Job Lot of Mixed Benchtop Lab Equipment - Hoefer, Fisher, Grant, Fisher, Hybaid NOTE - THIS IS A SPARES/REPAIRS ITEM

Dimensions (WxDxH): 600 x 480 x 700 mm

Labconco CentriVap Proteomic SystemVacuum concentrator: Uses centrifugal force, vacuum and contr (more)olled temperature from -4C upto +100C Sensor that reads internal chamber temperature Vacuum port with quick disconnect fitting for 0.25 in. ID tubing Has quick-stop system, control panel and glass lid DNA rotor accommodates up to 60 each 1.5 ml and 72 each 0.5 ml microcentrifuge tubes Cold trap: CFC/HCFC-free refrigeration system with 1/3 hp compressor Reaches -50C (-58F) for solvent recovery and to protect the vacuum pump by trapping moisture, vapors and corrosive fumes as they evaporate from the samples Temperature graph that illuminates green when the collector coil reaches operating temperature of -40C 4-liter stainless steel collector Acrylic lid with two Quick-Disconnect fittings INCLUDED: The Labconco 7989600 CentriVap Proteomic System, 115V, 60Hz includes: - Refrigerated Benchtop Vacuum Concentrator w/ Glass Lid - Cold Trap -50°C - DNA Rotor - Vacuum Tubing - Clamps x 6 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap 12-13 mm Acid-Resistant Rotor Hexagonal rotor holds up to 132 1.5mL to 2.0mL  (more)microcentrifuge tubes 12-17mm rotor holds up to 52 2mL to 10mL tubes or up to 24 11mL to 19mL tubes 12-13mm rotor holds up to 40 1.5mL to 2mL microcentrifuge tubes or up to 108 3mL to 10mL tubes 28mm rotor holds up to 32 1.5 to 2mL microcentrifuge tubes or up to 12 40-50mL tubes Microtiter plate holds four each standard two deep-well plates DNA rotor holds up to 72 0.5mL microcentrifuge tubes or 60 1.5 to 2mL microcentrifuge tubes INCLUDED: The Labconco 7455101 CentriVap 12-13 mm Acid-Resistant Rotor includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph 036110235 Hei-PLATE Mix 'n' Heat Expert Basic Sensor Package, 135mm Plate Temperature Range (more) 20 to 350°C Speed Range 100 to 1,400 RPM Stirring Capacity 20L Features - Comprehensive safety features including large safety distance and visual residual heat indicator - Automatic stir bar detector for hassle-free operation - Rotational direction setting for optimal sample mixing - Three-stage setting for stirring speed startup behavior - Programmable ramps and individual profiles for increased precision and reproducibility of experiments - Compatible with Pt1000 temperature sensor and double sensor for simultaneous measurement in sample and bath liquid - Three heating modes: FAST for quick heating, PRECISE and PRECISE+ for exact temperature control without overshoot - Multiple interfaces to ensure compatibility with your lab's data management system The magnetic stirrer Hei-PLATE Mix 'n' Heat Expert convinces with its intuitive handling: Thanks to respectively one display per main function (stirring and heating), you have an easily legible eye on all values and settings at any time. The handling is made via two push-and-rotary controls with LED-rings for an easy identification of the active functions. Separate timers for heating and stirring functions create flexibility and let you control your experiments better. The user-friendly menu navigation makes working with this device particularly easy. For controlling the temperature, you can choose between three heating modes: FAST for a particularly quick heating, as well as PRECISE and PRECISE+ for a particularly exact control of your target temperature without overshoot - this is how sensitive samples are optimally protected. Therefore, the device is compatible with the temperature sensor Pt1000 as well as the double sensor Pt1000 that allows the measurement in your sample and in the bath liquid simultaneously. For the stirring speed, there is a three-stage setting (start-up behavior). Furthermore, you can set the rotational direction of the magnetic stirring bar and benefit from the automatic stir bar detector. As a result, your sample is optimally stirred at any time, even when there are irregularities while stirring. This magnetic stirrer is equipped with the most important safety features. The large safety distance between the heating plate and the control panel, as well as the visual residual heat indicator at temperatures 50 °C, protect against burns. The patented Kera-Disk® plate made of anodized aluminum is chemical-resistant, scratch-resistant and has a diameter of 135 mm. This makes it suitable for the use with many accessories and samples on a small footprint. Moreover, the material used allows the fastest heating times.Click Here to View Product Video INCLUDED: The Heidolph 036110235 Hei-PLATE Mix 'n' Heat Expert Basic Sensor Package, 135mm Plate includes: - Magnetic Stirrer Hei-PLATE Mix'n'Heat Expert (135 mm diameter) - Pt1000 Temperature Sensor - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty

The Watson Marlow 405 Pump provides users with digital control over a two-channel precision pump. Th (more)is high flow laboratory pump has a speed range up to 200 rpm with a flow rate up to 370ml/min per channel. This microprocessor controlled, dual channel peristaltic pump is easy to control from the upfront digital keypad, allowing users to start, stop, reverse direction, control speed level, and initiate rapid priming. This digital lab pump is built for use with 1.6 mm tubing in sizes 12, 13, 14, & 16 (0.5 – 64.8 mm bore) and spring-loaded track to maximize tube life and flow precision against pressures up to 2 bar. The pump comes with pumphead designed with twin four roller rotors, spring loaded track, and adjustable occlusion lever allowing two individual channels of flow.

Gynkotek  P 580 A HPLC Pump & Dionex UVD 170S UV Detector System This was removed from a un (more)iversity lab where it was surplus to requirements. The system powers up but has not been tested further. It is in reasonably good cosmetic condition with marks from use. It comprises of; 1 x Gynkotek HPLCType - P 580A 1 x Dionex UVD 170SPN - 6068.4000A 1 x Dell Optiplex G1 with Keyboard & MouseModel no. MMPChromeleon Client Version 4.20 Build 350 1 x Box including:-Gynkotek HPLC Pump Series P580 Operating InstructionsGynkotek HPLC UV/VIS Detector UVD 170S/340S Operating InstructionsChromeleon Chromatography Data Systems Version 4.20 Software CD & Tutorial

Julabo ED with Julabo F25 Refrigerated Circulator Water Bath This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and is in good working order. (Thermometer used for testing not included). It is in good cosmetic condition with minor marks from use.

Beckman Optima XL100K Ultracentrifuge Lab This item was removed from a university where it was surpl (more)us to requirement. It is in good cosmetic condition and in good working order. Also includes the following: Sorvall AH-629 Rotor RPS40T-832 Rotor Neither rotor includes the vial buckets.

Scale HY10.H for statistic control Scales HY10.PGC series is equipped with module for control of pac (more)ked goods. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after pre-defined quantity of packages (samples) has been controlled. Number of the packages is fixed by scale program depending on product batch size. Scales features 10,1" colourful, graphic touch screen display and full alphanumeric keyboard aiding scale operation and setting control parameters. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scales memory and at the same time it can be printed by printer connected to the scales. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).