Hoefer PS300B Electrophoresis Power Supply

The redesigned Sub-Cell GT Electrophoresis Cell offers updated features that make electrophoresis ev (more)en easier. The Sub-Cell GT Ccell is the most versatile submerged horizontal electrophoresis cell in the Sub-Cell family. Because the Sub-Cell GT cell offers the greatest choice of gel lengths, sample combs, and separation modes, it is ideal for Southern and northern blotting protocols. Up to 30 samples can be resolved over a distance of 25 cm. Using four rows of combs, the cell will run up to 120 analytical samples. Cell size (WxLxH): 180 x 405 x 94 mm Gel tray sizes (OD) (WxL): 100 x 150 mm, 150 x 150 mm ReadyAgarose gels accommodated: No Sample throughput: 1 – 120 Base buffer volume: ~1 L Buffer recirculation: No Bromophenol blue migration: ~30 mm/hr (at 75 V) This electrophoresis power supply is recommended for basic applications such as submerged horizontal and mini vertical gel electrophoresis. It offers timer control and constant-voltage or constant-current output. Output range (programmable): 10 – 300 V, fully adjustable in 1 V steps 4 – 400 mA, fully adjustable in 1 mA steps 75 W (maximum) Type of output: Constant voltage or constant current with automatic crossover Output terminals: 4 pair recessed banana jacks in parallel Timer: 1 min – 99 hr 59 min, fully adjustable Pause/resume function: Yes Safety features: No-load detection, sudden load change detection, overload/short-circuit detection, overvoltage protection Input protection: Fuse on both hot and neutral Dimensions (WxLxH): 210 x 245 x 65 mm Weight: 1.1 kg

The redesigned wide Mini-Sub Cell GT Electrophoresis Cell offers updated features that make electrop (more)horesis even easier. The wide Mini-Sub Cell GT Cell is suited for multiple-sample, rapid-screening applications. This popular system has a wide platform that can separate 30 samples per comb. The wide Mini-Sub Cell GT Cell is the same width as the Sub-Cell GT Cell, so the comb holder, combs, and 15 x 10 cm gel trays are interchangeable with the larger Sub-Cell GT units. All wide Mini-Sub Cell GT Systems accommodate ReadyAgarose Precast Gels to save time and allow highly reproducible separations. The cells include a buffer tank, a safety lid with cables, and a leveling bubble. Cell size (WxLxH): 178 x 255 x 68 mm Gel tray sizes (WxL): 150 x 70 mm ReadyAgarose gels accommodated: Yes, wide mini and 96 Plus formats Sample throughput: 10 – 60 Base buffer volume: ~650 ml Buffer recirculation: No Bromophenol blue migration: ~4.5 cm/hr (at 75 V)

High voltage power supply with constant voltage, constant current or constant power regulation mode.

This BIO RAD Bio-Plex System, Luminex XYP & Luminex 100 Multiplex was removed from a university  (more)lab where it was surplus to requirements. The system powers on and is in a reasonably good cosmetic condition, we're unable to test it further at our facility. System includes: BIO RAD Luminex XYPModel: Luminex XYPSerial#: LXY05066104 BIO RAD Luminex 100Model: Luminex 100Serial#: LX1000503501

Hoefer™ miniVE electrophoresis unit. Vertical unit with gel size 10.0 cm wide × 8 to 10.5 cm long. T (more)ank volume 1.7 L. with one module and 1.2 L. with two modules installed. Maximum operating temperature 75ºC. For use only with dilute aqueous solutions between pH 2 and pH 12. Not compatible with organic solvents or concentrated alcohols, acids, bases and oxidizing agents. Dimensions (WxDxH) 192 × 172 × 188 mm. 1.2kg. Includes 2 gel modules, safety cap and reservoir The Hoefer miniVE electrophoresis unit is a compact and efficient device that allows you to separate DNA, RNA and protein molecules in agarose or polyacrylamide gels. With capacity for up to 2 gels at a time, this system is ideal for laboratories with limited space that require accurate and reproducible results in their molecular biology analyses. Furthermore, its intuitive and easy-to-use design makes it an indispensable tool for researchers and technicians in the field of genetics and biotechnology.

Ohaus heavy-duty orbital shakers These models are designed to handle a wide range of applications, e (more)nsuring constant orbital shaking. Digital models offer accurate speed control for applications that require repeatable results. - Includes a tray and a rubber mat; over 70 accessories as an option - Maintenance free motor - Protect your champions. The increase function allows a gradual increase of the speed up to the set point, to avoid splashing. If so, a sensor detects the unbalance of the load and slows down the speed reaching a safer one Applications Cell cultures, solubility studies, extractions, suspensions and bacterial and yeast cultures, dyes / bleaches, immunoassays, protein studies, absorption techniques Display Easy-to-read independent LED displays with speed and time information, allowing the operator to view both settings simultaneously Operation Detachable three-wire cable and plug (included) Communication The RS232 interface provides one-to-one communication for data collection and unit control Structure Cold Rolled Steel (CRS) Construction features Integrated tray (910 x 610mm) with non-slip rubber mat included.

The G1-LN-800 is a gas generator intended for the continuous production of nitrogen with over 99.999 (more)% purity, that is often required in a variety of life science applications. This model offers a very quiet and user friendly (plug and play) operation and comes equipped with a built-in compressor unit that is completely oil-free. It is also highly economical as it offers very high production up times without the need for any additional supply options and is available with the extensive aftermarket support. This unit is capable of accommodating flows of up to 800 ml/min and can safely operate at temperatures from 5 to 45 °C. Dimensions (h x w x d): 560mm x 400mm x 700mm 230V / 50-60Hz

Temperature range: Ambient +8°C to 130°C Temperature stability (at 37°C): ± 0.1°C Temperature unifor (more)mity within block (at 37°C): ± 0.1°C Temperature uniformity within block (at 130°C): ± 1°C Display resolution: 0.1°C Dimensions (WxDxH): 235 x 280 x 115 mm Weight (without blocks): 2.3 kg Equipped with: 2x Block SHT1/16 (Tube size: 16 mm, No of holes: 12, Hole size (ØxD): 16.6 x 47 mm

The Ultrapac Smart is equipped with a lot of features to make the Ultrapac Smart the exact solution  (more)for your needs! Rely on innovative technology when it comes to high quality compressed air needs even under challenging conditions. Validated performance and a  complete new defined dryer concept designed to last. Nominal flow inlet: 5 m³/h Regeneration air averaged: 0.85 m³/h Outlet: 3.95 m³/h Operating pressure: min 4 bar – max 16 bar Media: Compressed air / Nitrogen Dimensions (WxDxH): 314 x 114 x 497 mm Weight: 10 kg

Motic Panthera TEC-BD/DF/RL Trinocular Upright Industrial Microscope, 3x2 Stage Objectives 5X, 10X,  (more)20X BD 50X S-APO BD CCIS BD Plan Achromatic & S-Apo (Pb free) DIN (for Brightfield and Darkfield) Optical System Colour Corrected Infinity Optical System (CCIS) Illumination 3W LED Epi-Illumination Features - Panthera TEC models include brilliant optics and smart functionality for extended ease of use. - Features Smart Darkfield with 5 Segment illumination mode. - New LD Plan Achromatic and S-Apochromatic BD objectives & 22mm FOV eyepieces. - Pure incident or incident/ transmitted microscope stands available. - 3W LED of selectable color temperature for incident illumination. - Motic LightTracer: Coded nosepiece & Digital light intensity knob. The Panthera TEC offers high value for the inspection of semiconductors and compound materials, especially in industrial quality control and technical education. Brightfield, Darkfield and Cross Polarization contrast are combined with a new, unique-to-Motic segmental illumination that all contribute to the versatility of this model. This concept allows an oblique incident illumination, perfect for the detection of scratches or other defects on flat and reflecting surfaces without a need to move the sample. BD models feature LD Plan BD objectives with a superb imaging performance, mounted on a 5-fold nosepiece. The light intensity for each objective position is automatically memorized and will be repeated once the objective is swung in again. The compact Epi illuminator carries a slot for polarizer and analyzer, ready for Polarization contrast and to reduce internal reflections. The illuminator also includes the controls for varying the incident light in terms of mode (BF or DF) and illumination angle.INCLUDED: The Motic Panthera TEC-BD/DF/RL Trinocular Upright Industrial Microscope, 3x2 Stage includes: - 5X/0.13 (WD 17.3mm) - 10X/0.25 (WD 16.3mm) - 20X/0.40 (WD 7.3mm) - S-Apo 50X/0.80 (WD 1mm) - Dust Cover - Allen Key - Screws for Metal Extension Support - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty