Carl Zeiss LSM 510 META Confocal Microscope/Laser Module Parts & Accessories NOTE - THIS IS A SPARES/REPAIRS ITEM

Zeiss ConfoCor 2/LSM510 Meta System Parts Faulty Lab These items were removed from a university lab  (more)where they were surplus to requirements. Due to the casing being removed from the ConfoCor 2/LSM510 we are unsure of its operational capabilities and therefore, are unable to conduct any further testing. All other remaining parts are also untested, and therefore, are sold as Spares/Repair. This system features a Class III Laser. Included is the following: - 1 x Zeiss ConfoCor 2  1228-790 - 1 x LSM510 Meta  1228-919 Channel 2 1133-991 Channel 3 1140-340 - 1 x APD Module  1056-471 - 1 x Andor/Micro Point 2205  Laser Illumination and Ablation System. - 1 x Remote Control Switch - 2 x System Interface Plates for an AxioVert 200M.  These allow the ConfoCor & LSM to interface with an AxioVert 200M Microscope. - Various connection cables.

This was removed from. a university lab where it was surplus to requirements. It seems there are som (more)e parts missing. What is included is listed below; Table/Rack on wheelsDimensions - L111 W70 H62cm Fitted inside:-Carl Zeiss ECU-LSM 5 Live PC - Powers on but the Hard drive has been removed. Carl Zeiss LSM 510 META Laser Head Casing - The casing is in bits and it looks like there are parts missing Carl Zeiss Remote for LSM 510 R3.5/LSM 5 Live Box full of all the connection cables Keyboard & Mouse Box of small parts/accessories including:-Software discs and Fujitsu Recovery DVD'sCarl Zeiss MicroImaging LSM 510 META 4.0 Software DongleSeveral USB CablesLots of small parts/accessories

This was removed from a university lab where it was surplus to requirements. All units are in good u (more)sed cosmetic condition but they do have various signs of general use. The system consists of: 1 x Bio-Rad Radiance 2000 Laser Scanning System.1 x Bio-Rad Motorised Focus Unit.1 x Bio-Rad Optical Unit. All of the rubber on the wheels of the Radiance has broken off. The wheels do still roll though. The Bio-Rad Radiance 2000 powers up fine, but was not tested any further.

Leica Microsystems Type - TCS SP2 Confocal Microscope System This was removed from a university lab  (more)where it was surplus to requirements. What is included is in good working order, but the system is not complete. It is missing the following; Table topCooling unitMicroscope isolation tableCameraFlexi tube for prior unit.Bulb for prior unit.There may be more missing parts, but we are unable to confirm. It is in good cosmetic condition with minor marks. Included are; Leica TCS SP2 MicroscopeModel: RCS SP2Serial#: 142400026 Attached to microscope:Leica ∞/0.17/E HCX PL APO 40x/1.25-0.75 OIL CS Leica ∞/-/C HC PL APO 20x/0.75 Leica ∞/0.17/E HC PL APO 10x/0.40 CS 2 x Eyepieces HC PLAN S 10x/22 Leica Condenser 0.53 S 23 (521500)Leica C Mount Adaptor 0.5x : 1/2" = 16 (541511) All other items included: Prior Lumen200Model: L200/CSerial#: 70808 Ernst Leitz Wetzlar GmbhType: 307-072.45Hg 100 W Bulb Leica Power Supply for DiodeLaser COH 405nm, 25mWPart#: 1530910001 03 Leica DM R ManualLeica Confocal SoftwareLeica TCS User Manual Leica PC with Software installed. Leica Dust cover for Microscope and PC.

Zeiss LSM 510 Meta High Resolution Confocal Microscope System This was removed from a university lab (more) where it was surplus to requirements. The units are all generally in reasonably good used cosmetic condition. All parts do power up individually but we could not get the system to run. We believe there should be a PC containing software that we do not have. The lab believed it was suitable to sell only for spares/repairs. The system consists of: 1 x Zeiss Axioskop 2 FS mot Microscope (452314)Fitted with:1 x Zeiss LSM 510 Meta VIS/NLO 1305-590 Scan Head. 1 x Zeiss 1320-560 Fitted with:1 x HBO 100 Lamp1 x Zeiss NDD2 1104867 Detection Module.1 Zeiss NDD3 1104-867 Detection module. 1 x Zeiss 1269-455 Switching Mirror, Fitted with:1 x HAL 100 Lamp1 x Zeiss 1058-431 Transmitted Light Channel LSM/Pascal. The following filter cubes are fitted: 1 - None2 - FITC3 - unreadable4 - DAPI5 - NDD The following objectives are fitted: 1 x Zeiss W Plan-APOCHROMAT421462-990040x/1.0 DIC VIS-IR∞/0 1 x Zeiss 44 00 39ACHROPLAN10x/0,30w Ph1∞/0 2 x Carl Zeiss W-Pl 10x/23 1016-758 Eyepieces. 1 x Zeiss Laser Module RGB 1373-790.Unit appears to be dated Nov 07. 1 x Zeiss Remote LSM 510 R3.5/LSM LIVE 1260-157. 1 X LUIGS & NEUMANN Microscope Remote. 1 x Carl Zeiss 1128-574 SNT 12V 100W Power Supply. 1 x HBO 100 Power Supply. 1 x Carl Zeiss 1298-260 Safety Box. 1 x LASERMODUL NIR. 1 x Carl Zeiss RT-PC 2720.Not sure if this is a spare for the one inside the LSM unit?It does power up and run. The white bench is not included.

Olympus Lext OLS3100 Confocal Microscope w/ MM6-ASPS Controller & OLS3000 PSU This was remo (more)ved from a university lab where it was surplus to requirements. All parts power on and appear to be in working condition. The control unit and emergency stop button are working correctly. The stage control appears to be working correctly with a smooth motor. Only the cables shown are included. The system is in good cosmetic condition, but the rubber foot ends are crumbling. There is no software included with the system. Items included:Main Units:Olympus Lext OLS3100Dimensions: 464(W)x559(D)x620(H)mmWeight: 56.5kg Olympus MM6-ASPS ControllerDimensions: 381(W)x304.8(D)254(H)mmWeight: 14.33kg Olympus OLS3000 Power SupplyDimensions: 355.6(W)x177.8(D)355.6(H)mmWeight: 9kg Accessories:Olympus U-DICROlympus U-P03Olympus U-AN360-3

This was removed from a university lab where it was surplus plus to requirements. All units power up (more) but have not been tested further. The back light is dim but readable. It is in reasonably poor cosmetic condition with  marks from use. Included are; -Dolomite Mitos P-Pump-Dolomite Mitos Sensor Interface-Dolomite Mitos Flow Rate Sensor P-Pump model number- 3200016_6P-Pump serial number- 4903738 Sensor serial number- 4905118

Temperature range: ambient +5ºC to 150ºC Setting range: 15°C to 150°C Temperature stability (at 37°C (more)): ±0.1ºC Temperature uniformity within the block (at 37°C): ±0.1ºC Temperature uniformity across similar blocks (at 37°C): ±0.2ºC Display resolution: 1ºC Heat-up rate (ambient to max): 40 min Block capacity: 2 (not included)

This Thermo Electron Holten LaminAir Flow Safety Cabinet was removed from a university lab where it  (more)was surplus to requirements. The item powers on with air flowing but the screen was flashing red with an alarm when powered on, this stopped when the door was opened. The door & white light works although the door is a bit stiff. It comes with one key. It is in good cosmetic condition but has some marks from use. Internal Dimensions - D64 L150 H60cm Hours? 5542

F1 Mass Standard - knob weights, service case. Nominal value - 100 kg.

IKA R 1381 Propeller 3 - Bladed Stirrer Flow-efficient design. For drawing the material to be mixed (more) from the top and the bottom. Minimum shearing forces. Used at medium to high speedsStirrer Ø: 45 mmShaft Ø: 8 mmShaft length: 350 mm INCLUDED: The IKA R 1381 Propeller 3 - Bladed Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote