Olympus Lext OLS3100 Confocal Microscope w/ MM6-ASPS Controller & OLS3000 PSU

This Leica TCS SP 2 Confocal Microscope System was removed from a university lab due to a fault. The (more) university reported "Apparently it was a computer issue, in that the computer failed and would no longer talk to the confocal and nothing could be done to remedy the issue since Leica wont support it, I’m told the actual microscope and lasers are fine (if old!)" From our assessment, the microscope appears to be fully working and it could be split from the main system and used on its own. The controllers etc for the automated stage also appeared to work fine. It is just the AOBS head and control system that doesn't want to communicate with the PC. The system has been fully connected up at our facility. We have replaced the PCi card but that did not generate any success either. When starting the Leica PC program it shows the following message: "AOBS Crystal Ctrl (2)" reports 0 unlocked PLL channel(s)! Please lock channel(s) or reset controller. The AOBS is the scanner head which is attached to the main control desk. We have also tried the system with another identical head that we have in stock. That gave us exactly the same result. It is sold for spares/repairs. Please note that the marble table in the photos was retained by the lab.

Leica Microsystems Type - TCS SP2 Confocal Microscope System This was removed from a university lab  (more)where it was surplus to requirements. What is included is in good working order, but the system is not complete. It is missing the following; Table topCooling unitMicroscope isolation tableCameraFlexi tube for prior unit.Bulb for prior unit.There may be more missing parts, but we are unable to confirm. It is in good cosmetic condition with minor marks. Included are; Leica TCS SP2 MicroscopeModel: RCS SP2Serial#: 142400026 Attached to microscope:Leica ∞/0.17/E HCX PL APO 40x/1.25-0.75 OIL CS Leica ∞/-/C HC PL APO 20x/0.75 Leica ∞/0.17/E HC PL APO 10x/0.40 CS 2 x Eyepieces HC PLAN S 10x/22 Leica Condenser 0.53 S 23 (521500)Leica C Mount Adaptor 0.5x : 1/2" = 16 (541511) All other items included: Prior Lumen200Model: L200/CSerial#: 70808 Ernst Leitz Wetzlar GmbhType: 307-072.45Hg 100 W Bulb Leica Power Supply for DiodeLaser COH 405nm, 25mWPart#: 1530910001 03 Leica DM R ManualLeica Confocal SoftwareLeica TCS User Manual Leica PC with Software installed. Leica Dust cover for Microscope and PC.

Leica DM2500 Confocal Microscope System w/ Application Suite X Software Lab This system was removed  (more)from a laboratory where it was surplus to requirements. The client has stated the following: "The systems are fully working and Leica still offer user support for the systems if the new owners so wish. "The system is in good cosmetic condition. All units power up and communicate through the included Leica Application Suite X software.However, there is no camera included, so microscope images cannot currently be viewed via the PC. The system consists of: - 1 x Leica DM2500 microscope - Fitted with: - 1 x Leica 1531144511 Stage - 1 x Leica 11504058 Lamp - 1 x Leica 15-6504-202 Light Supply - 1 x Leica 1531323 Mirror Junction Box - 2 x Leica 507802 HC PLAN 10x/20 Eyepieces - 1 x Leica 507902 ACS APO 10x/0.30 CS Objective - 1 x Leica 507900 ACS APO 63x/1.30 OIL CS Objective - 1 x Leica EL6000 BZ02 with Lightpipe (LCD screen may be faulty, lamp timer not functional) - 1 x Leica TCS SPE Laser Head with Leica Supply Unit RGBV - 1 x Life Imaging Services 'the box' environmental chamber (with 2 x hoses) - 1 x Speirs Robertson Isolation Plate (75cm x 90cm x 5.5cm) - 1 x HP Z420 PC with 2 x Monitors, Keyboard & Mouse (running Leica Application Suite X 3.1.2.16221) - Includes Leica TCS SPE to SPE II USB licence stick

Zeiss LSM 510 Meta High Resolution Confocal Microscope System This was removed from a university lab (more) where it was surplus to requirements. The units are all generally in reasonably good used cosmetic condition. All parts do power up individually but we could not get the system to run. We believe there should be a PC containing software that we do not have. The lab believed it was suitable to sell only for spares/repairs. The system consists of: 1 x Zeiss Axioskop 2 FS mot Microscope (452314)Fitted with:1 x Zeiss LSM 510 Meta VIS/NLO 1305-590 Scan Head. 1 x Zeiss 1320-560 Fitted with:1 x HBO 100 Lamp1 x Zeiss NDD2 1104867 Detection Module.1 Zeiss NDD3 1104-867 Detection module. 1 x Zeiss 1269-455 Switching Mirror, Fitted with:1 x HAL 100 Lamp1 x Zeiss 1058-431 Transmitted Light Channel LSM/Pascal. The following filter cubes are fitted: 1 - None2 - FITC3 - unreadable4 - DAPI5 - NDD The following objectives are fitted: 1 x Zeiss W Plan-APOCHROMAT421462-990040x/1.0 DIC VIS-IR∞/0 1 x Zeiss 44 00 39ACHROPLAN10x/0,30w Ph1∞/0 2 x Carl Zeiss W-Pl 10x/23 1016-758 Eyepieces. 1 x Zeiss Laser Module RGB 1373-790.Unit appears to be dated Nov 07. 1 x Zeiss Remote LSM 510 R3.5/LSM LIVE 1260-157. 1 X LUIGS & NEUMANN Microscope Remote. 1 x Carl Zeiss 1128-574 SNT 12V 100W Power Supply. 1 x HBO 100 Power Supply. 1 x Carl Zeiss 1298-260 Safety Box. 1 x LASERMODUL NIR. 1 x Carl Zeiss RT-PC 2720.Not sure if this is a spare for the one inside the LSM unit?It does power up and run. The white bench is not included.

Olympus Lext OLS3100 Confocal Microscope w/ MM6-ASPS Controller & OLS3000 PSU This was remo (more)ved from a university lab where it was surplus to requirements. All parts power on and appear to be in working condition. The control unit and emergency stop button are working correctly. The stage control appears to be working correctly with a smooth motor. Only the cables shown are included. The system is in good cosmetic condition, but the rubber foot ends are crumbling. There is no software included with the system. Items included:Main Units:Olympus Lext OLS3100Dimensions: 464(W)x559(D)x620(H)mmWeight: 56.5kg Olympus MM6-ASPS ControllerDimensions: 381(W)x304.8(D)254(H)mmWeight: 14.33kg Olympus OLS3000 Power SupplyDimensions: 355.6(W)x177.8(D)355.6(H)mmWeight: 9kg Accessories:Olympus U-DICROlympus U-P03Olympus U-AN360-3

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

Beckman Coulter Optima L-100 XP Ultra Centrifuge This item was removed from a university laboratory  (more)where it was surplus to requirements. It is in good cosmetic condition with minimal signs of general use.The unit reached its maximum rotor speed of 32,000 rpm quickly and consistently, and temperature testing confirmed it reached both 0ºC and 37ºC without issues. The lab confirmed it was in good working order prior to removal Specifications:- Model: Optima L-100 XP - Rotor Max Speed: 32,000 rpm - Temperature Range Tested: 0ºC to 37ºC In good working condition with efficient rotor and temperature functionality.

LABORATORY OVEN SLW SMART POL-EKO SLW - FORCED AIR CONVECTION The SLW series laboratory ovens are de (more)signed to reach high temperatures, up to 300 °C. Available from 15 to 1000 liters with latest generation control, quality materials and top-class performances. Large touchscreen, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading and you will be amazed. ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use, just like your smartphone. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - 4,3", clear, full colour touch screen - USB and LAN ports for data transfer - multi-segment time and temperature programs - loop function up to 255 times or endless - adjustable start delay feature - adjustable ramps - recording of min, average and max temperature value for each segment - overview of set and current parameters while operating - operating in temperature or time priority mode - fan speed control in the range of 0 … 100% or 10% … 100% (depending on the chamber capacity) - temperature sensor fail alarm - possibility of temperature calibration by the User - power failure control system (program continued after restoring power) - visual and sound alarm - internal memory for programs and data storage - operating with gloves on - event registry - user manual for direct download QUALITY FIRST Resistant. Durable. POL-EKO ovens are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The SLW SMART series ovens are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Powder coated sheet metal structure (graphite front panel) - Stainless steel interior - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +105°C) SLW SMART SERIES The 10 models of the SLW series cover most of your needs: from mini oven to the 1000 liter internal volume model. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for incubator models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your oven with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

If you buy a WLY series balance by July 31, 2024, you will receive each of these products along with (more) a FREE lifetime license for the Workflow Module. Precision Balance WLY Fast and accurate weight determination thanks to the duo: the WLY multifunction balance and the PUE7 weighing terminal. Ease of operation and maximum automation of the weighing process. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations and differential weighing. The power of WLY’s working mods. Use the potential Barcode scanners, receipt printers, label printers, RFID readers, PC equipment or an additional weighing platform – thanks to multipurpose software, WLY balance can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. DIY with WLY With WLY you will Do It Yourself: You will program on-screen keys and functional keys You will program infrared proximity sensors You will design printouts You will design text data that is displayed in an indicator display. This balance is the result of a combination of our experience and true precision. Want to generate labels? You can. With Label Editor software, you will generate: Standard labels for single products C labels for cumulative containers CC labels for containers with cumulative containers. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

HX7.4P2 H is a beam scale made of stainless steel. 4-load-cell, 2-component mechanical design stands (more) for high measurement accuracy. The weights may be loaded onto the pan using a forklift or a transporter crane, supplementary handles significantly facilitate the transport. The device has been fitted with a 7" colour display and a diode bar graph. Blinking green and red diodes show current load mass, the mass is presented in reference to the scale range or declared minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Motic AE2000 LED Binocular Inverted Microscope Magnification Range 4x to 20x Optical System Colour C (more)orrected Infinity (CCIS) Illumination 3W LED Features - Entry level model of Motic's inverted microscopes - Designed for routine live cell inspection with an easy and flexible set up - Offers superior image quality when viewing cell cultures in microbiology, living organisms, and tissue - Switch from Brightfield to Phase Contrast by a simple push of the phase ring slider - Fixed stage plate carries a glass or metal insert for quick overview and comfortable change of objectives - Coaxial coarse and fine focusing system with tension adjustment - Fine focus precision of 2 μm - Auto ON-OFF illumination function via built-in IR-sensor - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) The AE2000 is a revolutionary design that is packed with features and sets a new benchmark in affordable inverted microscopy. The AE2000 microscopes are Motic’s entry models of inverted microscopes, providing a flexible optical concept to meet best image quality and robust design for a long lifetime under rough lab conditions. This version of the Motic AE2000 is an inverted microscope with a binocular head and 4X, 10X and 20X objectives. The AE2000 is the perfect microscope for routine microbiology in clinical and pharmaceutical laboratories, also offering best options for university teaching. In full accordance with Motic’s CCIS Infinity System, the LWD Plan Achromatic objectives with an ingenious Phase contrast concept deliver a remarkable image quality. 10X and 20X Phase Contrast objectives are an integral part of all standard packages, while the optional 4X Phase objective is dedicated to fast screening. A 40X Phase objective is available too. The AE2000 stand carries a quadruple nosepiece with a precise click stop of objective positions. Rich illumination power is given by the 30 Watt Halogen light source in a Fixed-Koehler setup, simply interchangeable with 3W LED modules of different color temperatures. INCLUDED: The Motic AE2000 LED Binocular Inverted Microscope includes: - Widefield High Eyepoint Eyepiece N-WF 10X / 20mm - Side Facing Quadruple Nosepiece - PL PH 4x, PL PH 10x, and PL PH 20x Objectives - Phase Slider Ph0, BF, Ph1 - Centering Telescope & Keys - Plain Stage with Metal & Glass Inserts - 45mm Blue, Green and Neutral Density Filters - ELWD Condenser N.A. 0.30 (WD = 72mm) with Filter Holder - Allen Hexagonal Key and Vinyl Dust Cover - 3W LED with Intensity Control - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty