Nikon Eclipse E200MV Pol E Polarizing Light Microscope 4x 10x 20x 40x + DP23 Camera

This Bio-Rad Universal Hood II Gel Doc Imaging System was removed from a university lab where it was (more) surplus to requirements. The unit powers up and is in good working order. There is no camera included. It is in good cosmetic condition with some minor marks from use.

Canon XF305 HD Video Camera with Charger w/ Power Adapter This Video Camera was removed from a unive (more)rsity lab where it was surplus to requirements. The item is in reasonably good cosmetic condition and is in full working order. Accessories included: Carry BagPower leadData transfer cableLens cap

Canon XF305 HD PAL Video/Camera Camcorder and Manfrotto 520 MVB Tripod This item was removed from a  (more)university where it was surplus to requirement. It is in good cosmetic condition and in good working order. The unit has been etched with the previous owner's identity. This has been hidden from the photos to protect the client. Also included are the following: 1 x Charger Power Adapter CA-930 No. CAG1 x Manfrotto 520MVB tripod and head No. 520MVB/KJ051 x Shoulder soft carry bag for the camera1 x Shoulder soft carry bag for tripod1 x Power lead1 x Data transfer cable1 x Lens cap

Infinity 1 Microscope Camera With Software Lab This item was removed from a university where it was  (more)surplus to requirement. It is brand new and sealed in its original packaging. Included software: Infinity Analyze - Complete Image AnalysisInfinity Capture - Basic capture and video

This JEOL JEM2011 is being sold on behalf of a university lab where it was surplus to requirements.  (more)The system is was decommissioned in August 2023. The scintillator in the Gatan Multiscan Camera is coming to the end of its life and the Oxford EDX system has not been used in a very long time as the lab was unable to source a PC with the right connectors to support it. The pole piece is URP22_11. The system has now been decommissioned by JEOL and is ready for collection in Fife, Scotland. - JEOL JEM2011 transmission electron microscope, 200 kV operation, LaB6 or W filament - Oxford INCAx-sight/Oxford Link ISIS EDX system - Gatan Multiscan 794 CCD camera, 1024 x 1024 pix The system is sold for spares. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Nikon Eclipse Ni Microscope With Infinity 3 Camera Lab This system was removed from a university whe (more)re it was surplus to requirement. The microscope is in good cosmetic condition and full working order. It is fully operational with both software installed on the included PC. Includes the following: HP Desktop PC with Windows 10.Software installed:- Lumenera Infinity Analyze 7.1.1.66 imaging software. - And MicroManger 2.03. Infinity 3 camera with power supply cable. Objectives: - Nikon Microscope Objective - Plan Fluor 10X/0.30 Ph1 DLL ∞/0.17 WD 16.0 - Nikon Microscope Objective Plan Fluor 20X/0.50 DIC M/N2 ∞/0.17 WD 2.1 - Nikon Microscope Objective Plan Fluor 40X/0.75 Ph2 DLL ∞/0.17 WD 0.72 Eyepieces: - 2 x Nikon C-W10xB/22

Compass CX221 portable scale Ohaus The Compass CX series has been designed to have the highest possi (more)ble energy efficiency, in fact it offers you a battery life of up to 1,000 continuous hours, allowing uninterrupted operation. Slim, stackable and lightweight design, the CXs fit into lab, industrial, educational and even home environments. Simplified two-button operation makes it a breeze to use and the large backlit LCD display allows for easy viewing of weighing results. Applications Weighing, Display Hold Screen Liquid crystal display (LCD) with backlight Operation 3 x AA batteries (included) or AC adapter (not included) Communication Unavailable Construction ABS housing, stainless steel tray, transport lock, non-slip feet Characteristics of the project Stability indicator, mechanical and software overload / underload protection, low battery indicator, automatic shutdown

Texol Genysis NitroGenerator Nitrogen Generator This item was removed from a university lab where it (more) was surplus to requirements. The unit is in reasonably good cosmetic condition, with some stain marks on the top and side panels. It is mounted on four wheels and operates on a 24-volt power system, but no power adapter is supplied. When powered on, the front power light illuminated, and the programmer inside the front door displayed system information. No further testing could be carried out as the unit must be controlled by an external system. Power supply not included.

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on the weighing platform. The platform scales C315.4 series is made of mild steel powder coated construction of the weighing platform. The platform comprises 4 load cells connected to an terminal PUE C315 series featuring backlit LCD display and 5 function buttons. The weighing platform and the terminal are connected through a long cable enabling hanging the terminal on a wall. The C315.4 series is available in pit version for easy placing heavy loads on the weighing platform without application of ramps. Scales is available in dual range version on surcharge.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y.IC Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y.IC Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y.IC Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Corepoint Scientific GPF231SSS-0A3 -27C to -35C Solid Door Stainless Steel Laboratory Freezer Temper (more)ature Setpoint Range -27°C to -35°C Capacity 23 Cu. Ft. Defrost Method Automatic Features - Offers 23 cubic feet of storage, allowing for ample space to meet general-purpose freezing needs with ease. - Features a microprocessor temperature controller with a digital display, enabling precise control and verification of temperatures. - Includes an auto-defrost feature that maintains a frost-free interior, enhancing convenience and reducing maintenance efforts, despite the moderate temperature rise during defrost cycles. - Incorporates audible and visual high and low temperature alarms, ensuring the safety and integrity of stored contents. - Uses R290 refrigerant, which is environmentally friendly and enhances the unit’s sustainability. - Includes two probes, one in air and one in a sample bottle, for dual monitoring of environmental and specific sample temperatures. Enhance your laboratory's storage capabilities with the Corepoint Scientific GPF231SSS-0A3 Solid Door Stainless Steel Laboratory Freezer. This robust 23 cu. ft. unit features a durable stainless steel exterior and an easy-to-clean white-powder coated aluminum interior with a 304 stainless steel floor. It reliably maintains temperatures from -27°C to -35°C (-16°F to -31°F) with a digital display microprocessor for precise control. Key features include audible and visual temperature alarms, an auto-defrost system that minimizes temperature fluctuations, and dual temperature probes for accurate monitoring. Equipped with four swivel casters for mobility and a hydrocarbon natural refrigerant (R290), it combines environmental responsibility with performance. This freezer is an ideal choice for laboratories requiring stringent temperature management and security in their cooling solutions. INCLUDED: The Corepoint Scientific GPF231SSS-0A3 -27C to -35C Solid Door Stainless Steel Laboratory Freezer includes: - 3 Adjustable Shelves - 4 Swivel Casters - Key for Door Lock - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty