Showa Optronics Co Laser System With Olympus FV10-COMB Lab

Wyatt Mini Dawn Treos WTREOS-08 Laser Photometer Model WTREOS-08 Untested equipment

Genapta Laser Enable and Disbale Units & Single Photon Counting Box This system was removed from (more) a university lab where it was surplus to requirements. All the units power on but we were unable to test any further. They are in a reasonable used cosmetic condition with marks from use.

This Rarecells Diagnostics Device was removed from a laboratory where it was surplus to requirements (more). The item powers on and is in a reasonable used cosmetic condition. We were unable to test it at our facility. It requires a 24v 5-pin power supply (not included).

Showa Optronics Co Laser System With Olympus FV10-COMB This system was removed from a university lab (more) where it was surplus to requirements. The system powers up but has not been tested further for safety reasons. Included are the following; Olympus FV10-COMB Showa Optronics Co GLS3135 LaserShowa Optronics Co GLS3135 PSU Showa Optronics Co GLG7000Melles Griot 05-LHP-991

SARTORIUS BIOHIT 8-channel mechanical pipette - 30 to 300 μl 30 to 300 μl variable volume micropipet (more)te Multichannel (8 channels) Reference: 728140 Not calibrated

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Weighing capacity: 120 g Readability: 0,0001 g Linearity: ± 0,0003 g Reproducibility: 0,0002 g Stabi (more)lization time: 3 s Adjustment options: Internal calibration (automatic), Adjusting with internal weight (manual) Dimensions weighing surface (Ø): 91 mm Dimension (WxDxH): 213 x 333 x 338 mm Weight: 7 kg

The unit was removed from a university lab. It has not been tested at our facility. This job lot of  (more)items comes from a university lab, The items were no longer required. None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; Enraf Nonius Goniometer Control UnitType 0590.821Serial No. 042 Enraf Nonius main processing unitType 1546.801Serial No. 19-19 Jobin Yvon Horiba PC without HDD Bruker Nonius X-Ray ControlType 1590.830Serial 24-04 Enraf Nonius Delft x-ray station with Thomson Tubes X-Ray Head Enraf Nonius Pocket TerminalSerial No. 69786R 2 x Huber mechanical adjusting blocksPart Nos. D83253 D8219 4 x Software disks Cad4- PC Software V1.5c 3.5 Connecting cables and data leads

Ohaus ISTHBLHTS Heated Thermal Shaker The Ohaus ISTHBLHTS Thermal Shakers is designed for applicati (more)ons that require consistent and precise results. With heating and shaking capabilities. These shakers use interchangeable blocks to accommodate a wide variety of tubes and microplates. The easy-to-use, 4.3", color, LCD touch screen allows the user to save and visibly track progress through the live status bar for five user defined programs, each with five individual steps. The unit's enhanced electronics and dual temperature sensors provide accurate, dependable temperature settings across the operating range with a temperature accuracy of ± 0.5° C between 20° C and 45° C; ± 2° C below 20° C and above 45° C. The ISTHBLHTS is designed for applications that require consistent and precise high-speed shaking with temperature control to 100° C. With heating and shaking capabilities, our shakers use interchangeable blocks to accommodate tubes and microplates. Intuitive LCD touchscreen allows the user to save and track progress of 5 user-defined programs, each with 5 individual steps. Enhanced electronics provide dependable temp. settings across the operating range. Program control capabilities allow user programmable operation for automated use and memory. Storage for five separate, 5-step programs, or unlimited if using the USB. Enhanced electronics provide accurate and dependable temperature settings across the operating range. The USB port allows for easily transferring test data to a flash drive for data logging and storage. Also ideal for program storage and performing software updates.Click Here to View Product Video INCLUDED: The Ohaus ISTHBLHTS Heated Thermal Shaker includes: - 1.5mL Block - Clear Rack - Cover - Hex Head Screwdriver - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISTHBLHTS Heated Thermal Shaker Specifications Temperature Range4° C above ambient to 100° CTemperature Accuracy± 1° C between 20° C and 45° C± 2° C above 45° CSpeed Range300 to 3000 rpmSpeed Accuracy± 2%Timer1 minute to 99 hours, 59 minutesOrbit3 mm (0.12")Cooling Rateabove ambient 2-3° C/min; below ambient 0.5-1.0° C/minHeating Rate5° C/minOverall Dimensions (L x W x H)10.25 x 9.75 x 5.2" (26 x 24.8 x 13.2 cm)Ship Weight11.9 lbs (5.4 kg)Request a Formal Quote

Hermle OLEUM Oil Testing Centrifuge, 230V ONLYThe OLEUM Oil-Testing Centrifuge is our stand alone oi (more)l testing centrifuge for pear shaped or conical ASTM oil testing tubes. A 4-place swing out rotor reaches up to 3,000rpm, or 2,213 xg to determine the water content of your oil sample. The OLEUM is equipped with a maintenance-free induction motor, stainless steel chamber, motor driven lid lock, and active imbalance detection and shutdown. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. INCLUDED: The Hermle OLEUM Oil Testing Centrifuge, 230V ONLY includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty