Olympus BX61 Microscope System w/ 1 x Objective UPlanApo 40x/1,00 Lab

This item has just arrived in our stock. Please enquire for further details.

This Hitachi S3000H SEM Scanning Electron Microscope is being sold on behalf of a laboratory. It is  (more)surplus to requirements. The lab informed us that it was working when last used. The microscope is from 1998, has one SE2 Detector. Included are the following; Hitachi S3000H SEM Scanning Electron Microscope LabModel: S-3000HDate: 9/8/12Part#: 50E-G386Serial#: 1014-30 System specifications- 0.3 - 30kV acceleration voltage range- 5 nm resolution at 25kV in variable pressure mode- 150mm diameter maximum specimen size- Dual-bias for low voltage signal noise- Backscatter mode Canatron Transformers EN 60742 Transformer Model: EN 60742Serial#: CT6699 Hitachi CM751ET MonitorModel: CM751ETSerial#: G8E008620 Hitachi CM751ET MonitorModel: CM751ETSerial#: T9A 012253 Hitachi S3000H SEM Control PanelSerial#: 1014-30 Edwards Oil Mist Filter EMF20Serial#: A 462 29 000 Hitachi Measure Function Setup Disk V 01-05Serial#: 50E-5497 Hitachi SEM Data Manager Setup Disk V 01-05Serial#: 50E-5502 Hitachi S-3000Series V 10-16 CD Disc 1 & 2Serial#: 50E-8108 Hitachi PC-SEM Restore CD Disc 1 & 2Serial#: 1014-30 Adaptec SCSI Select v2.57.4 Floppy DiskSerial#: 1492920-00 Adaptec AVA-2915LP/2930LP v1.13 Floppy DiskSerial#: 1495022-00JA HP Operating System DVDSerial#: 483886-B21 Contec Drivers Software COM Setup Disk v.1.8Serial# LYBM994 HP Compaq Business PC Documentation and Diagnostics DVDSerial#: 490849-B21 HP Operating System DVDSerial#: 394378-002 HP Operating System DVDSerial# 486467-B22 HP Restore Plus! DVD Serial#: 481206-B25 Roxio Creator Business 10 DVD Serial#: 498164-B21 S300H Printed Circuit Board Model S-3000H SEM Instruction Manual Serial#: 50E-9247-9 Hitachi S-Type FilamentsDate: 08.06.201Lot#: 0490228080Serial#: 777-0179

Leica DMIL Inverted Microscope Type 090-135.001 This was removed from a university lab where it was (more) surplus to requirements. The unit powers on and is in working order. The focus knob is quite stiff but the fine adjustment works as intended. It is in good cosmetic condition with minor marks. Includes: -Leica ∞/-/ C PLAN L 10x/0.22 PH 1 (506078)-Leica ∞/0-2 C PLAN L 20x/0.30 PH 1 (506152) 2 x Eyepieces:-Leica 10X/18 (527000)-Leica 10X/18 M (527001)

This item has just arrived in our stock. Please enquire for further details.

Motic PA53MET-3D Trinocular Upright Industrial Microscope w/ Analysis Professional Software Suite Ob (more)jectives S-APO 5X, 10X, 20X, 50X Optical System Color Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Achieve precise 3D measurements with advanced Z-axis profiling and Motic’s Analysis Software. - Enjoy crystal-clear images with advanced Semi-Apochromatic objectives. - Wide field of view with 25mm WF10X eyepieces, leading the industry standard. - Work with ease using a 20° inclined trinocular head. - Color Corrected Infinity Optical System (CCIS®) for superior clarity. - Versatile magnification options with 5X, 10X, 20X, and 50X objectives. - Advanced ergonomic design, compact size, carefully sourced high-quality materials, and versatile digital capabilities ensure minimal operator fatigue during extended periods of operation. The Motic PA53MET-3D is an advanced trinocular metallurgical microscope designed for bright field observation with a 100W halogen lamp and a sophisticated reflected frame for 3D profiling. It features a motorized Z-axis, a 3D control box, and a control pad, along with widefield eyepieces offering 10X magnification and a 25mm field of view. The coded quintuple revolving nosepiece supports bright field observation and includes a slot for Differential Interference Contrast (DIC). Plan S-APO objectives are available in magnifications of 5X, 10X, 20X, and 50X. INCLUDED: The Motic PA53MET-3D Trinocular Upright Industrial Microscope w/ Analysis Professional Software Suite includes: - S-APO Objectives: 5X, 10X, 20X, & 50X - 10x/25mm Widefield Eyepiece - Moticam S6 - 0.5X X C-Mount Adapter - Motic Analysis Professional Software - ND6, ND25, and LB filters - 4x4 in. Stage - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

This was removed from a university lab where it was surplus to requirements. The unit does not power (more) up. It is sold for spares/repairs

8 x X-pendable Filter Cartridges These items were removed from a university lab, where they were sur (more)plus to requirement. Seven come brand new and boxed, and one is unboxed but still sealed and unused. - Filter No.: X29622 - Fit: 26455/PAS-9

Eppendorf 8 x 7-18ml Adapters, Cat. # 022638327 The Eppendorf 8 x 7-18ml Adapters, Cat. # 022638327  (more)are for use with the Eppendorf A-4-62 Swing Bucket Rotor for the Eppendorf 5804/R and 5810/R Centrifuges. These adapters feature a capacity for 8 x 7-18ml round bottom tubes each with the maximum tube dimensions (Diameter x Height) of 20mm x 126mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 8 x 7-18ml Adapters, Cat. # 022638327 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 8 x 7-18ml Adapters, Cat. # 022638327 SpecificationsBottom ShapeFlat with Rubber MatRotor CompatibilityEppendorf A-4-62 Swing Bucket Rotor

Yamato FO-410CR Muffle Furnace with Communication Port 9L, 220V Operating Temperature Range 100°C t (more)o 1150°C Max. Temperature Reaching Time ~70min. Internal Capacity 9L Features - Easy-to-use controller - Communication ports - High-temperature accuracy at ±2.0°C - Upgraded with long life R-thermocouple sensors - Excellent heat tightness with a firmly sealed chamber door - Program operation of a maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns, or 10 steps x 3 patterns - Self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker, and automatic overheat prevention device Standard 9L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options include exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded with long life R-thermocouple sensors. Designed with communication port. Temperature range: 100~1150°C. INCLUDED: The Yamato FO-410CR Muffle Furnace with Communication Port 9L, 220V includes: - Exhaust port cap 1 pc. - Power Cord - Operator's Manual - Manufacturer's Documentation - Year Manufacturer's Warranty

F2 Mass Standard - knob weights with adjustment chamber - set (1 g - 500 g), plastic box Number of p (more)ieces in the set: 12 weights 1 g i 2 g – solid masses without adjusting chamber