Duplex Light Guide 14/15mm, Length 73cm Volpi Cold Light Source Microscope

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Zeiss Standard Fluorescence Microscope w/ 4 x Objectives Lab This was removed from a university lab  (more)where it was surplus to requirements. The unit was never powered up as we do not have the correct supply. It is in good working mechanical It is in good cosmetic condition with marks from use. The microscope features the following. Eyepiece's: 2 x Zeiss Kpl-W10x/18 (46 40 43- 9902) Objectives: Zeiss Ph2 NEOFLUAR 40/0.75 160/0.17 (46 07 21)Zeiss Ph3 NEOFLUAR 100/1.30 Oel 160/- (5233229)Zeiss Ph2 NEOFLUAR 25/0.60 160/0.17 (46 06 21-9902)Zeiss Ph2 Plan 16/0.35 160/0.17 (5067508)

Motic AE21 Series Trinocular Inverted Microscope with 3x Objectives This was removed from a working  (more)lab where it was surplus to requirements. The unit has been tested and is in good working order. It is in very good cosmetic condition with minor marks It is fitted with the following; 1x N.A. 0.30 condenser (WD 72mm) with halogen illumination 6v/30w. 1x Centerable PH slider supplied with phase ring PH 1 2 x Eyepieces - W10x/20 3 x Objectives: 1x Motic E Plan LWD PH 20x/0.40 ∞/1.1 WD 5.51x Motic E Plan PH 10x/0.25 ∞/1.1 WD 6.31x Motic E Plan 4x/0.10 ∞/1.1 WD 14.2

Cambridge Stereoscan 200 SEM Scanning Electron Microscope This system was removed from a university  (more)where it was surplus to requirement. It is in reasonably good cosmetic condition. This item has not been powered on or tested further, therefore it is listed as Spares/Repairs.

This listing is for a Hanna HI93703C Logging Turbidity Meter. The unit is in full working condition (more) and is ready for immidate realese. The Hanna HI93703 Series Logging Turbidity Meters are advanced, microprocessor-based instruments designed to provide laboratory-level precision for turbidity measurements in field conditions. Perfect for environmental monitoring, water quality testing, and various industrial applications, these meters offer an easy and accurate solution for on-site turbidity testing. With its dual operating ranges, the HI93703 ensures versatility for measuring varying levels of turbidity, making it an essential tool for researchers, engineers, and quality control personnel. Key Features: Dual Operating Ranges: The HI93703 series features two measurement ranges: 0.00 to 50.00 FTUs for low turbidity and 50 to 1000 FTUs for high turbidity, accommodating a wide array of sampling conditions. Easy Calibration: The meter allows for straightforward 3-point calibration using AMCO-EPA standards, ensuring accuracy and compliance with ISO 7027 protocols. Enhanced Data Logging: The HI93703-11 model includes a real-time clock and the capability to log up to 199 measurements, facilitating efficient data collection and monitoring. Data Management: Collected data can be easily downloaded to management systems using the Windows® compatible HI92000 software, allowing for comprehensive data analysis and reporting. Good Laboratory Practice (GLP) Compliance: Both versions meet GLP requirements, ensuring last calibration data storage for regulatory adherence. Specifications: Measurement Range: 0.00 to 50.00 FTU 50 to 1000 FTU Resolution: 0.01 FTU (for 0.00 to 50.00 FTU range) 1 FTU (for 50 to 1000 FTU range) Accuracy: ±0.5 FTU or ±5% of reading (whichever is greater) Calibration Points: 3 points (0 FTU, 10 FTU, and 500 FTU) Light Source: Infrared LED Light Detection: Silicon Photocell Battery Type / Life: 4 x 1.5V AA batteries Approx. 60 hours of continuous use or 900 measurements Automatic shut-off after 5 minutes of non-use Operating Environment: Temperature: 0 to 50°C (32 to 122°F) Humidity: RH max 95% non-condensing Dimensions: 220 x 82 x 66 mm (8.7 x 3.2 x 2.6 inches) Weight: 510 g (1.1 lb.)

RMC CR21, CR21 Control, Transformer & Cryochamber Lab These items were removed from a university (more) where they were surplus to requirement. All the units are in reasonably good cosmetic condition. However, they cannot be tested as they all require a connection to the transformer, which is not operational.Therefore, this listing is sold as Spares/Repair. All items included are as follows: Model1#: CR21 ControllerSerial1#: 10521389 Model2#: CR21 Transformer BoxSerial2#: 10521391 Model3#: CR21 CryochamberSerial3#: 10521390

This Costech Instruments Elemental Combustion GC Gas Chromatography System  ECS4010 was removed (more) from a university lab where it was surplus to requirements. The item powers on but has not been tested any further. The lab it was removed from did inform us that most of the equipment removed from the particular lab was in working order. The item is mostly in a reasonable, used cosmetic condition but the right side panel is missing and the back panel is loose. There is a manual included.

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 mg to 200 g for F2 class and lower. The comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator XA 5Y.KO series comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. The comparator features an aesthetic, large weighing chamber and a glass draft shield in one. Its asset is an automatic door opening system. The XA 5Y.KO series features an intuitive menu supporting a user in instrument operation.

Heidolph Hei-VAP Expert Control HL/G3B Coated Hand Lift w/ G3 XL Vertical GlasswareThe Hei-VAP Serie (more)s of rotary evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Hei-VAP Expert Control and Ultimate Control allow to centrally control all process parameters: vacuum, cooling temperature, rotation and heating bath temperature. Promising intuitive operation as all settings are configured centrally on the operating panel. In combination with the Control-Box, the panel can even be used as the central control unit to regulate the vacuum and the Hei-CHILL recirculation chiller as well. All Hei-VAP rotary evaporators have a safety heating bath with overheating and dry running protection, ergonomic handles, double wall and an integrated spout. Separate knobs with intuitive LED ring light system not only allow visual process control, but also direct intervention in the evaporation process at any time. The residual heat indicator operates when the function is deactivated and in standby mode, flashing and the display of the residual heat warn of the risk of burns (50 °C). Features: - 5" touch display - Clear display of all values (Basic/Advanced modes) - Timer - Max. temperature limitation - Multilingual menu with text alerts - Optional display of vapor temperature - USB and Micro SD plus LAN/RS 232 interfaces (Lab 4.0ready) - Control of any vacuum sources and Heidolph recirculation chillers - Solvent library - Favorites memory - Dynamic AUTOaccurate (DAA) - Ramp programming Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Expert Control HL/G3B Coated Hand Lift w/ G3 XL Vertical Glassware includes: - Heating Bath - G3B XL Vertical Glassware - Control Panel - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Vacuum Valve - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty