Microplate equipment

Accuris MR9620 SmartReader Multimode Microplate Reader w/ PC Software Included Detection Modes Absor (more)bance, Fluorescence, Luminescence Microplate Formats 6, 12, 24, 48, 96, and 384-well Plate Incubation Ambient +4°C to 45°C Features - Intuitive, 10-inch color touch screen - Stand-alone system with optional PC software (FDA CFR Part 11) - Monochromator-based system for UV through visible absorbance - Filter module system for fluorescence assays - Advanced PMT detector for luminescence assays - Optional automatic injection modules for flash luminescence - 2 Year Manufacturer's Warranty

Accuris MR9611 SmartReader Microplate Reader UV-Vis with Cuvette Port & PC Software Included For (more)mats Accepted 96-Well, 384-Well Flat Bottom Plates, Cuvettes Display 10-inch High Resolution Color Touch Screen Wavelength Range 200 - 1000 nm, 1 nm Steps Features - Intuitive, 10-inch color touch screen control panel - Accepts both 96 & 384-well plates as well as cuvettes - Monochromator-based system - No filters required - Wavelength range from 200 to 1000 nm - Stand-alone design - No PC or special software required - USB port for flash drive data transfer - SmartDrop™ Accessory Plate available for DNA/RNA Quantification/Purity Analysis The Accuris SmartReader UV-Vis Microplate Reader with Cuvette Port (Model MR9611) has been designed with ease-of-use and fast results in mind. This instrument brings extensive capabilities to the lab bench and is designed for the busy lab with multiple users. The large touch screen command center is extremely user-friendly and allows for fast set up of new protocols, as well as modifying and running existing protocols. The monochromator-based optical system allows for precise selection of wavelengths from 200nm to 1000nm, with no filters required. This range makes the SmartReader UV-Vis useful not only for typical ELISA , Bradford Lowry, and turbidity assays but also for more advanced applications such as quantitation of nucleic acids and proteins. The SmartReader UV-Vis can be set for Endpoint, Kinetic and Spectral Scanning assays. The MR9611 is designed for efficient processing of multiple samples and accepts standard 96 well plates, 384 well plates, as well as cuvettes for high density screening. The plate layout interface allows for a quick and intuitive setup of a plate well’s contents. Users can highlight and label multiple wells to save time. The display shows a graphical representation of the plate. Users can label each well as required for: “known standard”, “unknown sample”, “blank well” , “QC Control well”, “positive control”, “negative control”, and “empty”. Controllable plate shaking and incubation allow for optimization of assay results. Theshaking speed can be controlled at different intensities with options for timed and pulsedshaking before a reading, or in between readings when performing a kinetic assay. Thelinear motion efficiently and uniformly mixes all samples in both 96 and 384 well plates.Temperature can be controlled from ambient +5°C up to 45°C, allowing for the processingof enzyme kinetics, and bacterial growth assays. INCLUDED: The Accuris MR9611 SmartReader Microplate Reader UV-Vis with Cuvette Port & PC Software Included includes: - SmartReader PC Software for MR9611 - Cuvette Port - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris MR9610 SmartReader Microplate Reader UV-Vis w/ PC Software Included Plates Accepted 96-Well  (more)and 384-Well Flat Bottom Plates Display 10-inch High Resolution Color Touch Screen Wavelength Range 200 - 1000 nm 1 nm Steps Features - Intuitive, 10-inch color touch screen control panel - Accepts both 96 & 384-well plates - Monochromator-based system - No filters required - Wavelength range from 200 to 1000 nm - Stand-alone design - No PC or special software required - USB port for flash drive data transfer - SmartDrop™ Accessory Plate available for DNA/RNA Quantification/Purity Analysis The Accuris SmartReader UV-Vis Microplate Reader (model MR9610) has been designed with ease-of-use and fast results in mind. This instrument brings extensive capabilities to the lab bench and is designed for the busy lab with multiple users. The large touch screen command center is extremely user-friendly and allows for fast set up of new protocols, as well as modifying and running existing protocols. The monochromator-based optical system allows for precise selection of wavelengths from 200nm to 1000nm, with no filters required. This range makes the SmartReader UV-Vis useful not only for typical ELISA , Bradford Lowry, and turbidity assays but also for more advanced applications such as quantitation of nucleic acids and proteins. The SmartReader UV-Vis can be set for Endpoint, Kinetic and Spectral Scanning assays. The MR9610 is designed for efficient processing of multiple samples and accepts standard 96 well plates as well as 384 well plates for high density screening. The plate layout interface allows for a quick and intuitive setup of a plate well’s contents. Users can highlight and label multiple wells to save time. The display shows a graphical representation of the plate. Users can label each well as required for: “known standard”, “unknown sample”, “blank well” , “QC Control well”, “positive control”, “negative control”, and “empty”. Controllable plate shaking and incubation allow for optimization of assay results. Theshaking speed can be controlled at different intensities with options for timed and pulsedshaking before a reading, or in between readings when performing a kinetic assay. Thelinear motion efficiently and uniformly mixes all samples in both 96 and 384 well plates.Temperature can be controlled from ambient +5⁰C up to 45⁰C, allowing for the processingof enzyme kinetics, and bacterial growth assays. INCLUDED: The Accuris MR9610 SmartReader Microplate Reader UV-Vis w/ PC Software Included includes: - SmartReader PC Software for MR9610 - Operator's Guide - Power Cord - 1 Year Manufacturer's Warranty

Accuris SmartReader 96 Microplate Absorbance Reader with Incubation - PC Software IncludedFeatures - (more) For ELISA Testing - Intuitive, 7 inch color touch screen control panel - Filter based system with wavelength range from 340 to 750nm - Operates as a stand alone system, with USB flash drive drive for data transfer - Absorbance range: 0.0 to 4.000 Abs - 8 channel vertical optical path, with zero dispersion - Integrated, multi-speed plate shaker - Temperature controlled plate incubation Plate absorbance results are easily visible on the reading result screen and conveniently placed in grid format for quicker readability. The plate layout interface allows for quick and intuitive set up of a plate’s well contents. The display shows a graphical representation of the 96 well plate, and the user can label each well as required. Measurement data is available immediately on the screen after a reading, as well as interpretations, calculated analysis and curve fittings. The SmartReader 96 comes complete with 4 popular filters: 405,450,492,630nm and twenty six additional filters are available separately to cover a full range from 340 to 750nm. The integrated filter wheel allows up to 8 filters to be loaded at once, and filters can be selected during programming. Use the touch screen, or connect a mouse for programming and operation. The menu interface allows the user to choose the wavelength filter, set shaking parameters, enter details of the plate layout, and also choose the details for the reading protocol and data calculations.Model MR9600-T offers precise temperature control for incubation of plates during processing. Temperature can be maintained at 5°C above ambient to 50°C. Up to two filters can be used for 2 measurements of the sample plate, for calculated comparisons. Kinetic calculations can be performed by setting multiple readings. The SmartReader 96 is a convenient stand alone reader, all software and the programing system is incorporated into the electronics. However, a convenient USB port on the side allows quick and easy saving of data files to a USB drive, and the universal .csv files can then be shared or transferred to a computer for storage or further processing. A data port can be used for connecting a computer or basic printer.

Accuris SmartReader 96 Microplate Absorbance Reader w/ Software IncludedFeatures - For ELISA Testing (more) - Intuitive, 7 inch color touch screen control panel - Filter based system with wavelength range from 340 to 750nm - Operates as a stand alone system, with USB flash drive drive for data transfer - Absorbance range: 0.0 to 4.000 Abs - 8 channel vertical optical path, with zero dispersion - Integrated, multi-speed plate shaker Plate absorbance results are easily visible on the reading result screen and conveniently placed in grid format for quicker readability. The plate layout interface allows for quick and intuitive set up of a plate’s well contents. The display shows a graphical representation of the 96 well plate, and the user can label each well as required. Measurement data is available immediately on the screen after a reading, as well as interpretations, calculated analysis and curve fittings. The SmartReader 96 comes complete with 4 popular filters: 405, 450, 492, 630nm and twenty six additional filters are available separately to cover a full range from 340 to 750nm. The integrated filter wheel allows up to 8 filters to be loaded at once, and filters can be selected during programming. Use the touch screen, or connect a mouse for programming and operation. The menu interface allows the user to choose the wavelength filter, set shaking parameters, enter details of the plate layout, and also choose the details for the reading protocol and data calculations. Up to two filters can be used for 2 measurements of the sample plate, for calculated comparisons. Kinetic calculations can be performed by setting multiple readings. The SmartReader 96 is a convenient stand alone reader, all software and the programing system is incorporated into the electronics. However, a convenient USB port on the side allows quick and easy saving of data files to a USB drive, and the universal .csv files can then be shared or transferred to a computer for storage or further processing. A data port can be used for connecting a computer or basic printer. The plate layout interface allows for quick and intuitive set up of a plate’s well contents. The display shows a graphical representation of the 96 well plate, and the user can label each well as required for: “known standard”, “unknown sample”, “blank well”, “QC control well”, “negative control”, “positive control”, or “empty”. The interface allows highlighting and labeling multiple wells to save time. Measurement data is available immediately on the screen after a reading, as well as interpretations, calculated analysis and curve fittings. Click Here to View Product Video INCLUDED: The Accuris SmartReader 96 Microplate Absorbance Reader includes: - 405, 450, 492 and 630nm filters - PC Software - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

MicroFill is an economical, compact, and reliable dispenser for 24-, 96-, and 384-well microplates.  (more)An autoclavable fluid path is ideal for applications that require sterility. The dispense flow rates are easily selected to accommodate sensitive cell-based assays or vigorous dispensing for ELISA. Accurate and precise dispensing are guaranteed, without the time-consuming recalibration, cassette replacement, and maintenance commonly associated with other dispensers. Intuitive, on-board software is easy to use and saves time in instrument setup. Microplate Types: 24-, and 96-well, Low-profile, standard, and deep-well formats Manifold Type: One 8-tube (1 x 8) manifold−316 stainless steel tubes Dispense Speed: 96 wells, 10 µL/well, 1 x 8: 8 s Volume Range 5−6,000 µL/well, Minimum prime volume: 10 mL Flow Rates: User-programmable rates from high to low Dispense Accuracy: ± 1 µL at 5 µL, ± 1 µL at 20 µL, ± 1% at 100 µL Dispense Precision: ≤ 5% CV at 5 µL, ≤ 2.5% CV at 20 µL, ≤ 1% CV at 100 µL Dimensions (DxWxH): 460 x 380 x 180 mm Weight: 8.9 kg

Wavelength range excitation: 250 – 850 nm Wavelength range emission: 360 – 850 nm Wavelength bandwid (more)th: 9 nm Dynamic range: 6 decades Sensitivity top read: 3 fmol/well FITC Detector: Photomultiplier tube Read types: endpoint, kinetic, spectrum scan, well scan Wavelength selection: Monochromator tunable in 1-nm increments Light source: Xenon flash lamp Read time: 15 seconds Dimensions (HxWxD): 340 x 420 x 420 mm Excluding software As-is

The Biochrom Expert 96 is a PC- controlled modern design multi-channel microplate reader, for fast p (more)late reading of standard ANSI SBS footprint 96 well, flat, round and v-bottomed plates. The Biochrom Expert 96 has four shaking modes for mixing of solutions and the ability to perform readings at timed intervals ideal for kinetic assays.

The SkanWasher 300 is an automatic 96-well microplate washer designed to give reliable, reproducible (more) results, with no cross-contamination between wells, and no carryover from plate to plate. The washer incorporates flexible software, and can handle most requirements for kit manufacturers, and research and clinical scientists. The SkanWasher 300 has eight user-defined programs, two inlets for buffer and rinse, and a special rinse program. The fluid pressure can be adjusted individually for each program, making it suitable for very gentle washing, as well as tougher, more turbulent washing. Washes all 96 wells simultaneously 8 user defined programs with 16 steps per program. Wash steps set by either time or volume (100 – 1000 ml) Versatile dispense-only function provides < 4% CV dispense accuracy and precision across the plate Easy to maintian: preset factory rinse program and removable wash head Wash head & manifold combined in one module, thereby reducing risk of contaminant growth Unique double probe washing system provides maximum washing efficiency with minimal reagent consumption Aspirate from top of liquids to avoid cross-contamination of wells Easily-accessible wash head channels for easy cleaning Motorized plate carriage, adjustable for flat & round bottomed plates Quick-disconnect fittings to avoid spills Capacity: 96-well Microplates Soak Time: Programmable to 3 Minutes Dimensions (WxDxH): 660 x 330 x 610 mm

Light source: High energy xenon flash lamp Detector: Silicon photodiode Wavelength selection: Single (more) High-Speed Monochromator Wavelength range: 200 – 1000 nm, selectable in 1 nm steps Wavelength accuracy: ≤0.8 nm Wavelength reproducibility: ≤0.5 nm Bandwidth: Fixed, 3.5 nm Measurement range (OD): 0 – 4 OD Measurement time (96-well plate, 1 flash): <14 seconds Measurement time (384-well plate, 1 flash): <30 seconds Fast Scan (200 – 1000 nm, 1 nm steps): <5 seconds OD accuracy (0 – 0.8 OD, 96-well plate): ±0.008 OD OD accuracy (0.8 – 2.5 OD, 96-well plate): <±1.0% OD accuracy (2.5 – 3.0 OD, 96-well plate): <±1.5% OD accuracy (at 260 nm): ≤0.5% OD precision (0 – 1.2 OD, 96-well plate): <±0.006 OD OD precision (1.2 – 3 OD, 96-well plate): ±0.5% OD precision (at 260 nm): ≤0.2% OD linearity (0 – 3 OD, 96-well plate, at 260nm): R-2 > 0.999 OD uniformity (96-well plate, at 1 OD): <3% Sample formats: SBS standard microplates from 1- to 384-wells,NanoQuant low-volume plate Microplate shaking: Linear, orbital and double orbital shaking; variable amplitudes and frequencies Stirring speed regulation: 50 – 1000 rpm Lid lifting system – maximum height of microplate and lid: 24.5 mm Temperature control – heating range: Ambient +4°C up to 42°C Temperature control – uniformity: <0.5°C at 30°C and 37°C at incubation position Dimensions (WxDxH): 494 x 557 x 395 mm Weight: 40 kg Software included

Caliper Life Sciences Twister II is more than a super-fast, high capacity plate stacker. It’s real p (more)lug-and-play desktop automation. The Twister II Microplate Handler was designed to address the need for a microplate handler with multiple instrument capability, increased speed and capacity, and amazingly simple software. Add a liquid handler and a washer or reader, and you’ve got a system that can handle almost any manual assay step. Twister II can serve as the hub for a new breed of ‘Mini-Systems’. This low-cost microplate handler provides a time saving alternative to stackers and a money saving alternative to larger, more complex integrated systems. Minimum Reach: 305 mm Arm Travel: 216 mm Horizontal, 559 mm Vertical Wrist Rotation: ±135° (270° total) Protrusion Beyond Rotation Point: 38 mm (flush with plate edge) Turret Rotation: 340° with 20° Hard Stop Turret Diameter: 178 mm Turret Height: 996 mm Base Dimensions: 254 mm Diameter Min. Reach Height: 165 mm Max. Reach Height: 711 mm

Apply consistent, secure, tight seals around individual wells, eliminating sample loss through evapo (more)ration and cross contamination between wells. The Thermo Scientific ALPS 50 V Microplate Heat Sealer is designed to provide sealing consistency in low to medium throughput labs. Heat sealing offers superior sample protection of storage and reaction plates in applications including compound storage, sample archiving and PCR. Choose from a wide range of heat seals (including pierceable, optically clear and permanent) for any application. Sealing Temperature Range: 125° to 200°C Dimensions (HxWxD): 425 x 220 x 325 mm Weight: 7.2kg

The BTX HT-200 plate handler allows for the Highthroughput System HT 25 or HT 96 for advanced molecu (more)lar delivery. The HT 96 (96-well) plates or the HT 25 (25-well) plates can be electroporated using a BTX generator (models: ECM 830 and ECM 630) with a plate handler. The Model HT-200 automatically switches columns in a Multi-well plate during electroporation using the Auto-track sensing featute. The Auto-track sensing allows rapid electroporation of an entire plate by setting up all columns and pressing one button. Voltage Range: 0 to 3000V DC Pulse Length Range: 10 µsec to 10 sec Pulse Number Range: 1 to 99 Dimensions (WxDxH): 230 x 215 x 140 mm Weight: 4.8 kg Including: 1x 96-Well Disposable Electroporation Plates, 4 mm, 250 µl, pkg. of 1 1x 96-Well Disposable Electroporation Plates, 2 mm, 125 µl, pkg. of 1 1x HT 25-Well Adapter for Plate Handler

2x Plate washer uWasher DG-34 Grifols (One in good condition, 1 for parts)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW