Motic BA410E Trinocular Sextuple Compound Microscope - Premium Phase Lab Package

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Digital Instruments Nanoscope IV Scanning Probe Microscope Controller Model NS41 was removed fr (more)om a university lab where it was surplus to requirements. The unit powers up but has not been tested further at our facility. The lab confirmed it was working when last used. It is in reasonably good cosmetic condition but has some marks from use.

Leica Microsystems Type - TCS SP2 Confocal Microscope System This was removed from a university lab  (more)where it was surplus to requirements. What is included is in good working order, but the system is not complete. It is missing the following; Table topCooling unitMicroscope isolation tableCameraFlexi tube for prior unit.Bulb for prior unit.There may be more missing parts, but we are unable to confirm. It is in good cosmetic condition with minor marks. Included are; Leica TCS SP2 MicroscopeModel: RCS SP2Serial#: 142400026 Attached to microscope:Leica ∞/0.17/E HCX PL APO 40x/1.25-0.75 OIL CS Leica ∞/-/C HC PL APO 20x/0.75 Leica ∞/0.17/E HC PL APO 10x/0.40 CS 2 x Eyepieces HC PLAN S 10x/22 Leica Condenser 0.53 S 23 (521500)Leica C Mount Adaptor 0.5x : 1/2" = 16 (541511) All other items included: Prior Lumen200Model: L200/CSerial#: 70808 Ernst Leitz Wetzlar GmbhType: 307-072.45Hg 100 W Bulb Leica Power Supply for DiodeLaser COH 405nm, 25mWPart#: 1530910001 03 Leica DM R ManualLeica Confocal SoftwareLeica TCS User Manual Leica PC with Software installed. Leica Dust cover for Microscope and PC.

Motic Moticam A8 Microscope Camera Highest Live Display Mode 3840x2160 Pixels (4K) Capture Resolutio (more)n 8MP Maximum Frames per Second (FPS) 30 FPS (15FPS @ 3840x2160) Features - Perfect solution for tiny structures and insights on other stunning preparations - Ideal for documentation and flexible image capturing - Provides higher resolution demanded by advanced technical training areas or education fields - Features state-of-the-art sCMOS imaging unit packed in a high quality metal housing - Fits microscopes with available C-Mount for 1 / 3" sensor size - Still image and video capture - Still image measurement - Image adjustments - White balance - Automatic and manual exposure - Individual objective calibration system The Motic Moticam A Series of microscope cameras are digital cameras ultimately developed and designed for newcomers in digital imaging and young explorers with ambitious goals. For this reason, the newest technologies are hidden in a robust metal housing. It’s simple to use without time consuming training, thanks to the MotiConnect application software. This A8 model of the Moticam A Series is a microscope camera capable of delivering up to 15 frames per second at 3840x2160 pixels per frame, or up to 30 frames per second at 1920x1080 pixels per frame. With its higher resolution capability, the A8 is also ideal for documentation and flexible image capturing. Time is precious and limited. For this reason alone, the Moticam A Series is easy to install and ready for immediate use. When Motic promises all-in-one, they mean that all accessories are included. A calibration slide, eyepiece adapters for any eyepiece tube, a focusable lens and even a macro tube is part of the package. The all-in-one solution for a headstart is the Moticam A Series. The MotiConnect is a free multi-platform toolbox to make the most out of your new Moticam A Series product. Capture, annotate, measure and evaluate using simple to understand and easy to use tools. This free software can also be enhanced by purchasing the more advanced Motic Images Plus 3.1. Click Here to View Product Video INCLUDED: The Motic Moticam A8 Microscope Camera includes: - 30mm and 38mm Eyepiece Adapters - Calibration Slide and Card - C-Ring - Focusable Lens - Macro Viewing Tube - Dust Cap - Power Cord - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Motic AE2000MET Trinocular Inverted Industrial Microscope, 50W Illumination Objectives Optional Opt (more)ical System Colour Corrected Infinity Optical System (CCIS) Illumination Kohler Quartz Halogen 12V/50W Features - Robust manufacturing quality for a long lifetime - New BF/DF objectives for metallurgy (sold separately) - Sufficient power resources - A flexible upgrade for digital results The Motic AE2000MET Trinocular Inverted Industrial Microscope, 50W Illumination is an Inverted Metallurgical microscope designed to inspect polished cross-sections as well as larger, bulky samples within industries such as automotive, machinery, and metal fabrication. Large metal or die cast parts, too large to view under a conventional upright microscope, can easily be examined for failure analysis, material research or quality control. INCLUDED: The Motic AE2000MET Trinocular Inverted Industrial Microscope, 50W Illumination includes: - Widefield N-WF10X/20mm Eyepieces - Dust Cover - Allen Key - Blue Filter - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Ohaus oscillating and undulating agitators OHAUS rocking and undulating shakers are designed for use (more) in a wide variety of laboratory applications. The rocking shakers feature a controlled rocking motion, while the wave shakers provide a mild three-dimensional wave motion with low foaming effect. Available in digital version and in the economical analog version. All models include a non-slip mat. As an accessory, a stacking tray is available to easily double the flow rate. - Easy adjustment of the angle of inclination and speed, for optimal mixing - Results reproducible with digital models. Precise adjustment of the angle of inclination in 1 degree increments with a decrease in speed up to 1 rev / min. and intuitive touch controls - The speed boost function allows you to gradually increase the speed to the desired setpoint to avoid splashing. A state-of-the-art motor and electronics allow you to maintain a regular oscillatory or undulatory movement. Applications Chemical extractions, mixing of blood samples, coloring gels, cell cultures, solubility studies Operation Detachable three-wire cable and plug (included) Structure Cold Rolled Steel (CRS) Construction features Integrated tray with non-slip rubber mat (included) Not sure which agitator to choose? Download the Open Air Agitator Selection Guide to get a quick overview of all available models.

Limpsfield LPN1/440  Natural Gas Burner 440 KW/hr - 1.5MBtu/hr Dungs Gas Valve This item was re (more)moved from a university where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LPN1/440Serial No. 01191Manufactured 8.08.14Output 440 KW/hr Dungs gas valve DMV-DLE 520/11 Autoflame Mini Mk.8 MM Combustion Management System 2 x part No. 10005 serial Nos. 12473, 12467 Hanning Elektro-Werke fan motor type OE7D2B-108  240v, 0.55KW 1.5" gas inlet pipe

The HRP 5Y.KO series of mass comparators enables calibrating mass standards and weights in accordanc (more)e with OIML Recommendation (R-111) for class F2 and lower classes. Comparators are used to ensure consistency in mass measurements as well as to verify weights according to legal metrology requirements. RADWAG mass comparators have been recognized by calibration laboratories in many countries. The HRP 5Y.KO mass comparators consist of two elements: a professional weighing platform (modern design of an electromagnetic mechanism in a hermetic steel casing) and 5Y terminal. The weighing platform is made of steel and features marks facilitating centric loading of mass standards. The comparator has a user-friendly menu. Data security and work results archiving are ensured by RADWAG terminal software.

Stainless Steel HRP.H Platform Wherever high readability and precision are important. Wherever good  (more)repeatability in harsh industrial conditions matters. Stainless Steel HRP.H Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others Stainless Steel HRP.H Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Unbreakable Stainless Steel HRP.H Platforms feature a modern electromagnetic mechanism design in a sealed steel housing and overload protection. The use of stainless steel for the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing. Stainless Steel HRP.H Platforms are distinguished by a high degree of protection IP 67. For an additional charge we will make HRP platforms in Ex version, but in order for the device to work in explosive areas, you need to supply the PUE HX5.EX terminal. Use the potential Stainless Steel HRP.H Platforms work with one of two weighing terminals: PUE HY10 or PUE 7.1. The terminals’ software enables you to archive your work results, ensures data safety, and allows the platforms to work with powerbanks from our offer. In turn, you will select appropriate antivibration tables for the platforms, and thus increase the readability of your measurements.

IKA Eurostar 60 Control Overhead Stirrer Speed Range 0/30 to 2000 RPM Viscosity Max. 50,000 mPas S (more)tirring Quantity Max. 40 l Features - Multilingual TFT display - Programmable functions - Integrated temperature measurement - Interval operation - Timer function - Adjustable safety circuit - Locked function - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display - H 67.60 temperature sensor and WH 11 WiCo holder included indelivery Universal laboratory stirrer designed with a removable wirelesscontroller and a digital TFT display. It automatically adjusts the speedthrough microprocessor controlled technology within the speed range of 0/30 -2000 rpm. The stirrer comes equipped with a RS 232 and a USB interface tocontrol and document all parameters. An integrated torque trend display isprovided for the measurement of viscosity changes. Safety circuits installedensures automatic cut-off in an anti-stall or overload conditions. Continuouscomparison of shaft speed to desired speed is maintained and variations areadjusted automatically. This guarantees a constant speed even with changes inviscosities of the sample.