Leitz Dialux 22 Fluorescence Microscope With Camera + Control Unit Lab Faulty NOTE - THIS IS A SPARES/REPAIRS ITEM

Progressive scan type 2/3″ CCD, super-high-resolution with 1.4 million pixels (1280×1024) 5.1 cm pol (more)ysilicone TFT display for frame and focus adjustment in preview mode Camera control with handswitch, avoids vibrations of camera head and guarantees sharp images Photometric system with integral (30%) and spot (1%) metering possibility Automatic exposure adjustment with auto-exposure lock +/- 3 step compensation JPEG image format with three resolution modes 3.3 V SmartMedia (SSFDC) with 8 MB intermediate image storage without PC Direct printing to Olympus P-330E high resolution dye-sublimation printer (306 dpi) Camera control with personal computer via serial interface

Sony Solid-State Memory Camcorder Model-PMW-200 This item was removed from a university where it was (more) surplus to requirement. It is in reasonably good cosmetic condition, powers on, and has been tested with an in-house charger. Please note that it does not include a battery or charger. It will require the following to be operational: Sony BC-U1 or BC-U2 Charger/PSU.And a BP-U30/U60/90 battery pack.

Nikon OPTIPHOT-2 Microscope System with Sony CCD-IRIS Camera This system was removed from a universi (more)ty lab where it was surplus to requirements. All included item are in good cosmetic condition. The microscope powered on via test leads due to a disconnected door trip switch.Voltage selector, lamps, and stage movement are all functioning correctly. The cabinet is faulty, but the scope inside is operational. System Components: - Microscope Base: Nikon OPTIPHOT-2 with Nikon Transformer Model UN - Objectives Included: - Nikon 241187 M Plan 40/0.40 210/0 SLWD - Nikon 322002 M Plan 100 0.90 Dry 210/0 - Nikon 322580 M Plan 60 0.80 210/0 - Nikon 334439 M Plan 40 0.65 210/0 - Nikon 328356 M Plan 20 0.4 LWD 210/0 - Additional Equipment: - Bruker Infrared Microscope Power Supply - Door Trip Switch Override - Sony CCD-IRIS Camera Condition and Testing:The microscope was powered on using test IEC leads due to the door trip switch being disconnected, preventing a direct power connection.- Voltage selector is operational. - Both lamps power on as expected. - Stage movement is functioning correctly.

This JEOL JEM2011 is being sold on behalf of a university lab where it was surplus to requirements.  (more)The system is was decommissioned in August 2023. The scintillator in the Gatan Multiscan Camera is coming to the end of its life and the Oxford EDX system has not been used in a very long time as the lab was unable to source a PC with the right connectors to support it. The pole piece is URP22_11. The system has now been decommissioned by JEOL and is ready for collection in Fife, Scotland. - JEOL JEM2011 transmission electron microscope, 200 kV operation, LaB6 or W filament - Oxford INCAx-sight/Oxford Link ISIS EDX system - Gatan Multiscan 794 CCD camera, 1024 x 1024 pix The system is sold for spares. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Motic AE2000 Digital Trinocular Transmitted Light Inverted Microscope w/ Moticam BMH4000X Microscope (more) Camera Objectives 0.75X to 5X Fine Focus Precision Greenough Transmitted Illumination (FPS) Quartz Halogen 6V/30W with Intensity Control Features - Greenough optical system for enhanced clarity and precision - Allows for simultaneous viewing and imaging, with 45° inclined observation for ergonomic use - Comes with a dust cover, black/white and frosted stage plates for versatile use - Ranges from 52-75mm to accommodate various users - New materials ensure electrostatic discharge (ESD) compatibility

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature range: -9°C to -30°C Maximum fluctuation: 4.2°C Maximum gradient: 6.8°C Defrost system:  (more)Manual defrost system Cooling system: Static Capacity: 284 L Dimensions (HxWxD): 1840 x 597 x 615 mm Internal dimensions (HxWxD): 1587 x 420 x 400 mm Weight: 86 kg

MA X7.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Polyscience AD7LR-20-A11B 7L Low-Profile Refrigerated Circulator, Advanced Digital (-20 to 200C), 12 (more)0V, 60Hz3D Visualization of the Polyscience CirculatorThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience AD7LR-20-A11B 7L Low-Profile Refrigerated Circulator is intended for the precise temperature control ofsuitable liquids in a reservoir. Extremely easy to use and maintain, itcombines design innovation with highly intuitive operation to deliverconvenient and versatile liquid temperature control for a wide range ofapplications.Features Intuitive 3.75” (9.5 cm) display with touch-pad control 4 languages: French, German, Spanish, English Swivel 180™ Rotating Controller On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485 and external temperature probe On-screen prompts Automatic performance optimization and specific heat tuning Single-point calibration capability Click Here to View Product Video INCLUDED: The Polyscience AD7LR-20-A11B 7L Low-Profile Refrigerated Circulator, -20°C to 200°C, 200W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards Silencer for XDS35i Dry Scroll PumpFeatures - Compact design combines both filtration effici (more)ency and noise reduction - Integrated inlet diffuser optimizes sound attenuation - Multi-stage noise reducing features including final stage sound absorbent insert - Tubular silencing design - tube is positions to maximize attenuation and air flow while minimizing pressure drop - Patented high grade element with built-in butterfly gasket seal which creates positive seal between housing hemispheres and a new seal with each element - Seamless drawn housings - no welds to rust or vibrate apart - Durable carbon steel construction with black powder coated finish - Ability to mount vertically or horizontally The Edwards Silencer for XDS35i Dry Scroll Pump has two main functions: to reduce exhaust noise during pump down and gas ballast operation as well as to collect and retain tip seal dust as the pump is operated. Exhaust gases exit the exhaust port when the pump is being used to evacuate a process chamber, or when the gas ballast control is being used, or both. The noise level when pumping down rises as the throughput increases and the silencer is used to reduce this noise level. The outer can is made of pressed steel and is split to allow access to the filter elements. The filter element housing is made from Santoprene thermoplastic elastomer. The element itself is polyester. The foam block is manufactured from filter foam. INCLUDED: The Edwards Silencer for XDS35i Dry Scroll Pump includes: - NW25 Clamp - Centring Ring - Manufacturer's Documentation - 1 Year Manufacturer's Warranty