Nikon Eclipse TS100 Microscope w/ 3 x Objectives 4X/0.10, 10X/0.25, 20X/0.40 Lab

Zeiss AXIO Observer Z1 w/ CO2/02/Temp Module S1, Axiocam, MCU 28 Lab This microscope system was remo (more)ved from a university where it was surplus to requirement. All units included are in good cosmetic condition, the previous user has stated that this system was in working order prior to removal. We were able to test the following, which are in working order: - Zeiss Pecon CO2 Module S1 - Zeiss Pecon O2 Module S1 - Zeiss Pecon TempModule S1 - Zeiss Pecon Heating Unit XL S - Zeiss MCU 28 w/ Controller - Zeiss AIM-System - Zeiss Axio Observer LCD TFT touchscreen Control Panel Unable to test the following, due to the reasons stated alongside: - Zeiss HBO 100 Fluorescence Microscope Lamp 423010 - Unable to power on due to Class 4 Laser warning label. - Zeiss Axiocam HRm - Power supply cable not included. The microscope is fitted with: - 2 x Zeiss 1016-758 W-Pl 10x/23 Microscope Eyepiece There are no objectives included. This microscope system features all the parts listed above, we are unable to test this system further at our facility due to restrictions on operating lasers on our site.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all.

Olympus IX70 Inverted Fluorescence Microscope This item was removed from a university lab where it w (more)as surplus to requirements. The microscope is in reasonably good cosmetic condition but some issues were found during servicing. • Fluorescence attachment & mercury lamphouse present but no mercury power supply starter.• 2 filter cubes present – U-MWG2 & U-MWB• Some evidence of corrosion due to salt or other liquid.• Coarse focus very stiff – clutch lever stuck fast.• Transmitted light power supply is good.• Eyepiece adjusters are stuck. Therefore, it is listed as Spares/Repair. Includes:- Olympus BX 100W HBO Mercury Microscope Lamp U-ULS100HG (no power supply included) - 2 x WH10X-H/22 eyepieces - Fluorescence attachment and mercury lamphouse (no mercury power supply starter) - 2 filter cubes: U-MWG2 and U-MWB Condition Notes:- Missing stage, objectives, and condenser - Some corrosion present, likely due to salt or liquid exposure - Coarse focus is very stiff, with a stuck clutch lever - Transmitted light power supply is functional - Eyepiece adjusters are stuck

This item has just arrived in our stock. Please enquire for further details.

Motic BA410E Trinocular Sextuple Compound Microscope - Premium Phase Lab Package Magnification Range (more) 4x to 100x Optical System Colour Corrected Infinity (CCIS) Illumination 12V/50W Halogen or 12V/3W LED Features - Flagship model with highest level of optical performance - Phase equipment included allowing users to view samples using phase contrast - Maximum clarity in colour and resolution - Expanded resolution power for more detailed specimen evaluation - Light intensity adjustment with memory for each objective position - Rackless stage allows safe and fast throughput of slides - Coaxial coarse and fine focusing system with tension adjustment - Fine focus precision of 1 μm - Auto ON-OFF illumination function via built-in IR-sensor - Focusable and centerable swing-out Abbe condenser - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) The BA410 Elite is Motic’s brand new approach for a professional research microscope with best image quality options. This version of the Motic BA410E is a trinocular sextuple microscope with a trinocular head, a CCIS Plan Achromat EC-H PL4X objective, and CCIS Plan Phase objectives EC-H Ph10X, EC-H Ph40X S, EC-H Ph100X S-oil objectives for professional research utilizing the phase contrast microscopy technique. Universities and laboratories with applications in hematology, cytology, and histology will benefit from this flexible microscope platform with a superb performance in optics and mechanics. Following Motic’s CCIS Infinity concept, the new Plan Apochromatic objectives may be chosen to get maximum image fidelity. Expanded resolution power in terms of numerical aperture and stunning color reproduction allows a reliable sample evaluation in all biomedical environments. The established EC-H Plan Achromatic bright field objectives are an integral part of the standard configurations, while Phase contrast is feasible with positive and negative Phase lenses included with this package.The BA410E stand carries an encoded 6-fold nosepiece that memorizes the light intensity setting for each objective position. This light memory function replicates the last setting once the respective objective position is swung in again. The rackless stage without a prominent gear rack allows a safe and fast throughput of slides. A ceramic stage insertion withstands abrasion for a long lifetime. INCLUDED: The Motic BA410E Trinocular Sextuple Compound Microscope - Premium Phase Lab Package includes: - Widefield High Eyepoint Eyepiece WFPL 10X / 22mm - Rubber Eyecup (Paired) - Reversed Sextuple Nosepiece - Phase Contrast 5 Position (BF, DF, PH1, PH2, PH3) Turret Condenser - Phase Centering Telescope - CCIS Plan Achromat Objective EC-H PL4X - CCIS Plan Phase Objectives EC-H PH10X, EC-H PH40X S, EC-H PH100X S-oil - Low Position Rackless Stage - Achromat Swing-Out Condenser N.A. 0.90 with Iris Diaphragm - Immersion Oil (5 ml), Allen Hexagonal Key, Vinyl Dust Cover, Blue Filter, Spare Fuse, and Arm Rest - Koehler Illumination Quartz 50W Halogen and 3W LED with External Lamp House and Intensity Control - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The halogen cold light source of Volpi type Intralux 4000 has been developed for imaging in industri (more)al environments. Connection diameter in the device: Ø 15mm Dimensions (WxDxH): 168 x 230 x 105 mm

Hoefer PS300B Electrophoresis Power Supply Voltage 10 to 300 V in 1 V step Current 4 to 500 mA in 1  (more)mA steps Maximum Wattage 90 W Features - Constant voltage or constant current mode with automatic crossover - 10 to 300 V, 4 to 500 mA, 90 W - Four sets of 4 mm output jacks - Ideal choice for most electrophoresis techniques - Continuous runs or 999 minute timer - Automatic recovery after power failure - Open circuit detection - Short circuit protection The Hoefer PS300B Electrophoresis Power Supply is a versatile and reliable solution for most electrophoresis techniques. Its compact design, large handle, and intuitive operation make it easy to integrate into any lab environment. Equipped with a large, easy-to-read LED display, the PS300B allows users to set constant voltage or current parameters, adjust the timer up to 999 minutes, and start runs effortlessly. With a range of 10 to 300 V and 4 to 500 mA, this power supply delivers up to 90 W of power, ensuring precision and adaptability for various applications. The PS300B features three distinct modes of operation: Constant Voltage Mode, where the power supply will attempt to maintain the user-selected voltage by automatically adjusting the current flow; Constant Current Mode, where the power supply will attempt to maintain the user-selected current flow by automatically adjusting the voltage supplied; and Automatic Crossover, which ensures that when the constant parameter (voltage or current) cannot be maintained due to power supply operating limits, the power supply automatically switches to maintaining the other parameter. Key features include short circuit and open circuit protection, automatic recovery after power failure, and four 4 mm output jacks for flexible connections. Designed for both continuous operation and timed runs, the PS300B ensures reliable performance, making it an ideal choice for consistent, efficient electrophoresis procedures. INCLUDED: The Hoefer PS300B Electrophoresis Power Supply includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Shaker microplate MX100-4A. Ideal for agitation of plates in ELISA. Agitation for 4 microplates. Va (more)riable speed from 200 to 1500 rpm. Timer from 1 min to 99h59min. Resolution: increments of 10 rpm. Brushless Motor. Orbit 3 mm optional Rack for 20 tubes of 1.5 or 0.5 mL.

Hoefer EPS 2A200 Electrophoresis Power Supply. Two plugs. Maximum voltage 200V. Maximum current 2000 (more) mA. Maximum wattage 200 W. Timer.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.