Hitachi S3000H SEM Scanning Electron Microscope Lab

PSL Rheotek TCB 8 Temperature Controlled Viscometer Bath This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up and the heating is in good working order. Inside tank dimensions - L59 W31 H37cm It is in good cosmetic condition with some marks from use.

Corepoint Scientific NSWDUF251JWJ-1 -50C to -86C Upright Ultra Low Temperature Laboratory Freezer, 2 (more)30V Temperature Setpoint Range -50°C to -86°C Capacity 25 cu. ft. Defrost Method Manual Features - Five insulated inner doors - Microprocessor controller specifications - Touch pad keys and four line display for easy programming - Large LED temperature readout - Audible and visual alarms with silence key for audible alarms - Programmable high and low temperature alarm set points - Programmable access code to limit access to set points and controller configuration - Automatic voltage boost to compensate for low line voltages - Normally open, normally closed alarm contacts and 4-20mA signal available to connect to central alarm system - RS-232 serial output - Battery backup on electronics during power outages The Corepoint Scientific NSWDUF251JWJ-1 -50°C to -86°C Upright Ultra Low Temperature Laboratory Freezer, 230V, is designed for demanding cold storage applications, ensuring safe sample and reagent storage. This 25 cu. ft. capacity freezer features high efficiency and low noise operation with two compressors maintaining a 300 BTUh reserve capacity. The interior boasts a triple gasket seal, vacuum relief port, five double-walled insulated inner doors, and four heavy-duty stainless steel adjustable shelves. The unit is equipped with a microprocessor controller with touch pad keys, a large LED temperature readout, and audible and visual alarms with a silence key. Programmable high and low temperature alarm set points and an access code limit access to set points and controller configuration. Additional features include automatic voltage boost for low line voltages, alarm contacts, a 4-20mA signal for central alarm system connection, RS-232 serial output, and battery backup during power outages. The temperature range is -50°C to -86°C. The freezer has a cam action handle with key lock, door switch for alarms, four heavy-duty swivel casters with locks, and a CFC-free refrigerant. Made in the USA, this unit is ideal for laboratories requiring ultra-low temperature storage. INCLUDED: The Corepoint Scientific NSWDUF251JWJ-1 -50C to -86C Upright Ultra Low Temperature Laboratory Freezer, 230V includes: - Key for Door Lock - 4 x Adjustable Shelves - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus EX225/AD Explorer Semi-Micro Balance, 220 g, 0.00001 gExplorer's weighing cells are precision- (more)machined from a solid metal block and, together with AutoCalTM, provide exceptional accuracy and durability suitable for laboratory and industrial environments. Equipped with a color touchscreen display that enhances the user-experience. In addition, touchless sensors, automatic draftshield doors (on select models) and ionizer ensure the integrity of results. A detachable terminal with a large color touchscreen, programmable IR sensors, optional built-in Ionizer and automatic doors, and a frameless draftshield make Explorer balances easy & convenient to use. Among the features that enhance the operator experience are:• Color touchscreen display• Four programmable touchless sensors allow the operator toperformcommon functions and commands with a swipe of the hand• Modular design in which the base and display can beseparated to allowthe balance to fit ideally on the lab bench. Click Here to View Product Video INCLUDED: The Ohaus EX225/AD Explorer Semi-Micro Balance, 220 g, 0.00001 g includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hoefer TE70XP Semi-Dry Transfer Units w/ Built-In Power Supply Transfer Area Up to 14 x 16 cm Maximu (more)m Power Settings 30 V, 500 mA, 15 W Maximum Gel Capacity 4 Mini Gels Features - Intelligent built-in power supply—prevents the stack from overheating by monitoring the transfer status - Requires minimal current—does not generate excessive heat that can dry out the transfer stack and halt transfer or damage transfer units - Durable iridium oxide and stainless steel electrodes—allow for contamination free, consistent transfer - Vented electrodes—prevent build up of bubbles which may impair transfer - Minimal buffer requirements—reagent cost and preparation time are reduced The Hoefer TE70XP Semi-Dry Transfer Unit with Built-In Power Supply is an innovative system designed for the rapid and efficient transfer of proteins from polyacrylamide gels onto nitrocellulose or PVDF membranes. Featuring an intelligent built-in power supply, the TE70XP monitors transfer status in real-time, automatically halting the process to prevent overheating of the stack. With a 14 x 16 cm transfer area, the TE70XP accommodates up to four mini gels in a stacked format, allowing for high-throughput transfers without compromising quality. This semi-dry transfer unit is equipped with durable iridium oxide and stainless steel electrodes, ensuring contamination-free, consistent results. Vented electrodes prevent bubble buildup, enhancing the reliability of each transfer. Designed to minimize buffer requirements, the TE70XP reduces reagent costs and preparation time, making it a cost-effective solution for busy labs. Its robust construction includes a molded base with a platinum-coated titanium anode and a hinged lid with a stainless steel cathode, ensuring long-lasting performance. INCLUDED: The Hoefer TE70XP Semi-Dry Transfer Units w/ Built-In Power Supply includes: - Molded Base with Platinum-Coated Titanium Anode and Internal Power Supply - Hinged Lid with Stainless Steel Cathode - Blotting Paper (14 x 16 cm), 25 sheets - Porous Cellophane (20 x 35.5 cm), 50 sheets - Mylar® Masks (16.5 x 18.5 cm), 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Box of 200 Semperguard Xtra Lite nitrile gloves size S 6-7 Size S6-7 Quantity: 200 gloves Powder fre (more)e Category III CE class I - EN 420 - EN 374 - EN 455 For laboratory Length 240mm Thickness 0.14mm Smooth interior Lavender blue color Ambidextrous Type B Food contact approved, protection against pathogens Quantity available: 38 boxes of 200 gloves

Yamato WH-501C Auto Pure High Capacity Di Type 2 & Type 3 Water Purification System, 120V Maximu (more)m Flow Rate 1.25 gpm / 4.7L/min Pressure Range 10 to 100 psi Temperature Range 40F to 100F Features - Turn-key system for low cost – on demand service - Resistivity light included for visual indication of cartridge replacement - Available in high purity and high capacity configurations - Available in 2-1/2″ and 4/1/2″ diameter configurations - Outlet isolation valve, spanner wrench and associated tubing provided - Economically produces DI water A pre-assembled cartridge system that provides deionized water using a staged filtration process. Water purification is provided using a three-stage process. High Capacity DI System- 4-1/2" Diameter (10" Carbon, (2) 20" High Capacity DI, & 20 K DI Light). Type 2 and 3 water quality. INCLUDED: The Yamato WH-501C Auto Pure High Capacity Di Type 2 & Type 3 Water Purification System, 120V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

MULTI-HS 6 DIGITAL VELP MAGNETIC STIRRER SAFETY AND RESISTANCE - Warning message on the display when (more) the plate reaches 50°C - The Safety Lock function prevents unintentional changes of settings in order to meet all laboratory safety standards. - The VELP CerAlTop ™ top plate is made of aluminum alloy which guarantees temperature homogeneity with excellent heat distribution and high specific power thanks to the circular configuration. A thin layer of ceramic protects the plate from scratches and chemicals and guarantees high resistance to thermal stress and thermal shock. SMART AND SIMPLE USER INTERFACE The LED display is easy to read and thanks to the intuitive icons the operator will always have an eye on the working conditions: - Active heat - Temperature set point - Activating the timer - Automatic reverse option - Lock button Two extremely precise rotary knobs control the temperature and speed setting and to start the heating you need to press the knob; a small detail that exemplifies Velp's utmost attention to operator safety. By touching both knobs simultaneously, it is possible to access the advanced menu for the most suitable configuration of all operating modes. POWER AND PRECISION - The extremely powerful Brushless motors are able to stir from 100 up to 1000 rpm, offering practically unlimited duration over time. The stirring speed is always constant, even when the viscosity changes, thanks to the SpeedServo ™ torque compensation. - The middle button allows you to set the timer for unsupervised work. The Timer can be set from 1 min up to 99 hours and more advanced configurations can be set in the advanced menu. - The Auto-reverse option improves the kinetics by changing the direction of the stirring direction. You can also set the direction change to your preferred time interval. TECHNICAL FEATURES: Stirring position distance: 100 mm. Stirring speed: 100 - 1000 rpm. Speed setting accuracy: 5 rpm. Temperature setting resolution: 1°C. Hot top warning: on display (>50°C). Timer: from 1 min to 99 h: 59 min. Timer setting steps: 1 min. Autoreverse: from 5 s to 99 min-59 s. Autoreverse setting steps: 1 s.

M1 Mass Standard - rectangular. Nominal value - 1000 kg.