KNF IP65 UFEM 1.10 ST.18S2 Liquid Pump

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This item has just arrived in our stock. Please enquire for further details.

Hoefer GD2000 Vacuum Gel Drying System w/ Vacuum Pump Max. Gel Dimensions (W x L) 33 x 44 cm Heater (more) Output Power 800 W Ultimate Pressure VP200 Vacuum Pump 9 mbar Features - Rapid and even gel drying with a dry-heat vacuum method - Thermostatically controlled 800W heater for consistent operation - Independent 575W pump outlet for efficient vacuum performance - Complete system includes GD2000 Gel Dryer, VP200 Vacuum Pump, and all essential accessories - Indoor operating conditions: 15-40°C with humidity up to 80% for 15-31°C, reducing to 50% at 31-40°C - Stainless steel screen and porous polyethylene cover sheet for effective gel drying - Complies with EN61010-1, UL61010A-1, CSA22.2 1010.1, and CE safety certifications The Hoefer GD2000 Vacuum Gel Drying System w/ Vacuum Pump provides a fast, efficient, and safe solution for drying gels through a dry-heat vacuum method. This system ensures rapid and even drying with minimal risk of gel distortion or cracking. Equipped with a powerful, thermostatically controlled 800W heater, the GD2000 maintains consistent temperature levels to achieve high-quality results. The complete system includes the VP200 Vacuum Pump, stainless steel screen, porous polyethylene cover sheet, Mylar® and cellophane sheets, and other essential accessories for effective and reliable operation. Designed for indoor use within a 15-40°C temperature range, the GD2000 is compatible with high humidity environments up to 80% (gradually decreasing to 50% at 31-40°C). Built with safety in mind, this system meets EN61010-1, UL61010A-1, CSA22.2 1010.1, and CE safety standards, making it a durable and compliant choice for precise gel drying needs. INCLUDED: The Hoefer GD2000 Vacuum Gel Drying System w/ Vacuum Pump includes: - Silicone Rubber Overlay Sheet - VP200 Vacuum Pump - Stainless Steel Screen - Porous Polyethylene Cover Sheet - Vacuum Tubing–3 m - Porous Cellophane–50 sheets - Mylar® Cover Sheet - Filter Paper–10 sheets - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Polyscience CA10A3T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C 2900W 230VACFeatures -  (more)Large, full-color touchscreen display with intuitive interface and support for five different languages - Compact, portable design takes up less floor space - Cooling at ambient temperatures as high as 30°C - Choice of pumps and compressor size - DynamicFilter™ self-cleaning filter system - Front fill reservoir - Liquid level monitoring to prevent pump failure - Ultraviolet anti-biological light system - User-adjustable temperature, pressure, and flow rate alarms - Heat up to 70°C, without additional options; ideal for applications, such as lasers, that must be brought to a temperature above ambient before operation can begin - External temperature tracking and communications capability (optional) - Cool Command™, WhisperCool® Your browser does not support iframes.*3D model is solely for visualization and may not depict the actual appearance of your product. DuraChill® is preprogrammed to change its own air filter once a month for a two year period and can be adjusted to suit your operating environment. DuraChill Chillers offer a conveniently located front fill reservoir. You no longer have to go to the back of the chiller top open to fill the reservoir. These high-performance chillers utilize Polyscience's exclusive patent-pending Whispercool noise reduction system. Stableand reliable cooling for many common heat removal applications, including laseretching, AA furnaces, ICP, rotary evaporators, vacuum systems, reactionvessels, plasma etching, and condenser cooling. Click Here to View Product Video INCLUDED: The Polyscience CA10A3T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C 2900W 230VAC is brand-new . Includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience CA10A3T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C 2900W 230VAC SpecificationsPart NumberCA10A3T1-41AA1NCooling Capacity @ 20°C2.9 kWCooling Capacity @ 10°C1.93 kWCooling Capacity @ 0°C1.0 kWFluid Temperature Range-10 to 70°C / 14 to 158°FTemperature Stability±0.1°CTemperature Display Units°C or °FDisplayable Pressure UnitsPSI or kPaPump Inlet and Outlet½ inch female NPTConnectivityRS-232, USB Serial Port Emulation, USB TMC, Dry Contact On/Off/StatusPump Pressure Range20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate3.5 gpm / 13.2 lpmPower Requirements230V, 60HShipping Weight177 lbs / 80.3 kgShipping Dimensions33 x 22 x 33 in / 84 x 56 x 84 cmComparison of ModelsSpecificationPolyscience CA02A1P1-41AA1NPolyscience CA02A1T1-41AA1NPolyscience CA03A1P1-41AA1NPolyscience CA03A1T1-41AA1NPolyscience CA05A1P1-41AA1NPolyscience CA05A1T1-41AA1NPolyscience CA10A3P2-41AA1NPolyscience CA10A3T1-41AA1NCooling Capacity @ 20°C (kW)0.85 kW0.85 kW1.4 kW1.4 kW1.74 kW1.74 kW2.9 kW2.9 kWCooling Capacity @ 10°C (kW)0.6 kW0.6 kW0.99 kW0.99 kW1.29 kW1.29 kW1.93 kW1.93 kWCooling Capacity @ 0°C (kW)0.4 kW0.4 kW0.53 kW0.53 kW0.77 kW0.77 kW1.0 kW1.0 kWFluid Temperature Range (°C/°F)-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°FPump Pressure Range (psi/kPa)45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate (gpm/lpm)2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpmPower Requirements (Voltage/Hz)120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz230V, 60Hz230V, 60Hz.comparison-table tr td:nth-child(9) { background-color: #fffacd; }

Heidolph Single-Channel Pump Head SP Vario Features: Suitable for most Heidolph tubing due to adjust (more)able roller spacing Convex rollers do not squeeze or crush organic cell cultures Pump head features ball bearings Rollers made of stainless steel and aluminum Depending on drive and tubing, the flow rate ranges from 2.0 to 4,151 ml per minute Click Here to View Product Video INCLUDED: The Heidolph Single-Channel Pump Head SP Vario includes: - 3 Year Manufacturer's Warranty

ClipTip 12.5 THERMO SCIENTIFIC pipette tips Reference: Clip Tip 94410040 Without filter Packaging: 5 (more) x 96 tips / insert (refill tower) Volume (metric): 12.5 μl Expiry date: 12/2021 Quantity available: 13

Manufacturer: Eppendorf     Model: 5702 + swing-out A-4-38 rotor Description: The Eppendorf 5702 Cen (more)trifuge is a powerful laboratory centrifuge for the separation of various samples. With its compact design and a maximum speed of 4,400 RPM (revolutions per minute), this centrifuge is ideal for a variety of applications in research, clinical and industrial laboratories. The Eppendorf 5702 Centrifuge has a rotor with a capacity of 4 x 100 mL or 30 x 1.5/2 mL tubes, allowing flexibility for a wide range of sample sizes. The centrifuge also features an intuitive control panel with a user-friendly interface for easy operation and a variety of programmable functions for customised runs. Key features: - Very compact footprint that fits on any lab bench - Low step-in height for easy loading and unloading of samples - "At set RPM" function starts the timer when the selected speed is reached for reproducible centrifugation runs - Stainless steel housing and pipette holder ensure stability and durability Technical data: Max. Max. speed: 3,000 x g (4,400 rpm) Dimensions (W x D x H): 32 x 40 x 24 cm Weight: 20 kg Eppendorf oscillating bucket rotor: A-4-38 Maximum speed: 4400 rpm / max 4x400g The device/system offered here has been tested and is fully functional and ready for use.

The DTP tablet presses benefit from the simple adjustment of all key parameters, low noise, and safe (more) operation. They are compact machines that are light in weight for their class yet apply a hefty 50 kN of pressure to produce top quality, pharmaceutical grade tablets that are highly consistent in weight. Thanks to their feeder mechanisms, these tablet presses are extremely efficient in their use of raw materials. The DTP 25 is capable of producing 3,600 per hour, with a maximum diameter of 25 mm. Designed for pressing dry powders and granular material into tablets, these tablet pressing machines are widely used in the pharmaceutical, chemical, electronic, foodstuff and other industries, and represent a cost effective solution for any application that requires moderate quantities of high quality tablets. Dies: 1 Maximum diameter of tablet: 25 mm Maximum pressure: 50 kN Maximum depth of fill: 20 mm Max tablets per hour: 3,600 Tablet thickness: 8 mm Dimensions (WxDxH): 580 x 500 x 830 mm Weight: 226 kg