Motic PSM-1000E Trinocular Upright Industrial Microscope, Head Only

Head: Trinocular Eyepiece: Olympus WHK 10x/20 L Objectives: DPlan 10x/0.25, APlan 40x/0.65, SPlan Oi (more)l 100x/1.25, DPlanApo UV Oil 20x/0.80, DApo UV Oil 40x/1.30, DApo UV Oil 100x/1.30 Final Magnifications: 100x, 400x, 1000x Nosepiece: Six-way Focusing: Coaxial coarse and fine control knobs Illuminator: Fluorescence and Halogen

Motic AE21 Series Trinocular Inverted Microscope w/ 3x Objectives This was removed from a universit (more)y lab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with marks from use. It is fitted with the following; 1x N.A. 0.30 condenser (WD 72mm) with halogen illumination 6v/30w. 1x Centerable PH slider supplied with phase ring PH 1 2 x Eyepieces - W10x/20 3 x Objectives: 1x Motic E Plan LWD PH 20x/0.40 ∞/1.1 WD 5.5 1x Motic E Plan PH 10x/0.25 ∞/1.1 WD 6.3 1x Motic E Plan 4x/0.10 ∞/1.1 WD 14.2

JEOL JSM 840A  SEM Scanning Electron Microscope System This was removed from a university lab w (more)here it was surplus to requirements. The lab confirmed it was in working order prior to removal, but the control panel was removed and sold separately. It has not been tested at all at our facility but it is in good cosmetic condition with marks from use. Included are; Main unit:1 x JEOL JSM-840A Scanning MicroscopeModel: JSM-840ASerial#: EP130077 Item has attached: 1 x Oxford Instruments 6605Serial#: 09091-3390-339-521 Power Supply Unit:JEOL JSM-840A Main Power CSLModel: JSM-840A Main Power CSLSerial#: EP130077-40 Also included: JEOL PumpModel: N/ASerial#: N/AGood cosmetic condition. Lx36Wx24Hx50cm JEOL JSM-840A User Manual JEOL JSM-840A Service Case This contains: JEOL Extender MP001569-01 Various washers, fixings, screws etc.

This Olympus BX45TF Ergonomic Microscope was removed from a university lab where it was surplus to r (more)equirements. The item is in good condition and all dials are fully functional. However, it is missing the left eyepiece rubber cup. Objectives included: Olympus UPlanFI - 10x/0.30 ∞/-Olympus UPlanPL N - 100X/1.30 Oil ∞/0.17/FN26.5 Eyepieces included: 2 x Olympus WH12.5x/16mm

Microscope trinocular inverted Oxion OX.2053-PL with stage mechanical PL 10/20 / 40x, 5 W NeoLED ™an (more)d with carrying case. SPECIFICATIONS EYE Plan eyepieces DIN wide field HWF 10x / 22 mm HEAD Head trinocular, inclined 45 °. Adjusting the interpupillary distance on the tube-holder left eyepiece • The interpupillary distance is adjustable from 54 to 75 mm • Output trinocular upright for photo/video and selector image 100:0% and 80-20%. REVOLVER HOLDER OBJECTIVES Revolver holder objectives quintuple oriented towards the interior. OBJECTIVES • Objectives long working distance (LWD) Plan with correction to infinity. Factors of increased 10x/0.25, 20x/0.40 and 40x/0.60. All the optics are coated with anti-fungal and anti-reflective to obtain the maximum performance of the light APPROACH Controls, macro focus and fine on-axis coaxial. Precision 2 μm, a total distance of approximately 24 mm. STAGE Plate 250x230mm with stage mechanical X-y 120 x 78 mm Is supplied with the following accessories: · Metal plate for Ø 35mm for the crop. · Plate for fastening of preparations of 76x26mm. · Glass plate. CAPACITOR A. N. 0.30 iris diaphragm. Working distance 72mm. LIGHTING Transmitted 5W LED with adjustable intensity and internal transformer for 100-240V power. Fuse 3.15 A / 250V. PACKAGING Supplied with power cable, cover anti-dust and manual of instructions.

Motic PA43 BIO PH Trinocular Upright Biomedical Microscope Objectives Plan UC 4X, 100X & Plan UC (more) PH 10X and 40X Optical System Scalable Infinity-Corrected(CCIS) Illumination Köhler Halogen 30W and LED 3W Module Features - Kohler illumination with option of Halogen or LED illumination - An automatic power-saving mode is engaged whenever an operator leaves temporarily. - Consistent, even Illumination with IL Function to ensure high quality imaging. - The rackless stage of the PA43 offers smooth movement of the stage with zero-backlash. - Meets a wide variety of application needs including pathology, cytogenetics, hemataology, and toxicology. - Specially designed non-cover glassed objectives are available separately as part of the PA43’s accessory lineup. The PA43 BIOMED is a new series from Motic Scientific, and represents a large step forward in combining modularity with ergonomics to improve application imaging workflows. A progression into routine work, this new microscope’s robust design and solid footprint does not compromise on optical quality and features. Its modularity offers flexibility when choosing a configuration that suits multiple end-user applications--from cost-effective solutions, to high-quality optical systems for lab diagnostics. The microscope is not only modular but also flexible in design, and can be upgraded at any time. INCLUDED: The Motic PA43 BIO PH Trinocular Upright Biomedical Microscope includes: - Plan UC 4X, 100X Objectives - Plan UC PH 10X and 40X Objectives - Wide-field eyepiece 10X/22mm - Rackless Stage - Kohler Illumination 30W - LED 3W Module - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Unlike conventional spectrophotometers the Agilent 8453 does not suffer from ambient false light. Th (more)e open sample area makes it easier to access for cuvette handling and to connect tubing to a flow cell or thermostatable cell holder. The spectrophotometer is shipped with the standard single- cell holder. Standard and accessory cell holders can be removed and replaced in seconds with few or no tools. The light source for the UV wavelength range is a deuterium lamp with a shine- through aperture. As a result of plasma discharge in a low pressure deuterium gas, the lamp emits light over the 190 nm to approximately 800 nm wavelength range. The light source for the visible and SWNIR wavelength range is a low- noise tungsten lamp. This lamp emits light over the 370 nm to 1100 nm wavelength range.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Moisture analyzer is a laboratory measuring instrument intended to determine relative humidity for s (more)mall samples of different materials. MA.R series redefines moisture analyzers standards. The MA.R series This series has been equipped with brand new readable LCD display providing an extra text line for information such as supplementary messages and data, e.g. product name or tare value. The moisture analyzer, using respective pictograms, signalizes currently activated mode, computer connection and functions, both balance and service ones. The MA.R series is enriched with various interfaces: RS232, USB type A, USB type B and Wi-Fi. The moisture analyzer is housed in a plastic casing. Databases: Information system of R series moisture analyzers is based on 6 databases, allowing many operators to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 6 databases: Users (up to 10 users) Products (up to 1000 products) Weighings (up to 1000 weighings) Tares (up to 100 tares) Programs (up to 100 drying programs) Drying process reports (up to 1000 reports) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Exchange of information within the system is performed by means of USB port on bi-directional basis. It is possible to import and export databases using memory sticks. Direct access to information It is possible to access functions and databases directly, using keyboard soft keys. Database – access to databases Function – access to basic functions F1 and F2 – programmable function keys and menu navigation keys Reports – access to database of drying process reports Profile – access to parameters settings Sample – access to products database

IKA ROTAVISC hi-vi HELI Complete Viscometer Viscosity Measuring Range 200 to 80,000,000 mPas Viscosi (more)ty Accuracy (FSR) ±1% Speed Range 0.01 to 200 rpm Features - Ensures measurement accuracy of ±1% of the measuring range with repeatability of ±0.2% - Measures viscosity from 200 to 80,000,000 mPas, suitable for a broad range of applications - Allows for stepless speed adjustment from 0.01 to 200 rpm for precise control - Built-in graph function for real-time data visualization - Equipped with overload protection for safe operation in harsh environments - Supports both timer and continuous operation modes - Ideal for high sample throughput, frequent spindle changes, and use in varying locations - Offers connectivity for data logging The IKA ROTAVISC hi-vi I HELI Complete is designed to determine the viscosity of highly viscous liquids in applications ranging from laboratories to quality control. It features an intuitive 4.3″ TFT display for easy operation, supported by a digital spirit level for correct setup and a simple ramp function for repetitive tasks. The device ensures high measurement accuracy with a precision of ±1% for both Newtonian and non-Newtonian fluids, and a reproducibility of ±0.2%. The ROTAVISC offers stepless speed adjustment for versatile use. Additionally, the motorized IKA HELISTAND enables uniform up-and-down movement of the viscometer in the sample, enhancing the viscosity measurement process. The package includes a standard spindle set (SP 7-SP 12), a protective bracket, a temperature sensor, and the HELISTAND stand with a T-spindle set, covering a viscosity measuring range of 200 to 80,000,000 mPas. Click Here to View Product Video INCLUDED: The IKA ROTAVISC hi-vi HELI Complete Viscometer includes: - ROTAVISC hi-vi I HELI Complete - SP set-2 - PT 100.8 - HELISTAND - T-SP-SET - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle OLEUM Oil Testing Centrifuge, 230V ONLYThe OLEUM Oil-Testing Centrifuge is our stand alone oi (more)l testing centrifuge for pear shaped or conical ASTM oil testing tubes. A 4-place swing out rotor reaches up to 3,000rpm, or 2,213 xg to determine the water content of your oil sample. The OLEUM is equipped with a maintenance-free induction motor, stainless steel chamber, motor driven lid lock, and active imbalance detection and shutdown. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. INCLUDED: The Hermle OLEUM Oil Testing Centrifuge, 230V ONLY includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Edwards T-Station 300D Dry Turbo Station CF100, 200-240V Ultimate Pressure 5×10-10 mbar Inlet Connec (more)tion DN 100 CF Leak Tightness <1x106 mbar l/s Features - Color touch screen control with local graphical display and audible leak detection - Wireless models allow simultaneous control of up to 10 leak detectors - Low weight and integrated carry handles which allow it to be bench top or trolley mounted - Allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface - Ensured by class leading 180° mass spectrometer nEXT T-StationThe Edwards turbomolecular pumping stations are a comprehensive range of products providing versatile vacuum solutions in many different applications. All our nEXT turbomolecular pumping stations are supplied fully assembled and ready to run straight out of the box with nEXT turbomolecular pumps and backing pumps that are user serviceable. There are 2 models in the turbomolecular pumping stations range the entry level T-Station 85 and the higher capacity T-Station 300.Both the T-Station 85 and the 300 come with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. With the ability to control one of our active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, the T-Station 85 ideal for general laboratory needs and the T-Station 300 extending the performance envelope for the R&D sector.nEXT T-Station 300Our T-Station 300 builds on the existing popular T-Station 85 platform, by replacing the nEXT85H with the nEXT300 turbomolecular pump providing a solutionfor customers and applications that require a higher pumping speed up to 300 ls-1.INCLUDED: The Edwards T-Station 300D Dry Turbo Station CF100, 200-240V includes: - One Year Manufacturer's Warranty