Modules for HPLC DIONEX Ultimate 3000

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Waters 474 Scanning Fluorescence Detector HPLC This was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and successfully self-tests its ROM, RAM, EM driver, EX driver, lamp energy are good and it reports a lamp operation of 1385.9 hours It is in good cosmetic condition with minor marks.

This Dionex HPLC System was removed from a university lab where it was surplus to requirements. The (more) system is in good cosmetic condition but has some marks from use. Included are; 1 x P680 HPLC Pump.It powers up but has not been tested further. 1 x  ASI-100 Automated Sample Injector.The unit powered up and ran a self-test with no issues. The button inputs are read clearly. 1 x Thermostatted Column Compartment TCC-100.The unit powers up and the LCD screen is clear. We were unable to test it further. 1 x PDA- Photodiode Array Detector.The unit powers up, We were unable to test it further.

Varian ProStar System GC 410, PDA Detector, Solvent Delivery Module System Lab This system was  (more)removed from a university where it was surplus to requirement. All units are in good cosmetic condition and have powered on and passed self-check tests.We are unable to test them further at our facility as the system does not include a PC with relevant software. All units included are as follows: Varian ProStar Model 410 HPLC Autosampler LabP/N - 03-935290-03S/N - 20300 PDA DetectorModel - 330S/N - 00924Good condition. Solvent Delivery ModuleModel - 210S/N - 02241Good condition. Solvent Delivery ModuleModel - 210S/N - 02242Good condition.

Shimadzu Prominence HPLC System - DGU-20A5 - LC20-AT - SPD-20A w/ Software This was removed from a  (more)university lab where it was surplus to requirements. The system is working but we were told that is has been unused for the past 2-3 years but does have all the required accessories and software. It can be a bit temperamental and the last time it was used for teaching it was prone to air bubbles and occasional pressure problems, but likely just needs a service. Included are; Model - Reservoir TrayCat no. 228-45041-91SN - L20304303756 Prominence DegasserModel - DGU-20A5Cat no. 228-45019-32SN - L20244301963Powers on Prominence Liquid ChromatographModel - LC-20ATCat no. 228-45001-38SN - L20114370128Powers onDoor doesn't close properly Prominence UV/VIS DetectorModel - SPD-20ACat no. 228-45003-38SN - L20134303055Powers onDoor hinge is broken so it doesn't stay on Manuals/Software:-LabSolutions LCsolution Release 1.21 SP1USB Dongle LCsolution Multi-LC (SN-L51254300014S7)Shimadzu UV-1650PC Instruction ManualShimadzu User Authentication Tool Instruction ManualShimadzu Gradient Valve Kit for LC-20AD/20AT Installation ManualShimadzu HPLC LC Workstation Administration ManualShimadzu HPLC LC Workstation Operation ManualShimadzu LCsolution LC-Assist Version 2.1 Instruction ManualShimadzu LCsolution QCTool ManualShimadzu LCsolution Version 1.2 Software Release NotesShimadzu LCsolution Chromatography Data System Quick ManualShimadzu On-line Degasser DGU-20A3/DGU-20A5 Prominence ManualShimadzu Solvent Delivery Module LC-20AT Prominence ManualShimadzu UV/VIS Detector SPD-20A/SPD-20AV Prominence Manual Mix of Syringes/Columns:-Hichrom Inertsil ODS2Hamilton Micro Syringe2 x Hamilton 1002RN Syringe 2.5mlHamilton Rheodyne Valve 50ul SyringeSGE Rheodyne Valve 50ul SyringeShimadzu Pathfiner HPLC Column Other bits include:-Raco case full of small parts including tubing, clamps, tools etc.

IKA LAB DANCER vortex mixer 4.5mm vibration orbit Fixed speed range (min-1): 2800 Ø x H: 100 x 70mm  (more)Weight (kg): 0.55 Broken rubber and plastic

Silverson L4RT Homogeniser This item was removed from a university lab where it was surplus to requi (more)rements. The unit is in good used cosmetic condition. It powers up and is in good working order.

Ramp scale with stainless-steel load cells is intended for meat, fish, pharmaceutical, cosmetic and  (more)chemical industry. The scale is equipped with LD4N system allowing lifting the platform up, useful for maintenance purposes. The mechanism enables safe platform lifting and does not require physical exertion or additional equipment. Upon platform lowering, the scale is ready to carry out measurement. There is no need for recalibration. The scale is made of OH18N9 stainless steel and is equipped with PUE H315 indicator. On a customer request the scale can be made of steel of increased anti-corrosion resistance. The length of the cable for connecting the indicator to the platform - 3m. Ramp scale with LD4N system is equipped with only one ramp. Dual range weighing instrument for an additional charge. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform in mild steel powder coated version. The HY10 series scales features mild steel powder coated construction with stainless steel weighing platform. The terminal PUE HY10 series features a 10,1” colourful touch screen display, keyboard with numeric and function keys. The scales enable cooperating with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series are offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.