condition and is  (more)ready for immidate realese.The Qiagen QIAgility Automated PCR Prep System provides users with a fully automated PCR setup, responsive software, and increased productivity. This compact, benchtop liquid handling robot eliminates the need for manual pipetting steps, with high precision and reproducibility. The Qiagen QIAgility uses Qiagen PCR kits and step-by-step guided software to automatically calculate all mixes and worktable set up so you won’t need to program pipetting steps. This PCR prep system uses a single-channel pipetting head with dynamic liquid level sensing and supports almost any kind of thermal cycler and labware.HEPA filter: Preinstalled dual-cartridge 3M Air-Mate HEPA (High-Efficiency Particulate Air) filter system provides positive pressure clean air within the closed hood.Liquid-level sensing: Minimum detection volume (10 µl in 200 µl PCR tubes). Only functional in combination with QIAGEN Conductive Filtered Tips.Pipetting head: Single-channelPrecision: CV <1%, 5–200 µl (dry-well transfer) CV <5%, 2–5 µl (wet-well transfer) CV <10%, 1 µlTable capacity:6 x SBS positions (127.76 x 85.48 mm) for adapters and Tip Rack Holders 1 x Master Mix Block 1 x Reagent BlockTip disposal:All used tips ejected externally — no waste accumulation on the worktableTip volume:1–200 µlUV lamp Preinstalled UV lamp for worktable decontaminationDeck Dimensions 19.5×14”Dimensions 21x25x18″Electrical 100–240 V AC, 250 VA, 50–60 HzWeight 90.2 lbEnvironmental Tolerances Operating temperature, 15–30 °C (59–86°F), Operating humidity: 40–70%

Stainless Steel Wire - set (1 mg - 500 mg) F2-class mass standards represent an impressive level of  (more)precision in mass measurement. Classified as metrology grade F2, they are recognized as top-quality tools suited for advanced applications where precision is a key element. F2 Class Mass Standards &ndash; Key Features Exceptional Measurement Precision - F2 class mass standards feature excellent measurement precision achieved through stringent standards for allowable deviation from actual weight. Stability under Dynamic Conditions - An important feature of F2-class mass standards is their ability to maintain measurement stability even under dynamic measurement conditions. They are designed to cope with a variety of factors that affect measurement precision. Calibration at the Highest Level - The calibration process of F2-class mass standards adheres to the most stringent norms and standards. This makes the standards of this class recognized as tools with the highest degree of accuracy, complying with international requirements. Use of Materials with Outstanding Properties - F2 class mass standards are often constructed from materials with outstanding physical properties. This ensures not only excellent precision, but also exceptional durability. The set includes: plastic box 12 mass standards 1 pair of tweezers 1 brush Material: stainless steel Application 1. Scientific Research at the Highest Level In scientific research, especially in fields that require the utmost precision, such as nuclear physics or astrophysics, F2 class mass standards are indispensable. 2. Metrology Industry In metrology laboratories engaged in testing and maintaining the most advanced measurement standards, F2 class standards are indispensable working tools. 3. High-Precision Testing Laboratories In laboratories specializing in research requiring the highest precision, such as forensic laboratories and materials testing, F2 class mass standards are essential. 4. Aerospace Industry In the precision mass measurements required in the aerospace industry, F2 class standards provide reliability and excellence. F2 class mass standards are the symbol of the highest precision in the field of mass measurement. Their use is crucial in the most advanced fields of science, industry and research.

Labconco 16-Port Drying ChamberThe 16-PortDrying Chamber includes 3/4" thick acrylic lid with neopre (more)ne gasket, 16neoprene valves that accommodate both 1/2" and 3/4" adapters forconnection of flasks, and one latching pin. Made of type 304 stainless steel.It is compatible with FreeZone 1, 2.5, 4.5, 6, 8, 12 or 18 Liter Freeze Dryers.DryingChambers provide a means to attach flasks to your freeze dryer or containsamples in bulk.INCLUDED: The Labconco 7522900 16-Port Drying Chamber includes: - Neoprene Valves x 16 (accomodates 1/2" &amp; 3/4" adapters) - 3/4" Thick Acrylic Lid with Neoprene Gasket - Latching Pin - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark H3710-HS Digital Hotplate Magnetic Stirrer, 10 x 10 inch, 115V Temperature Range 35°C to  (more)400°C Speed Range 150 to 1500 RPM Platform Dimensions 10 x 10 in (25.4 x 25.4 cm) Features - Large, 10 x 10-inch white ceramic top plate - Maximum stirring capacity 15 L - Digital speed and temperature control - Safety LED indicates hot surface - Control actual sample temperature (with optional probe) Benchmark Scientific Hotplates and Stirrers provide reliable performance and safe operation for everyday laboratory use. These 10” x 10” hotplates/stirrers feature a durable, chemical resistant white ceramic top plate and advanced microprocessor controls. The constant monitoring system provides precise control of temperature with rapid heating and faster boiling times. In addition, the powerful motor drive system ensures efficient mixing in larger and more viscous samples.Temperature and mixing speed can be viewed on the large digital display and a safety LED illuminates when the top plate temperature exceeds 50°C. An external temperature probe (optional accessory) can also be used for applications that require precise control of sample temperature. The probe would provide direct feedback to the microprocessor with constant monitoring and adjustments for maintaining the selected temperature in the sample within +/- 1°C. All models are compatible with borosilicate glass beakers and other vessels up to 20 liters (15 L maximum stirring volume). An optional clamp assembly (H3770-CS) is available for mounting thermometers, temperature probes, etc.INCLUDED: The Benchmark H3710-HS Digital Hotplate Magnetic Stirrer, 10 x 10 inch, 115V includes: - Power Cord - Operator’s Guide - Manufacturer's Documentation - Two Year Manufacturer's Warranty

Temperature range: -10°C to +50°C Temperature fluctuation: ±1°C (ON-OFF control), ±0.2°C (PID contro (more)l) Temperature uniformity: ±0.5°C (set 37°C, ambient 20°C, no load) Temperature program operation: 3-steps, 0.5 hr ~ 99.5 hr 1-99 repeating, or unlimited Capacity: 126 L Dimensions (HxWxD): 1020 x 700 x 600 mm Inner dimensions(HxWxD):  555 x 620 x 390 mm Weight: 69 kg