Motic PA43 BIO PH Trinocular Upright Biomedical Microscope

This listing is for a Leitz Microscope Lamp Drive. The unit is in full working condition and is rea (more)dy for immediate release. The Leitz Microscope Lamp Drive is a crucial component found in several Leitz microscope models, including the Leitz Laborlux S and Leitz Wetzlar SM. It serves as the power and control unit for the microscope's light source, vital for specimen illumination during observation. Key Features: Functionality: The lamp drive powers the light source, allowing for adjustable illumination levels to enhance visibility and contrast of the specimen. This is particularly important for applications like histology and material science, where lighting can significantly affect image quality. Compatibility: Designed specifically for use with Leitz microscopes, the lamp drive’s compatibility can vary by model. Users must ensure they select the appropriate lamp drive for their specific microscope configuration to guarantee optimal performance. Availability: The lamp drive may be included with the initial purchase of a Leitz microscope. Alternatively, it can often be purchased separately as an accessory or replacement part, making it convenient for maintenance or upgrades.

Carl Zeiss 47 16 90 Polarisation Microscope with 2 x Objectives This was removed from a university  (more)lab where it was surplus to requirements. The item powers on and both objectives are clear and in working order. It was powered up using an in-house Zeiss power supply (not included). It is in good cosmetic condition with minor marks. Item includes: 1 x Plan 2,5/0.08 Carl Zeiss objective (46328 -9903)1 x PH2 NEOFLUAR 40/0.75 objective (46 07 21)1 x Carl Zeiss Lamp (46 72 59)1 x Zeiss eyepiece (46 40 44-9902)1 x Zeiss eyepiece (46 40 42-9903)1 x Ocular Lens Assembly (47 30 12 - 9901)1 x Carl Zeiss 5 Objective Nosepiece Holder (47 31 59-9902) Serial number- 070577Model number- 47 16 90-0000/13

This Olympus BX45TF Ergonomic Microscope was removed from a university lab where it was surplus to r (more)equirements. The item is in good condition and all dials are fully functional. However, it is missing the left eyepiece rubber cup. Objectives included: Olympus UPlanFI - 10x/0.30 ∞/-Olympus UPlanPL N - 100X/1.30 Oil ∞/0.17/FN26.5 Eyepieces included: 2 x Olympus WH12.5x/16mm

Motic SMZ-171-BLED Stereo Microscope with LED Illumination Stand Magnifaction Range 7.5x - 50x Opti (more)cal System Greenough Illumination 3W LED with Intensity Control Features - Binocular Microscope; 45° inclined - Widefield WF10X/20mm - +/- 5 diopter adjustments on both tubes - Greenough zoom optical system - 0.75X - 4.5X objectives - Zoom ratio: 6:1 - Interpupillary distance: 55-75mm - Pole-type stand with transmitted illumination - Black, white, and frosted stage plates and dust cover included - Coarse focusing system with tension adjustment The SMZ171 model terminates Motic’s SMZ stereo microscope line by using modern ESD resistant materials and optimized LED illuminations for a wide range of biomedical and material science applications. The optical performance with improved transmission rates in higher magnifications is combined with reliable mechanics for daily usage. The SMZ171 is an advanced stereo microscope for biomedical work and industrial quality control.Motic’s SMZ-171 is an advanced stereo microscope for a wide range of biomedical and material science applications. The Greenough system delivers crisp and clear images in a zoom range of 6.7:1. Five click-stops within the smooth zoom allow a precise reproduction of defined magnifications. The large Field of View is ensured by the 10X/23 eyepieces. The working distance of 110mm. - Total Magnification Range options: - 10x eyepieces = 7.5x - 50x (Included) - 12.5x eyepieces = 9.375x - 62.5x (Not Included) - 15x eyepieces = 11.25x - 75x (Not Included) - 20x eyepieces = 15x - 100x (Not Included) INCLUDED: The Motic SMZ-171-BLED Stereo Microscope with LED Illumination Stand includes: - 10x/23 eyepieces - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

PSM / ESCO AIRSTREAM PLUS (AC2-5E8-TU) 1.5m microbiological safety cabinet New equipment in its orig (more)inal packaging Complete pack including: PSM ESCO Airstrem plus class II AC2-5E8-TU length 150cm (1.5m) A UV-30A UV lamp A fixed support with leveling feet Height: 71cm SAL-5A0 GEN2 2 internal sockets TüV NORD EN 12469 certified model Automatic regulation and malfunction alarm and dry contact for alarm report Dual economical motors ensuring permanent and stable flow control Removable stainless steel worktop, with a large work surface and inclined underplane for liquid retention LED lighting Control panel with clear flow display, window position Silent operation The PSMs are equipped with 2 electrical sockets and a UV lamp Depth without armrests: 767 mm / with armrest: 823 mm Motorized front window, stops at the working position External stainless steel armrest on the entire front part Nominal size: 1.5 m External dimensions: 1645 x 767 x 1400 mm (L x D* x H) Internal dimensions: 1525 x 580 x 654 mm (L x D x H) External depth without / with armrest: 767 / 823 mm Weight: 293 kg Model: AC2-5E8-TU Gross weight: 309 kg Gross dimensions: 172 x 90 x 174 cm The sheet metal slide covers are slightly deformed at the bottom, but this does not hinder the proper operation of the PSM or the opening and closing of the window Year of manufacture: 2016

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature Range: Ambient +5° to 100°C Temperature Presets: 4 Temperature Stability: ±0.1°C Tempera (more)ture Uniformity: ±0.05°C Capacity: 19 L Heating Capacity: 1200 w Material: 304 Stainless Steel Interior dimensions (DxWxH): 305 x 387 x 192 mm Dimensions (LxWxH): 394 x 632 x 249 mm

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Polyscience P10N8A101B IP-100 Immersion Probe Cooler, 0.7 Rigid Cold Finger Probe, -100 to -60C, 120 (more)V, 60Hz3D Visualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P10N8A101B IP-100 Immersion Probe Cooler, -100°C to -60°C, 85W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Motic Panthera E2 Trinocular + BTI10 Camera Bundle Panthera E2 microscopes combine high quality mate (more)rials and precise engineering to a persistent and resilient construction. Smooth operation of the mechanics is self-evident for fast and reliable results, responsible for shifting your daily work in classroom and lab to a higher level of quality. User-friendly design, robust for tough environments and unique features grants the best performance. The Moticam BTI10 combines a space-saving camera hardware with new Wi-Fi technology. The 4MP Wi-Fi camera comes together with an 10” Android tablet to deliver fast live images (up to 30 fps) on any microscope with a vertical photo tube.INCLUDED: The Motic Panthera E2 Trinocular + BTI10 Camera Bundle includes: - 4X/0.10 (WD 30.5mm ) Objective - 10X/0.25 (WD 17.4mm ) Objective - 40X/0.65/S (WD 0.6mm ) Objective - 100X/1.25/S-Oil (WD 0.16mm ) Objective - Dust Cover - Power Cord - Allen Key - UC-WF eyepieces 10X/20mm - Moticam BTI10 - 0.35X C-Mount camera adapter - Manufacturer’s Documentation - 5 Year Manufacturer’s Warranty Motic Panthera E2 Trinocular + BTI10 Camera Bundle SpecificationsPanthera E32 Trinocular SpecificationsOptical systemColor Corrected Infinity Optical System (CCIS®)Observation tubeTrinocular head, Siedentopf type, 360° swivelingInclination25° inclined, 360° rotating (storage saving), 360° swivellingTrinocular light splitFixed 50:50Interpupillary distance48-75mmDiopter adjustmentOn both eyepieces, +/- 5 diopterEyepiecesWidefield UC-WF10X/20mm with diopter adjustmentNosepieceReversed quadrupleObjective classificationCCIS® UC Plan Achromatic (Pb free)Objectives4X/0.10 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 100X/1.25/S-Oil (WD 0.16mm)Objective mounting threadW 4/5"x1/36" (RMS standard)Stand typeUprightStageMechanical stage with built-in low position rackless coaxial stage control and sample holderStage size140x135mmTravel range X&Y75x40mmCondenserFocusable and centerable Abbe condenser N.A. 0.90/1.25 with slot for contrast slidersDiaphragmIris diaphragmFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentFine focus precision2μmFocusing stroke25mmUpper limit stopUpper limit stop preset but adjustableFilter holderOn top of the illuminatorTransmitted illuminationFixed Koehler LED 1W with intensity controlIllumination featuresNosepiece LED light intensity indicatorTransformerInternalPower supply110-240V (CE), USB 2.0 for battery packOther featuresUSB 2.0 for external camera powerDimensions LxWxH282x210x396mmNet weight7.5kg BTI10 Camera SpecificationsSensor TypeCMOSSensor Size1/3"Imaging Area5.44x3.07mmCapture Resolution Info4MP (2592x1520 pixels)Live display mode through Wi-Fi1280x720, 1920x1080 pixels (Full HD)Live display mode through Ethernet1280x720, 1920x1080 pixels (Full HD)Pixel size2.0x2.0μmScan modeProgressiveData transferWi-Fi (2.4 & 5 GHz), EthernetMax. frames per second (fps)1920x1080 @ 30 fps, 1280x960 @ 30 fps (depending on Wi-Fi strength)Exposure time0.03 msec to 0.03 secOperating temperatureFrom 0 to +60 Degrees Celsius non condensingMax. signal to noise ratio38.3dBDynamic range64.6dBSensitivity1.9V/Lux-sec (550nm)ButtonsOn/OffSupport deviceUniversal Web browser (HTML5)Supported OSWindows XP/Vista/7/8/10, MAC OSX, Android 4,0 or higher, iOS7 or higherMinimum computer requirements2GHz dualcore - RAM memory 2GB - Video memory min. 512 MBLens mountC-MountScreen10" IPS TabletSoftwareMotiConnect App for iOS and Android (pre-installed)FunctionsStill image and video capture, live and still image measurement, image adjustments, white balance, automatic & manual exposure, individual objective calibration system.Power supply12V (External Power supply)Tablet bracket holderFor tablets from 7” to 10”Package includesUSB cable, Motic 4-dot calibration slide, universal power supply 100V-240V (CE)Tablet SpecificationsSize (mm)218x136x10mmSystemAndroid 10Pre-installed AppMotiConnectLanguageMulti-LanguageCPU2.0GHz 8-coreRAM6GB DDR3NAND Flash128GBDisplay10" (IPS) 16:10 RatioDisplay resolutions1920x1200Touch PanelCapacitive Multi-Touch ScreenGPUMALI-G720 MP3PortsMicroSD/MMC/TF Card (Support up 64 GB), 3.5mm Audio, USB-C (USB OTG and Charging)Speaker8Ω/0.7Wx2MicMIC (Internal)Wi-Fi802.11b/g/nBluetooth4.0CameraFront (5M Pixels) + Rear (8M Pixels)Support display formatMPEG-1/2 (DAT, MPG, VOB, TS), MPEG-4, H.263 (3GP, MOV, MP4), H.264 (AVI, MKV, MP4, MOV, 3GP), RM, RMVB, FLV, WEBMSupport audio formatMP3, WMA, MP2, OGG, AAC, M4A, OGA, FLAC, APE, MP1, WAVPicture formatJPG, JPEG, GIF, BMP, PNGBattery3.7V/3500mAh Rechargeable BatteryPower supply tabletInput：AC100-240V. 50-60HZ - Output: DC5V 2A (Support USB port charging）CertificationsFCC CEColorWhiteComparison of ModelsSpecificationPanthera E2 BinocularPanthera E2 Binocular (w/o 100x)Panthera E2 Trinocular + BMH4000 Camera BundlePanthera E2 Trinocular + BTI10 Camera BundlePanthera E2 TrinocularPanthera E2 Trinocular (w/o 100x)Optical SystemColor Corrected Infinity Optical System (CCIS®)Color Corrected Infinity Optical System (CCIS®)Color Corrected Infinity Optical System (CCIS®)Color Corrected Infinity Optical System (CCIS®)Color Corrected Infinity Optical System (CCIS®)Color Corrected Infinity Optical System (CCIS®)Observation TubeBinocular head, Siedentopf type, 360° swivelingBinocular head, Siedentopf type, 360° swivelingTrinocular head, Siedentopf type, 360° swivelingTrinocular head, Siedentopf type, 360° swivelingTrinocular head, Siedentopf type, 360° swivelingTrinocular head, Siedentopf type, 360° swivelingTrinocular Light SplitN/AN/AFixed 50:50Fixed 50:50Fixed 50:50Fixed 50:50EyepiecesWidefield UC-WF10X/20mm with diopter adjustmentWidefield UC-WF10X/20mm with diopter adjustmentWidefield UC-WF10X/20mm with diopter adjustmentWidefield UC-WF10X/20mm with diopter adjustmentWidefield UC-WF10X/20mm with diopter adjustmentWidefield UC-WF10X/20mm with diopter adjustmentObjectives4X/0.10 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 100X/1.25/S-Oil (WD 0.16mm)4X/0.10 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm)4X/0.10 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 100X/1.25/S-Oil (WD 0.16mm)4X/0.10 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 100X/1.25/S-Oil (WD 0.16mm)4X/0.10 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 100X/1.25/S-Oil (WD 0.16mm)4X/0.10 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 100X/1.25/S-Oil (WD 0.16mm)Stage Size140x135mm140x135mm140x135mm140x135mm140x135mm140x135mmIlluminationLEDLEDLEDLEDLEDLED.comparison-table tr td:nth-child(5) { background-color: #fffacd; }