Leica Confocal Microscope Marble Top Isolation Table Lab

Zeiss LSM 510 Meta High Resolution Confocal Microscope System This was removed from a university lab (more) where it was surplus to requirements. The units are all generally in reasonably good used cosmetic condition. All parts do power up individually but we could not get the system to run. We believe there should be a PC containing software that we do not have. The lab believed it was suitable to sell only for spares/repairs. The system consists of: 1 x Zeiss Axioskop 2 FS mot Microscope (452314)Fitted with:1 x Zeiss LSM 510 Meta VIS/NLO 1305-590 Scan Head. 1 x Zeiss 1320-560 Fitted with:1 x HBO 100 Lamp1 x Zeiss NDD2 1104867 Detection Module.1 Zeiss NDD3 1104-867 Detection module. 1 x Zeiss 1269-455 Switching Mirror, Fitted with:1 x HAL 100 Lamp1 x Zeiss 1058-431 Transmitted Light Channel LSM/Pascal. The following filter cubes are fitted: 1 - None2 - FITC3 - unreadable4 - DAPI5 - NDD The following objectives are fitted: 1 x Zeiss W Plan-APOCHROMAT421462-990040x/1.0 DIC VIS-IR∞/0 1 x Zeiss 44 00 39ACHROPLAN10x/0,30w Ph1∞/0 2 x Carl Zeiss W-Pl 10x/23 1016-758 Eyepieces. 1 x Zeiss Laser Module RGB 1373-790.Unit appears to be dated Nov 07. 1 x Zeiss Remote LSM 510 R3.5/LSM LIVE 1260-157. 1 X LUIGS & NEUMANN Microscope Remote. 1 x Carl Zeiss 1128-574 SNT 12V 100W Power Supply. 1 x HBO 100 Power Supply. 1 x Carl Zeiss 1298-260 Safety Box. 1 x LASERMODUL NIR. 1 x Carl Zeiss RT-PC 2720.Not sure if this is a spare for the one inside the LSM unit?It does power up and run. The white bench is not included.

Leica DM2500 Confocal Microscope System w/ Application Suite X Software Lab This system was removed  (more)from a laboratory where it was surplus to requirements. The client has stated the following: "The systems are fully working and Leica still offer user support for the systems if the new owners so wish. "The system is in good cosmetic condition. All units power up and communicate through the included Leica Application Suite X software.However, there is no camera included, so microscope images cannot currently be viewed via the PC. The system consists of: - 1 x Leica DM2500 microscope - Fitted with: - 1 x Leica 1531144511 Stage - 1 x Leica 11504058 Lamp - 1 x Leica 15-6504-202 Light Supply - 1 x Leica 1531323 Mirror Junction Box - 2 x Leica 507802 HC PLAN 10x/20 Eyepieces - 1 x Leica 507902 ACS APO 10x/0.30 CS Objective - 1 x Leica 507900 ACS APO 63x/1.30 OIL CS Objective - 1 x Leica EL6000 BZ02 with Lightpipe (LCD screen may be faulty, lamp timer not functional) - 1 x Leica TCS SPE Laser Head with Leica Supply Unit RGBV - 1 x Life Imaging Services 'the box' environmental chamber (with 2 x hoses) - 1 x Speirs Robertson Isolation Plate (75cm x 90cm x 5.5cm) - 1 x HP Z420 PC with 2 x Monitors, Keyboard & Mouse (running Leica Application Suite X 3.1.2.16221) - Includes Leica TCS SPE to SPE II USB licence stick

This Leica TCS SP 2 Confocal Microscope System was removed from a university lab due to a fault. The (more) university reported "Apparently it was a computer issue, in that the computer failed and would no longer talk to the confocal and nothing could be done to remedy the issue since Leica wont support it, I’m told the actual microscope and lasers are fine (if old!)" From our assessment, the microscope appears to be fully working and it could be split from the main system and used on its own. The controllers etc for the automated stage also appeared to work fine. It is just the AOBS head and control system that doesn't want to communicate with the PC. The system has been fully connected up at our facility. We have replaced the PCi card but that did not generate any success either. When starting the Leica PC program it shows the following message: "AOBS Crystal Ctrl (2)" reports 0 unlocked PLL channel(s)! Please lock channel(s) or reset controller. The AOBS is the scanner head which is attached to the main control desk. We have also tried the system with another identical head that we have in stock. That gave us exactly the same result. It is sold for spares/repairs. Please note that the marble table in the photos was retained by the lab.

This was removed from a university lab where it was surplus to requirements. All units are in good u (more)sed cosmetic condition but they do have various signs of general use. The system consists of: 1 x Bio-Rad Radiance 2000 Laser Scanning System.1 x Bio-Rad Motorised Focus Unit.1 x Bio-Rad Optical Unit. All of the rubber on the wheels of the Radiance has broken off. The wheels do still roll though. The Bio-Rad Radiance 2000 powers up fine, but was not tested any further.

Zeiss ConfoCor 2/LSM510 Meta System Parts Faulty Lab These items were removed from a university lab  (more)where they were surplus to requirements. Due to the casing being removed from the ConfoCor 2/LSM510 we are unsure of its operational capabilities and therefore, are unable to conduct any further testing. All other remaining parts are also untested, and therefore, are sold as Spares/Repair. This system features a Class III Laser. Included is the following: - 1 x Zeiss ConfoCor 2  1228-790 - 1 x LSM510 Meta  1228-919 Channel 2 1133-991 Channel 3 1140-340 - 1 x APD Module  1056-471 - 1 x Andor/Micro Point 2205  Laser Illumination and Ablation System. - 1 x Remote Control Switch - 2 x System Interface Plates for an AxioVert 200M.  These allow the ConfoCor & LSM to interface with an AxioVert 200M Microscope. - Various connection cables.

This was removed from. a university lab where it was surplus to requirements. It seems there are som (more)e parts missing. What is included is listed below; Table/Rack on wheelsDimensions - L111 W70 H62cm Fitted inside:-Carl Zeiss ECU-LSM 5 Live PC - Powers on but the Hard drive has been removed. Carl Zeiss LSM 510 META Laser Head Casing - The casing is in bits and it looks like there are parts missing Carl Zeiss Remote for LSM 510 R3.5/LSM 5 Live Box full of all the connection cables Keyboard & Mouse Box of small parts/accessories including:-Software discs and Fujitsu Recovery DVD'sCarl Zeiss MicroImaging LSM 510 META 4.0 Software DongleSeveral USB CablesLots of small parts/accessories

Proline heating thermostat with tank Proline clear-view LAUDA thermostats have been designed for dir (more)ect observation of objects. They are ideal for use with LAUDA Scientific PVS or iVisc automatic viscometer, as the necessary temperature stability for precise viscosity determination is ensured over the entire temperature range. In addition, the two-chamber principle always guarantees a constant liquid level in the measuring chamber, regardless of the volume and temperature of the medium. PVL models with five layers of insulating glass are suitable for low temperature measurements down to -40° or -60°C when a low temperature chiller or thermostat is connected. These thermostats are available with two different control units. The Master version is designed for all applications where the parameters are not changed very often. The removable Command operating unit (PV C models) incorporates a graphic LCD screen for high operating convenience and a programmer. Notable features - LAUDA Vario Flex pump (pressure pump) with eight selectable power levels - Cooling coil fitted as standard with connection for additional cooler Accessories included Fittings for pump connection, cooling coil Specific features of the Proline PV 15 C model - Tank volume min. 11 L - Tank volume max. 15 L - Tank opening 230 x 135 mm - Bowl depth 320 mm - Usable depth 285 mm - Upper height of the tank 390 mm - State-of-the-art Command control panel, removable, for remote use; LCD display with the most advanced feature set in the LAUDA range - Pump pressure mx. 1.1 bar - Water-cooled temperature range from 20°C to 230°C - Operating temperature range from -30°C to 230°C - Pump connectors M16 x 1 - Fitting 13 Ø

Kodak DirectView CR500 Computed Radiography Single Plate Reader This item was removed from a univers (more)ity where it was surplus to requirement. This is the reader/imaging part of a radiography system, no other parts of the system are included. It is in excellent condition and powers on, no further testing has been done. The power lead is included.

Hermle 6 x 85ml High Speed Rotor (38°) The Hermle 6 x 85ml High-Speed Rotor is a centrifuge rotor c (more)ompatible with Hermle Z32-HK, Z36-HK, Z327, Z366, and Z446 series centrifuges. This rotor can accommodate a capacity of up to 6x85ml each and has a maximum speed of 9,000 RPM, which can be increased to 13,000 RPM with K and HK models only. It generates a maximum relative centrifugal force (RCF) of 10,413 x g or 21,726 x g with K and HK models. The rotor has a maximum radius of 11.5 cm and a 38° angle to ensure proper sample distribution. This rotor is ideal for processing a relatively small number of samples at a high speed, making it useful in various applications such as biochemistry, microbiology, and molecular biology. Its compatibility with multiple Hermle centrifuge models makes it a versatile tool for research, clinical, and industrial laboratories. INCLUDED: The Hermle 6 x 85ml High Speed Rotor (38°) includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Rephile NuZar U24 water purification system. Type I and RO water from tap water directly. Two ergono (more)mic dispensers with 2.4″ color touch screen with adjustment of dispensing rate (up to 2 L/min), manual and volumetric dispensing. Automatic cleaning cycles for the reverse osmosis membrane (Cl2 and pH cleaning). Self-maintenance functions for maximum efficiency and lifetime of the reverse osmosis membrane. Stable reverse osmosis permeability over a wide temperature range. Automatic data backup up to 2 years. Easy data transfer via multiple interfaces, such as LAN, USB, etc. Intuitive display: water quality with temperature compensation, volumetric dispensing and flow rate. 10 L quality HDPE storage tank integrated into the system, optionally expandable. Ultrapure Water (Type I) applications: HPLC mobile phase preparation, preparation of reagent blank solutions, sample diluent for GC, HPLC, ICP-MS or other analytical techniques, preparation of buffers and culture media for cell culture, and preparation of molecular biology reagents, etc. RO water applications: washing machine for glassware cleaning, feed water for laboratory animals, feed water for humidifiers, autoclaves, etc., water supply for ultrapure water systems, and hydroponics.