Zeiss Axio Observer 3 Inverted Microscope w/ 3 x EC Plan-NEOFLUAR Objectives

Leica DMIL Inverted Microscope Type 090-135.001 This was removed from a university lab where it was (more) surplus to requirements. The unit powers on and is in working order. The focus knob is quite stiff but the fine adjustment works as intended. It is in good cosmetic condition with minor marks. Includes: -Leica ∞/-/ C PLAN L 10x/0.22 PH 1 (506078)-Leica ∞/0-2 C PLAN L 20x/0.30 PH 1 (506152) 2 x Eyepieces:-Leica 10X/18 (527000)-Leica 10X/18 M (527001)

This listing is for a VWR VisiScope IT404 MicroscopeVisiScope IT 404 inverted microscope offers a co (more)mplete solution for your brightfield observations. The IT 404 inverted microscope is equipped with a full set of objectives that covers most standard applications. A mechanical stage is included along with 4 objectives (4x and 40x for brightfield; 10x and 20x for phase contrast).The light ring of the adjustable phase contrast slider is pre-centered when the microscope leaves the factory. It should therefore need no further adjustment. If a re-centering is needed, it can be performed via the two side bolts. The 4X/10X light ring must be used with 4X and 10X phasecontrast objectives, the 20x/40x light ring with the 20x and40x and the opening is used for bright field.The Moticam 5 is an attachable digital C-mount camera with CMOS-Sensor and it features a 5MP live resolution capability along with:- Live resolution: 5.0MP (2592x1944)- Optical calculation: 1/2,5"- Output: MiniUSB- Focusable lens: 12mm- 2 variable diameter eyepiece adapters- Macrotube for specimens observation- Motic Images Plus 2.0 for PC and MAC- Motic 4-dot calibration slideFeatures:- Ergonomic:Every control is easy to reach and every component has been designed with ease of use in mind. Focusing and specimen movement controls allow the wrists to rest on the bench. Light intensity adjustment is placed very close to the focusing knobs. The specimen stage is fitted with a special glass insert that allows you to see the objectives for immediate identification of the magnification set-up. An ergo head allows compensation for operator height.- Efficiency:Plan achromatic, infinity corrected optics, bright 8 W LED illuminator, phase contrastset, holders for specimen slides, flasks, Petri dishes, trinocular head for photo/ video applications. These are the features of IT 404, a powerful, complete and innovative instrument, designed to set a reference standard for routine and advanced tissue culture.- User comfort:The 22 mm extra widefield optics are pleasant to use minimising operator stress. The special eyepieces are designed for eyeglass wearers.- Objectives:Long working distance (LWD) infinity corrected (IOS) plan achromatic: 4x/0,10 (working distance 18 mm), phase contrast 10x/0,25 (working distance 10 mm), phase contrast 20x/0,40 (working distance 5,1 mm), 40x/0,60 (working distance 2,6 mm), corrected for 1,2 mm cover glass.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Motic BA310E LED Trinocular Compound Microscope - Phase Package The Motic BA310E Elite phase contras (more)t microscope for clinical, University or Institutional uses. The BA310 elite phase contrast microscope has full phase 10x, 40x, 100x objective lenses and a full phase condenser. - Objective Lenses: Inward facing quintuple objective turret revolving nosepiece holds CCIS EC Plan Achromat 4x objective, EC Plan Phase Contrast PH10x, PH40xs, PH100xs oil immersion. - Eyepieces: Siedentopf high eyepoint widefield 10x eyepieces, 20mm FOV. Accepts 25mm diameter reticle. 30° inclined binocular tubes with interpupillary distance adjustments from 55 mm to 75 mm. (WF12.5x and WF15x eyepieces are also available). Independent diopter adjustments are on each eyepiece, rather than on the eyepiece tube. Trinocular port features a professional light distribution slider of 100:0 / 20:80. - Total Magnification: 40x, 100x, 400x, 1000x. - Specimen Stage: Rackless stage. Rectangular mechanical stage, 175mm x 140mm with a travel range of 76mm x 50mm. Low positioned coaxial control knobs make it easy to control stage movement. The stage is protected with a special hard coating to protect against abrasion and fungus growth. - Stand: T-shaped base and pyramid-designed frame provide superb stability and mechanical design to achieve ergonomic and fatigue-free operation as well as saving vital desk space in modern laboratories. - Focusing: Fine and coarse coaxial focusing. The Combination of a triangular steel rail with an adjustable torque control knob provides for easy control of the coarse focusing tension and total vertical movement of 25mm at 2 µm. - Condenser: 5-position phase contrast turret condenser with BF, DF, PH1, PH2, PH3. - Illumination: Your choice of either LED illumination or 6V / 30W quartz halogen illumination together with the field iris diaphragm provides an exact Koehler illumination. Includes built-in intensity control.100~240V. - Anti-Fungus Treatment: All critical parts of the microscope such as the eyepieces, objectives and observation tube are anti-fungus treated to ensure image clarity and optical performance. - Size: 15.5" high. - Warranty: Five year warranty excluding electrical parts. Click Here to View Product Video INCLUDED: The Motic BA310E LED Trinocular Compound Microscope - Phase Package includes: - EC Plan Achromat objectives 4x, 10x, 40x S, 100x S-oil - Observation tube - Turret Condenser - Phase Objectives - Phase Centering Telescope - Eyepiece - Nosepiece - Objectives - Rackless stage - Condenser - Illumination - 5 Year Manufacturer's Warranty

Zoom ratio 8.5:1 Focussing range 50 mm Headpiece 45° inclined, interpupillary distance 50 – 76 mm Di (more)stortion free objective, 1X: N.A. 0.084, W.D. 81 mm Widefield eyepiece, high eyepoint, F.N. 24, diopter lock mechanism, build in double cross line Transparent stage plate Illumination mode: high contrast, low contrast and oblique illumination Illumination area Ø 40 mm

Safety and resistance for your laboratory OHS advance is designed to guarantee the highest safety st (more)andards. - The durable watertight housing and IP 54 protection rating ensure durability even in the most aggressive environments. - Built-in safety alarms for overload, over temperature and over current will maintain performance over time by stopping agitation - The safe operation of the start and stop knob and the lock key prevent unintentional starts and changes in working conditions. - The built-in vibration sensor with different sensitivity levels will stop the operation and inform you to make sure your OHS is stable and properly fixed. Continuous operation guaranteed and supported by a 3 year extended warranty. First-class performance OHS 200 Advance is the ideal solution for demanding applications operating with viscosities up to 100,000 mPa. The electronically controlled brushless motor of the OHS 200 Advance agitates up to 100 l (H2O) with a maximum torque of 200 Ncm and guarantees maximum durability. SpeedServoTM torque compensation technology maintains constant speed by automatically adapting to changes in viscosity. Set the OHS 100 Advance electronic speed control from 30 to 1300 rpm. Constant Torque at Any Speed The powerful brushless motor and microprocessor control ensure unprecedented performance, highlighting the difference between a conventional rod stirrer and VELP OHS Series rod stirrers. The torque remains constant at any speed, even at maximum. Having a constant torque is a very important parameter for the reproducibility of the analyzes. SmartChuck Technology: Inserting or Removing an Auction Has Never Been So Simple! How often do you have to remove or replace the stirring rod using two hands and see the rod fall into the liquid? SmartChuck ™ technology makes this activity quick and easy with the use of one hand and without special accessories. Two simple movements allow you to unlock the protection ring and remove or replace the stirring rod. In the event that the protection ring is opened during the analysis, the instrument stops shaking, showing a safety message on the display. Intuitive and precise control panel The intuitive 3.5” OHS Advance TFT display will guide you to precisely set your working conditions and achieve reproducible results. Show key information at a glance. Real-time information on viscosity variation with a resolution of 1 Ncm. Interact with OHS Advance from the real-time graph showing speed, torque and temperature of your test. The OHS Advance works without surveillance thanks to the timer that can be set from 1min to 99.59h. Ideal operating methods can be defined and programmed for demanding tasks where ramps and interval operations are required. Temperature under control OHS Advance is supplied with a Pt100 temperature probe included in the package. Constantly monitor the temperature of your reaction and set the meter to slow down or stop activity if the temperature reaches a defined value. This is important when you want to prevent exothermic reactions from interfering with your analysis! THE BENEFITS OF OHS ADVANCE CONNECTIVITY The OHS Advance is the only rod stirrer to offer the ability to control and monitor processes via Wi-Fi connection to VELP Ermes and via USB. The VELP Ermes cloud platform allows you to control the OHS Advance from PC, smartphone and tablet through a simple and intuitive web interface. With this platform designed by VELP it is possible to activate the shaking, set a timer, set a method (among those saved on the device), download and share reports with a click. For applications in the pharmaceutical, biotechnology and life science sectors, VELP Ermes can manage OHS Advance localized in clean rooms or other controlled environments, without the need for lengthy safety procedures. With the OHS / CotrollerSoftTM software, VELP offers the possibility to all laboratories that cannot benefit from cloud services, a valid alternative with USB connectivity. The OHS allow you to choose between two different control panels, Digital or Advanced, to better suit the needs of your laboratory. - Digital: precise speed settings; torque indicator; integrated timer. - Advanced: all information at a glance; intuitive; real-time graphs. Very easy to use and comfortable tools. Intuitive control panel equipped with Smartchuck: operations and rod change with one hand, effortlessly. - Mandrel opening: Ø from 1 to 13 mm - Stirring rod diameter for Pass-Through: up to 8.5mm Velp products guarantee you peace and security within your laboratory. - Safety button clearly visible from the front - IP54 protection - Integrated safety sensors CONTROL PANEL OF OHS ADVANCE MODELS A - LCD display B - Display keys C - Stirring speed kond D - Lock key E - Main switch F - Smart Chuck

The certified intrinsically safe PM02.EX power supply, manufactured by RADWAG, has been designed to  (more)power the HRP.EX. PM02.EX power supply comes in two designs: PM02.EX-1-2: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM02.EX-2-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. The certified intrinsically safe PM01.EX power supply, manufactured by RADWAG, has been designed to power the HX5.EX indicator. PM01.EX power supply comes in two designs: PM01.EX-1: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA.

M1 Mass Standard - knob weights. Nominal value - 2 kg.

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Julabo DYNEO DD-300F Refrigerated Circulator with Digital Output, 115V/60Hz (NRTL Certified) Refrige (more)rant R134a Working Temperature Range -25°C - 200°C Cooling Capacity 300W at 20°C Features - Powerful cooling machines - Suitable for internal and external applications - Optimized cooling coil design saves space in the bath tank - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces (optional) - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe DYNEO™ refrigerated/heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. Refrigeration combinations afford low temperature capabilities from -20 °C to -50 °C with an upper temperature limit of 200 °C. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. A color TFT display with central rotary knob controller includes a multi-lingual interface, integrated programmer, Pt100 port for external temperature control, USB connection for external PC control and data-logging with digital options including RS232 port or an analog module interface for voltage or current control. PID temperature control provides ±0.01 °C stability. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Stainless steel bath tanks with integrated drain port.Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo DYNEO DD-300F Refrigerated Circulator with Digital Output, 115V/60Hz (NRTL Certified) includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark R2020-0507 Tube holder, 5 x 5-7ml, 2/pk (1 pack included) The Benchmark R2020-0507 Tube ho (more)lder, 5 x 5-7ml, 2/pk (1 Pack Included) is for use with the Benchmark Rotomini and Rotomini Plus Series Tube Rotators. INCLUDED: The Benchmark R2020-0507 Tube holder, 5 x 5-7ml, 2/pk includes: - 1 Set of Benchmark R2020-0507 Tube holders - Manufacturer's Documentation - 1 Year Manufacturer's Warranty